CIPDB › China Industry › Chemicals › Inorganic Fiber
Cellulose Fiber Ceramic Fiber Used for Friction Material Brake Lining1
Inorganic FiberCeramic FiberFriction Material
Shijiazhuang Deyoute New Material Technology Co., Ltd.
Preview:
Product Description Ceramic fiber(CF-1010 ,CF-1020,CF-1025,CF-1035) Aluminum silicate fiber, raw materials to kaolin, coke gem, pyrophyllite and other high aluminum content of silicate ore as raw materials, silicon dioxide and alumina content is more than 96%.Chemical composition :SiO2 Al2O3Fe2O3 Na2O+K2O45%-55%40-50%0.8%-1.0%0.2%-0.5%Characteristics and applications:It has low heat conductivity, thermal stability, chemical stability, and no causticity. Brake linings made from ceramic fiber have high temperature resistance and decentrality, can be used in brake linings which requires high temperature resistance and heat recovery capacity, it also can be used in all types if mixerRecommendatory dosage:Brake drum: 20-35%Brake disc: 10-25%Technology Indicators: CERAMIC FIBER(CF-1025):ProjectIndex(%)The average fiber length0.15--2.5mmThe average fiber diameter4-9umFiber distributionD50Specific Gravity0.25-0.45g/m3Fiber moisture≤1.0Fiber diameter2-4umFiber loss-on-ignition<0.5,(800/H)Softening Point>1750TemperaturePH7Fiber Asbestos Content0Shot Content;>120mesh<20Surface density(state of compression)0.13-0.20g/ cm3 Ceramic Fiber(CF-1010)ProjectIndex(%)The average fiber length0--1mmThe average fiber diameter4-9umFiber distributionD50Specific Gravity0.45-0.55g/m3Fiber moisture≤1.5Fiber diameter2-4umFiber loss-on-ignition<0.5,(800/H)Softening Point>1750TemperaturePH7Fiber Asbestos Content0Shot Content;>120mesh<30Surface density(state of compression)0.25-0.40g/ cm3Ceramic Fiber(CF-1020)ProjectIndex(%)The average fiber length0.10--2.0mmThe average fiber diameter4-9umFiber distributionD50Specific Gravity0.25-0.35g/m3Fiber moisture≤1.0Fiber diameter2-4umFiber loss-on-ignition<0.5,(800/H)Softening Point>1750TemperaturePH7Fiber Asbestos Content0Shot Content;>120mesh<25Surface density(state of compression)0.25-0.35g/ cm3Package: 25kg*40nos packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped . Storage:Ceramic Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.Industrial Safety and Environment Protection: Risk of explosion by static sparks or ignition sources Use only explosion -proof equipment . Use with local exhaust ventilation.Wear protective eyeglasses or chemical safety goggles .A safety data sheet will be made available on request: This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.Cellulose Fiber: It is made of high quality newsprint crushed, with moderate price and no environmental pollution. It is a high quality asbestos substitute, suitable for non-asbestos friction materials, especially for ceramic fiber and other mineral fiber reinforced friction materials.Cellulose fiberMain components: Nature CelluloseCharacteristics and application:Easily dispersed, no need pre-open-processing, good cold-enhancing effect and high intensity, it can improve the intensity of the brake linings and used better than other products.Recommendatory dosage: Brake drum: 5-20% ,Brake disc: 3-10%Technology Indicators:ProjectIndicatorsAppearanceGary WhiteSpecific Gravity1.4g/ cm3Loose Density600-800 cm3/100gFiber length 0.65-1.8mmSurface density(state of compression)0.16-0.19g/ cm3105oC Volatiles<10.9%800oC Calcination<0.9%Fiber diameter3-12μmP H5.1Main ingredientsH 7% C 41% O 52%Package: 10-12kg/bag packed in 3 ply sacks stacked on a wooden pallet wrapped ,strapped and shrink wrapped .Storage:Mineral Fiber must be stored in a cool,dry place .To prevent moisture penetration .packs which have opened should be sealed again as soon as possible.Industrial Safety and Environment Protection: Risk of explosion by static sparks or ignition sources Use only explosion -proof equipment . Use with local exhaust ventilation.Wear protective eyeglasses or chemical safety goggles .A safety data sheet will be made available on request: This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses .It should mot therefore be construed as guaranteeing specific properties of the products described or their suitability for a particular application .Any existing industrial property right must be observed . The quality of our products is guaranteed under our General Condition of Sale.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...