CIPDB › China Industry › Chemicals › Inorganic Fiber
Carbon Fiber Reinforcement1
Inorganic FiberCarbon FiberCarbon Fiber Fabric
Qingdao Lookingforward New Material Technology Co., Ltd.
Preview:
Product Description Basic information Model No.Carbon Fiber ReinforcementTransport PackageWoven BagMaterialCarbon 12kStandardASTM GM13ColorBlack or customizeApplicable IndustryReinforceWidth10cm, 20cm, 30cm, 50cm, 100cmTrademarkLKDelivery TimeWithin 15dayOriginShandong, ChinaHS Code6815120000Production Capacity5000sqm/Day What is carbon fiber cloth? Carbon fiber cloth reinforcement repair concrete structure technology is a new and efficient structural reinforcement repair technology, which is the use of resin adhesive materials to paste carbon fiber on the concrete surface, the use of carbon fiber good tensile strength to enhance the bearing capacity and stiffness of the component, in order to achieve the purpose of reinforcement of the structure and components, compared with the traditional reinforcement method, with high strength and efficiency, convenient construction, high work efficiency, good durability and other outstanding advantages. In recent years, carbon fiber composites have been widely used in the reinforcement of building concrete structures. The external carbon fiber reinforced composite reinforced concrete technology is to paste the fiber reinforced composite sheet on the outside of the concrete structure, and the two are synergistically stressed to achieve the purpose of reinforcement. Carbon fiber cloth has the characteristics of high tensile strength (its tensile strength is about ten times that of ordinary steel), high strength, high elastic modulus, light weight and good corrosion resistance, which provides a prerequisite for the reinforcement of reinforced concrete structures by pasting carbon fiber cloth. However, after the carbon fiber material is woven into carbon fiber cloth, it is difficult for the carbon fiber filaments in it to work together completely. When the structure is subjected to load, a part of the carbon fiber filament with a higher stress level first reaches its tensile strength and exits the working state, and with the increase of the load, each carbon fiber filament gradually breaks until the overall failure. After using the adhesive, the carbon fiber can form a composite whole with the concrete, and can work well together to improve the bending and shear bearing capacity of the structural components, and achieve the purpose of reinforcing and reinforcing the structural components. Carbon Fiber Technical Data Sheet Performance itemsCFS-I-300CFS-I-200CFS-II-300CFS-II-200Strength ClassHigh strength gradeHigh strength gradeHigh strength grade IIHigh strength grade IIGrammage (g/m2)300200300200Theoretical thickness (mm)0.1670.1110.1670.111Tensile strength (MPa)GB≥3400≥3400≥3000≥3000Test data3870371032163325Modulus of Elasticity (GPa)GB≥2.4*105≥2.4*105≥2.1*105≥2.1*105Test data2.45*1052.41*1052.1*1052.40*105Elongation (%)GB≥1.7≥1.7≥1.5≥1.5Test data1.741.71.71.74Tensile strength design value Ef(MPa)Important components16001400General components23002000Modulus of Elasticity Design Value Ef(GPa)Important components2.3*1052.0*105General componentsAnti-strain design value εfImportant components0.0070.007General components0.0010.001 Advantages Of Carbon Fiber ReinforcementConvenient construction Carbon fiber reinforcement is light in weight and can be operated in a small space, which is very convenient for construction.Very high strength and flexible use for flexural, closed hoop and shear reinforcement.There is no wet work, no need for large construction tools, no need for on-site fixed facilities, carbon fiber cloth can be arbitrarily cut, the construction is simple, and the construction period is short.Good construction quality Carbon fiber reinforcement is flexible and can wrap around components with complex shapes.Because the carbon fiber cloth is soft, even if it is reinforced on an object with an uneven surface, it can also ensure effective pasting, such as air bubbles on the surface of the paste, you can easily use a syringe to inject the paste agent to drive the air away and it is difficult to paste the steel plate.Wide range of application Carbon fiber reinforcement is suitable for a wide range of component surfaces.Resistant to chemical corrosion such as acid and alkali and harsh environments (pollution-free).Long storage life and long permissible operation period.The substrate can be concrete, masonry, timber and other multi-structural materials.Thin thickness and light weight Carbon fiber reinforcement is light in weight and can be operated in a small space, which is very convenient for construction.Very high strength and flexible use for flexural, closed hoop and shear reinforcement.The tensile strength of carbon fiber cloth is 7-10 times higher than that of ordinary steel, and the elastic modulus is close to that of steel, which is suitable for reinforcement and repair of reinforced concrete. Carbon Fiber Applications 1. Carbon fiber fabric is used for bending and shear reinforcement of concrete structures, and is widely used for the reinforcement of earthquake-proof, anti-cracking and anti-corrosion of various industrial and civil buildings and structures.2. Reinforcement of beams, columns and panels of concrete structures, bridges and buildings.3. Reinforcement of tunnels, harbor facilities, chimneys, warehouses, and factories.4. Protection and reinforcement of salt-damaged concrete, bridges and river structures. Carbon Fiber Fabric Directions for Use 1. Before pasting carbon fiber, the related direction work such as cleaning of structural surface attachments and chiseling of paint layer should be completed, and the solid structural surface of the component must be exposed. Grind off the surface of the structural components of the floating pulp layer, burrs, stains, etc., to ensure that the structure surface is smooth and clean, the positive corner of the components should be polished into a radius of not less than 20mm small rounded corners, after the grinding is completed, with a strong hair dryer for detailed cleaning treatment.2. Chiseling and repair the original structural surface.Repair materials such as structural adhesive or 42.5# cement to smooth the surface to ensure that the structural surface of the components is smooth and without cracks, so as to facilitate the smooth transition of carbon fiber cloth. 3.Test and paste the position lineAccording to the design requirements of the drawing, paste the position line. 4. Carbon fiber cloth cuttingAccording to the requirements of the drawing, the actual section size and span (length) of the reinforced component were measured on site.According to the cutting list, the cutting construction of carbon fiber cloth was completed. Carbon fiber cloth should be placed on a flat, clean and solid plane for blanking to avoid contamination and minimize blanking errors. 5. Mixing the Carbon fiber adhesive according to the mixing ratio ,ensure that the AB group are evenly mixed6. Apply the epoxy resin adhesive Use a plastic scraper or roller to evenly apply the prepared epoxy resin adhesive on the surface ofthe component, the adhesive layer must be uniform, full, no bubbles, when applying epoxy resin adhesive, the structural surface of the component must be dry if the moisture content of the component surface is greater than 4%, measures should be taken to dry. 7. Paste carbon fiber clothPaste the carbon fiber cloth from one end to the other, adhesive surface covered with epoxy resin adhesive, and scrape the carbon fiber cloth with a scraper along the direction of the fiber,force until the epoxy resin adhesive is completely soaked in the carbon fiber cloth to ensure that the carbon fiber cloth and the structural surface are tightly pasted. 8. Within 1 hour after the carbon fiber cloth is pasted, apply epoxy resin adhesive or paste the second layer of carbon fiber cloth, track and check the paste quality. If the surface of the carbon fiber cloth needs covert processing, it should be sprinkled with sand and roughened within 30-45 minutes after applying the epoxy resin adhesive. 9. Static curingWithin 2 hours of pasting the carbon fiber cloth, no disturbance is allowed, and the component should not be loaded within 3 days.10.Inspection and acceptanceAfter the construction of carbon fiber cloth paste is completed, paste quality inspection and acceptance should be carried out 7 days later. According to the requirements of the code, the carbon fiber cloth paste hollow drum ratio (the ratio of the total hollow drum area to the total paste area) is not greater than 5%. 11.When the temperature is below 5 ° C, heating measures can be taken or the mixing ratio of the adhesive can be adjusted appropriately to ensure the paste quality of the carbon fiber cloth. Carbon fiber with epoxy resinIn the process of using carbon fiber glue, the following points need to be noted:1. Stirring: Before the mixing of the epoxy resin adhesive, stir group A evenly to avoid long-term precipitation (group B does not need to stir).2. The ratio: According to the ratio of 2:1,weighing and placed in the container, with the blender evenly stir until the color is uniform. There should be no oil or impurities in the container.3. Temperature: The temperature is required to be above 5 oC.4. Aging: After the adhesive ratio, it takes 20 minutes to use up in summer, and 30 minutes to use up in spring and autumn. Please control the using time to ensure the quality.5. Storage: After opening the epoxy resin adhesive,it should be sealed storage, away from the fire source, avoid direct sunlight---------- FAQ ----------01: Are you a factory or trading company? Where is your company located?We are a professional manufacturer that specialized in carbon fiber sheet,prepreg carbon fiber cloth and CNC carbon fiber products etc with ISO9001 certificate more than 8 years.02: Can you provide a sample for us?Yes,We can send free samples,but customer need to pay the freight.03: Can you do OEM?Yes, We can produce the products as your request.04: What is your payment terms?T/T,Western Union,Paypal,L/C...05: What is your delivery time?Production time usually costs 2-20 days based on the order.06: Where is your factory located? How can l visit there?Welcome to visit our factory and it is our great pleasure.Our facoty is located is Dezhou City, Shandong Province.07: What's your MOQ? Can l order small quantity for testing at first order?For new client, we accept small order for building mutual trust and long-term business relationship.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...