CIPDB › China Industry › Chemicals › Rubber & Rubber Products
Free Sample Colored Soft Medium Hard NR Rubber Sponge Cleaning Ball for Condenser High Pressure Pipe1
Rubber Rubber ProductsSponge Rubber BallCleaning Ball
Qingdao JinYuan Rubber Co.,Ltd.
Preview:
Product Description Product ParametersSponge Pipe Cleaning Ball Rubber Ball Characteristic: 1. Strong Water Absorption2. Easy To Use3. Stable Operation4. Aging Resistance5. Soft Texture6. Strong Wear Resistance7. Good Descaling PerformanceOur diameter Φ 7mm - Φ 38mm rubber sponge ball and carborundum sponge ball, which have the advantages of soft texture, moderate elasticity, strong wear resistance, good water absorption, good descaling performance, etc., are today's experts in cleaning the condensing copper tubes of steam turbines. When hard scales are formed, carborundum balls can be used for cleaning. At present, this product has been sold well in power generation, chemical industry, metallurgy and other fields nationwide and is very popular, and has become an indispensable production tool in these industries, At the same time, it is also a necessary product for these industries to save energy, reduce labor intensity and improve equipment utilization. The product quality has passed the test. It is soaked in 80 oC water for one week, and its expansion coefficient is 0.5 mm-1 mm. It can be used in fresh water and sea water.Inspection Table for Performance Parameters of Sponge Rubber Ball Serial NoIndex NameValue1Model: RY -, RY-Pipe Cleaning Ball2Manufacturer Brand:JINYUAN RUBBER3Diameter Tolerance±0.2mm4Elongation At Break≥450%5Constant Extension Strength≥16mpa6Hardness30-60sha7Permanent Deformation≤10%8Coefficient Of ExpansionSoak In Water Below 80 oC For 48 Hours, And The Diameter Shall Not Increase By More Than 0.4 mm9Aging Coefficient≥0.510Dry Specific Gravity≤0.3511Wet Specific Gravity≤1.1012DensitySoft 150KG/m3, medium soft 200KG/m3, medium hard 250KG/m3, hard 300KG/m313MaterialRubberNote: Due to the high PH value or other reasons, the scaling on the inner wall of the condenser cooling pipe is relatively hard, so the emery and sponge ball (peeling ball), silicified ball and sponge ball (peeling ball) can be used together.Eccentric Ball Performance Parameter Inspection Table:Serial NoIndex NameValue1Model: RY -, RY-Pipe Cleaning Ball2Manufacturer Brand:JINYUAN RUBBER3Diameter Tolerance±0.1mm4Elongation At Break≥470%5Constant Extension Strength≥30mpa6Hardness80sha7Permanent Deformation≤5%8Coefficient Of ExpansionSoak In Water Below 80 oC For 48 Hours, And The Diameter Shall Not Increase By More Than 0.01 mm9Aging Coefficient≥0.510Dry Specific Gravity≥1.011Wet Specific Gravity≥1.012DensityHard 1000KG/m313Material/ Our AdvantagesWe have a fully-equipped workshop that meets ISO 9001:2015 and IATF 16949:2016 requirements. All products are compliantwith FDA, WRAS, UL, RoHS and REACH standards, and meet DIN, JIS and ASTM regulations. Material report and dimensionchecking report are available.1. Quality Approvals. More than 15 years professional manufacture experience.2. Experienced Staff and Service. Professional R&D team, production team, sales team, after-sales service team.3. Product Performance and affordable cost. Superior performance with most competitive price.4. Prompt Delivery. Faster delivery time. 5. Small Orders Accepted. ProductNameRubber BallMaterialSilicone,NBR, PUR, FKM, HNBR, CR, SBR, EPDM, NR, ACM, PVC, FFKM etcMaterial ReportFDA, ROHS, UL, WRAS and REACHSupplying CapacityOne Million Pieces/ MonthToleranceGenerally±0.05mm or BetterApplicationsTransportation, Medical, Oil, Gas & Industrial,auto parts,household,etcSizeStandard Sizes or As per customers' RequirementCertificatonISO9001,IATF16949,ISO14001ColorAny colors according to PANTONE or RALSurface FinishTexture (vdi/mt Standard, or Made to Client's Sample), Polished (high Polish, Mirror Polish), Smooth, Painting, Powder Coating, Printing, Electroplating Etc.ServiceCustom Made or OEM and ODMProduction WaysCAD Drawing, 3D Files or SamplesShapeAll Shapes As Per DrawingHardness20~90 Shore A,Usually 30~80 Shore ADelivery time15 Days for Molding, 15-20 Days for Series ProductionMOQ500 PiecesTemperature-40oC~+230oCFree SampleYesPackageAs Your RequestMarketEurope, America,OceaniaQCPPAP, In House Control, Third Party Inspection Institution such as SGS, TUVMoldMolding ProcessCompression Rubber Molding,Transfer Rubber Molding, Injection Molding, Extrusion MoldMould TypeProcessing Mold, Injection Mold, Extrusion MoldMachines 200T,300T and 500T Compressing Molding, Injection Molding, Auto Vacuum Vulcanizing, Plastic Injection, and ExtrusionTooling EquipmentRubber Tension Tester, Rubber Vulcanization Instrument, Durometer, Calipers, Ageing OvenCavity1~400 CavitiesMould Life300,000~1,00,000 TimesProductionProduction CapacityFinish Each Mold of Product in 2.5 Minutes and Working on 2 Shafts with 24 HoursMold Lead Time10~30 DaysSample Lead Time3~5 DaysProduction TimeUsually 10~30 DaysLoading PortQingdao PortMore PartsGrommet, sleeve, feet, gasket, wheel, bellow, cap, dust cover, pad, washer, Strip, plug, stopper, grip, seal, bushing, bumper, blocks, and anti vibration mounts etc.Type Of Rubber Ball( Φ 7- Φ 38mm)1. Light Rubber Ball (ordinary Sponge Rubber Ball)An Appropriate Amount Of Wear-resistant Material Is Added To The Smooth Rubber Ball, Which Makes It Easier To Remove The Deposition And Scaling In The Tube. However, The Smooth Rubber Ball Can Only Remove The Lighter Deposition In The Condenser Tube And The Microorganisms In The Tube. Power Plants With Good Water Quality Are Generally Used.2. Standard Peeling Rubber BallThe Standard Peeling Rubber Ball Is Especially Suitable For Various Condenser Copper Tubes. The Standard Peeling Rubber Ball Is Also A Kind Of Rubber Ball Commonly Used In Power Plants. The Rubber Ball Is Made Of Natural Rubber, Foaming And Special Additives. The Standard Peeling Rubber Ball Can Be Used For Various Rubber Ball Cleaning Equipment And Water Quality.Peeling Rubber Ball Can Effectively Remove Biological Dirt And High Viscosity Biological Dirt. Suitable For Stainless Steel Tube And Titanium Alloy Tube Heat Exchanger.3. Carborundum Rubber BallThe Carborundum Rubber Ball Is Divided Into Full Carborundum Rubber Ball And Semi Carborundum Rubber Ball. The Carborundum Rubber Ball Is Suitable For Removing All Kinds Of Pipes With More Scales And Deposits, But It Is Harmful To The Pipes. Generally, It Is Not Used For A Long Time, Especially For Copper Pipes.Effectively Remove Hard Scaling, Such As Calcium Carbonate. Suitable For Steel Pipe And Stainless Steel Pipe Heat Exchanger.The Carborundum Rubber Ball Cannot Be Used Continuously In The Water For A Long Time. It Is Recommended To Take It Out And Dry It In A Ventilated Place (do Not Expose It To The Sun) After Using It Once. It Should Be Cool For 3-5 Days. If It Is Used Repeatedly, The Service Life Of The Carborundum Rubber Ball Will Be Longer.4. Silicified SphereThe Diameter Of The Rubber Ball Is Slightly Smaller Than The Inner Diameter Of The Cooling Pipe (about 1-2mm). The Rubber Ball Bounces In The Cooling Pipe By The Water Flow And Its Own Elasticity, And The Dirt Adsorbed On The Inner Wall Of The Cooling Pipe Is Removed In The Process Of Bouncing Flushing.Usage Of Rubber Ball·Normal PitchIt Refers To 7% - 13% Of The Number Of Single Side And Single Flow Cooling Tubes Of The Condenser. The Lower Limit Or Upper Limit Or Its Approximate Value Shall Be Taken According To The Length Of Time Required For A Rubber Ball Cycle. The Time Limit For A Rubber Ball Cycle Is Generally 30 Seconds.·replenishment Cycle Or Replacement Cycle Of Rubber BallThe Replenishment Cycle Of The Rubber Ball Is The Accumulated Operation Of The Rubber Ball Cleaning System For 7 Times. The Replenishment Cycle Can Also Be Adjusted According To The Specific Situation Of The Unit.The Replacement Cycle Of The Rubber Ball: According To The Statistics Of The Use Of Domestic Balls, The Replacement Cycle Is 60 Times Of Cumulative Operation Of The Rubber Ball Cleaning System.In Addition, After Soaking In Water For A Period Of Time, Some Rubber Balls May Swell Too Much, Causing The Diameter To Exceed The Standard. When Replenishing And Replacing Rubber Balls, They Should Be Replaced In Time To Prevent The Cooling Pipe From Being Blocked.Company Profile Supplying Standard and Customized Rubber & Plastic PartsEstablished in 2004, Jinyuan Rubber is specialized in providing quality customized rubber molding,extrusion parts, plastic injection products and some standard parts.Meeting Various StandardsWe have a fully-equipped workshop that meets ISO 9001:2015 and IATF 16949:2016 requirements.Our products are compliant with FDA, WRAS, UL, RoHS and REACH standards, and meet DIN, JIS, BS and ASTM regulations.Parts include, but are not limited to:Grommet, sleeve, feet, gasket, wheel, bellow, cap, dust cover, pad, washer, Strip, plug, stopper, grip,seal, bushing, bumper, blocks, and anti vibration mounts etc.Packaging & Shipping FAQ1. What types of rubber do you use?Jinyuan Rubber has extensive experience in a vast range of rubber, including: Natural Rubber, SBR, CR, NBR, HNBR,EPDM, Silicone Rubber, FPM, ACM, FK etc.2. What types of plastic do you use?Jinyuan Rubber has extensive experience in a vast range of plastics, including: ABS, Polypropylene (PP), PVC, POM,PE, PEEK, Polyamide (PA) Nylons, PBT, etc.3. What services do you provide?We offer a broad range of services, including, Custom Rubber Molding, Liquid Injection Molding, Rubber Extrusion, andRubber/Plastic to Metal Bonded Parts.4. Why us?4.1 More than 15 years professional manufacture experience.4.2 Professional R&D team, production team, sales team, after-sales service team.4.3 Superior performance with most competitive price.4.4 Faster delivery time.5. Perfect quality control process5.1 Raw material inspection All raw materials before warehousing must be tested, and the corresponding physical property report shall be issued,and compared with the physical property report of raw materials. Only when the test values of the two physical propertyreports are consistent, can they be warehoused.5.2 Mold inspection After mold development or cleaning, we will check the full size of the mold to ensure that the quality of each cavity isthe same.5.3 Product inspection In the process of product production, inspectors regularly inspect the semi-finished products to ensure the rationalityof the process and control the defective rate within a reasonable range.5.4 Finished product inspection The double inspection can ensure that the product appearance and size are 100% qualified.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.