Silver Conductive Slurry for Flexible Circuit Electronic Component Use¹

Product Description Product Description Product Parameters Quantity: Choose from a range to suit your needs: 100 - 499 grams at just $0.675 per gram, 500 - 999 grams priced attractively at $0.64 per gram, or maximize value with 1000 grams or more at only $0.61 per gram.ModelLX-LMP4101Solid content%53±1.0Viscosity (dPa.s)130±50Finenessμm≤9Square resistance(mΩ/sq/mil)≤10Curing conditions1stTunnel furnace: 135*6 min2ndOven: 135*40 minProcess recommendationScreen printing, polyester mesh or stainless steel mesh (250 mesh)  Packaging & Shipping Shipping solutions for the selected quantity are temporarily unavailable, and we are working diligently to resolve this issue. Rest assured, your convenience is our priority, and an update will be provided as soon as possible.Our Advantages Protections for this product include secure payments and easy return & refund. Every transaction on is fortified with stringent SSL encryption and PCI DSS data protection standards. Should your order be missing or present any issues, you can claim a hassle-free refund, and we offer free local returns for defects on eligible items.Company Profile Foshan Longxin New Material Co., Ltd.  FAQ Q: How many days is the price valid for?A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.Q: How should the conductive paste be stored?A: a. Short-term storage. Seal and place at room temperature within 3-5 days.b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.d. Regardless any type of slurry, remember to seal it during storage.Q: What are the precautions before using conductive paste?A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.Q: What should be paid attention to when using the conductive paste?A: a. Make sure the paste is consistent with the ambient temperature.b. Stir it thoroughly before use to restore the performance of the paste.Q: Do we need to add diluent when using conductive paste?A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.c. Please use special diluents and do not mix them to cause performance changes.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.