CIPDB › China Industry › Metallurgy, Mineral & Energy › Black Metal & Products
API 5L X42/X52/X65 ERW Hfw Welded Carbon Steel Pipe for Oil & Gas1
Black Metal ProductsX42/X52/X65 Carbon Steel TubesSchedule 40 Carbon Steel Pipe
EZ Steel Industrial Co., Ltd.
Preview:
Product Description Product Description CategoryX42X52X65Shared SpecificationsStandardAPI 5L PSL1/PSL2API 5L PSL1/PSL2API 5L PSL1/PSL2Complies with ISO 3183, ASTM A53Yield Strength≥290 MPa (42,000 psi)≥360 MPa (52,000 psi)≥450 MPa (65,000 psi)Tested per ASTM A370Tensile Strength≥415 MPa (60,200 psi)≥460 MPa (66,700 psi)≥535 MPa (77,600 psi)PSL2 requires stricter testingChemical CompositionC ≤0.28%, Mn ≤1.25%,S ≤0.03%, P ≤0.03%C ≤0.28%, Mn ≤1.35%,S ≤0.03%, P ≤0.03%C ≤0.16%, Mn ≤1.60%,S ≤0.03%, P ≤0.03%Low sulfur/phosphorus for weldabilityManufacturing ProcessHFW (High-Frequency Welding) or ERW (Electric Resistance Welding) Seam welded, heat-treated (normalized or quenched)Wall ThicknessSCH 40, 80, 160, XXSSCH 40, 80, 160, XXSSCH 40, 80, 160, XXSSizes: 1/2" to 24" ODApplicationsLow-pressure oil/gas transmission, water linesMedium-pressure pipelines, structural pilingHigh-pressure pipelines, offshore drillingOil & gas, petrochemical, constructionCertificationsAPI 5L Monogram, ISO 9001, NACE MR0175 (optional) PED 2014/68/EU for EU marketsTesting RequirementsHydrostatic test, flattening test, ultrasonic testing (PSL2) Charpy V-notch test (PSL2 only)Surface CoatingBare, black varnish, or FBE (Fusion-Bonded Epoxy) Optional 3LPE/3LPP coating 1. Product OverviewAPI 5L X42/X52/X65 HFW ERW welded carbon steel pipes are widely used in the oil and gas industry for pipeline transportation. API 5L (American Petroleum Institute Specification 5L) is the standard that these pipes adhere to, which ensures their quality and suitability for specific applications. HFW (High - Frequency Welding) and ERW (Electric Resistance Welding) are the manufacturing processes used to form these pipes, creating a longitudinal weld seam.1.1 Standard SpecificationsAPI 5L: This standard defines the requirements for the manufacture, testing, and marking of line pipe for use in pipeline transportation systems. For API 5L X42/X52/X65 pipes, it specifies the minimum yield strength, tensile strength, and other mechanical properties. The "X" followed by a number represents the minimum yield strength of the pipe material in kilopounds per square inch (ksi). For example, X42 has a minimum yield strength of 42 ksi (290 MPa), X52 has 52 ksi (359 MPa), and X65 has 65 ksi (448 MPa).Manufacturing Process Standards: The HFW ERW process is carried out in accordance with strict industry standards. The welding process must ensure a high - quality, leak - tight weld seam. The electrical resistance heating in ERW and the high - frequency induction in HFW are precisely controlled to achieve proper fusion of the steel edges, resulting in a strong and reliable weld.2. Material Properties2.1 Chemical CompositionCarbon (C): The carbon content in these pipes is carefully controlled. For API 5L X42/X52/X65 pipes, the carbon content typically ranges from 0.15% to 0.25%. A relatively low carbon content helps in achieving good formability during the pipe - making process and also contributes to the weldability of the steel. High carbon content can lead to reduced weld quality and increased brittleness.Manganese (Mn): Manganese is added to improve the strength and hardenability of the steel. In API 5L pipes, the manganese content usually ranges from 1.0% to 1.6%. Manganese also helps in deoxidizing the steel during the manufacturing process, reducing the presence of harmful oxygen - related inclusions.Silicon (Si): Silicon is present in small amounts, typically around 0.10% to 0.40%. It aids in the deoxidation process and can also enhance the strength and hardness of the steel to a certain extent. Silicon can improve the pipe's resistance to oxidation at elevated temperatures, which is beneficial in some pipeline applications.Phosphorus (P) and Sulfur (S): These are considered impurities in the steel. API 5L sets strict limits on the phosphorus and sulfur content. Usually, the phosphorus content is less than 0.035%, and the sulfur content is less than 0.030%. High levels of phosphorus and sulfur can reduce the ductility and toughness of the steel, and sulfur can also cause hot - shortness during the manufacturing process, leading to potential defects in the pipe.2.2 Mechanical PropertiesYield Strength: As mentioned, the minimum yield strengths for X42, X52, and X65 pipes are 42 ksi (290 MPa), 52 ksi (359 MPa), and 65 ksi (448 MPa) respectively. The yield strength is crucial as it determines the stress level at which the pipe starts to deform plastically. In pipeline applications, the pipe needs to withstand the internal pressure of the transported fluids, and a sufficient yield strength ensures that the pipe can resist this pressure without permanent deformation.Tensile Strength: The tensile strength of API 5L X42 pipes is typically in the range of 58 - 75 ksi (400 - 517 MPa), for X52 it is around 66 - 85 ksi (455 - 586 MPa), and for X65 it is 76 - 95 ksi (524 - 655 MPa). A high tensile strength allows the pipe to withstand external mechanical loads, such as those from soil movement or construction activities, without breaking.Elongation: These pipes generally have an elongation of around 20% - 30%. Good elongation properties mean that the pipe can deform to a certain extent before fracturing. This is important in case of any ground settlement or minor seismic activities, as the pipe can adapt to some degree of movement without rupturing.Toughness: API 5L X42/X52/X65 pipes are required to have sufficient toughness, especially in cold - climate regions. Toughness is measured by impact tests, such as the Charpy V - notch test. Adequate toughness ensures that the pipe can resist brittle fracture, which could be catastrophic in pipeline systems.3. Manufacturing Process3.1 Plate PreparationThe manufacturing process starts with the selection of high - quality carbon - steel plates. These plates are first inspected for any surface defects, such as cracks, inclusions, or uneven thickness. The plates are then cut to the appropriate width and length according to the desired pipe diameter and length.The edges of the plates are prepared for welding. This often involves a process called edge - milling, where the edges are machined to a specific shape and smoothness. The proper edge preparation is crucial for achieving a high - quality weld during the subsequent welding process.3.2 Welding Process (HFW ERW)Electric Resistance Welding (ERW): In the ERW process, the prepared steel plates are formed into a cylindrical shape. An electric current is passed through the edges of the plate, which generates heat due to the electrical resistance of the steel. This heat causes the edges to melt and fuse together, forming a continuous weld seam. The welding parameters, such as the current, voltage, and welding speed, are carefully controlled to ensure proper fusion and a high - quality weld.High - Frequency Welding (HFW): HFW is a variation of ERW. In HFW, a high - frequency alternating current is applied to the edges of the steel plates. The high - frequency current causes rapid heating of the edges, leading to their fusion. The advantage of HFW is that it can achieve higher welding speeds compared to traditional ERW, which increases production efficiency. However, it also requires more precise control of the welding parameters to ensure consistent weld quality.3.3 Post - Weld TreatmentAfter welding, the pipes usually undergo a series of post - weld treatments. One of the common treatments is stress relieving. The welded pipes are heated to a specific temperature (usually around 550 - 650°C) and then slowly cooled. This process helps to relieve the internal stresses generated during the welding process. High internal stresses can lead to cracking or distortion of the pipe over time, especially under the influence of the internal pressure and external loads in pipeline service.The pipes may also be subjected to non - destructive testing (NDT) at this stage. Ultrasonic testing is used to detect internal flaws in the weld seam, such as cracks, voids, or incomplete fusion. Magnetic particle testing or dye penetrant testing can be used to detect surface - opening defects in the weld area.3.4 Sizing and FinishingOnce the post - weld treatment and NDT are completed, the pipes are sized to the exact dimensions specified in the API 5L standard. This may involve processes such as cold - sizing or hot - sizing, depending on the requirements. Cold - sizing is often used to achieve high - precision dimensional accuracy.The pipes are then given a final finish. This may include surface cleaning to remove any scale, rust, or contaminants. Some pipes may also be coated with anti - corrosion coatings, such as polyethylene or epoxy coatings, to protect the pipe from corrosion in the harsh environments where they will be installed.4. Applications4.1 Onshore Oil and Gas PipelinesX42: API 5L X42 pipes are often used in less - demanding onshore applications, such as gathering lines in oil and gas fields where the pressure and corrosive environment are relatively mild. They can be used to transport crude oil, natural gas, or associated fluids from wellheads to processing facilities.X52: X52 pipes are more commonly used in onshore transmission pipelines. They can withstand higher pressures and are suitable for transporting natural gas over longer distances from production areas to distribution centers. Their mechanical properties make them reliable for withstanding the internal pressure of the gas and the external loads from soil and other factors.X65: X65 pipes are typically used in high - pressure onshore pipelines. They are suitable for transporting large volumes of natural gas or other fluids under high - pressure conditions. In some cases, they may also be used in pipelines that transport more corrosive fluids, as their relatively high strength can better resist the effects of corrosion - induced wall thinning.4.2 Offshore Oil and Gas PipelinesX52 and X65: In offshore applications, where the operating conditions are more severe, X52 and X65 pipes are widely used. Offshore pipelines need to withstand high internal pressures, the weight of the overlying seawater, and potential mechanical damage from marine activities. The higher strength of X52 and X65 pipes makes them suitable for these challenging conditions. They are used in subsea pipelines that transport oil and gas from offshore platforms to onshore facilities or between different offshore structures.4.3 Industrial PipelinesAPI 5L X42/X52/X65 pipes are also used in industrial settings. For example, in petrochemical plants, they can be used to transport various chemicals, such as hydrocarbons, acids, and alkalis. The pipes' corrosion resistance, due to their chemical composition and potential coatings, makes them suitable for handling these industrial fluids. In power plants, they may be used in pipelines that transport water, steam, or other working fluids. Material Steel GradePSL1:A/L210,B/L245,X42/L290,X46/L320,X52/L360,X56/L390,X60/L415,X65/L450,X70/L485PSL2: L245N/Q,L290R/N/Q,L320N/Q,L360N/Q,L390N/Q,L415N/Q,L450N/Q,L485N/Q S235, S275, S355, C250, C350, etc. Manufacturing StandardsAPI 5L PSL1, API5L PSL2, ISO 3183, GB/T9711,EN10219,ASTM A53, etc. Corrosion Protection and PackagingPainting, internal and external anti-corrosion coating, steel banding, waterproof bag packing and so on, as required by customers. Main PurposeOil and gas pipeline, water pipe, agricultural irrigation, water well pipe, conventional fluid transportation, etc Detailed Photos Technical Details CertificationsFAQ
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...