Dt4a Dt4c Dt4e Pure Iron Pipes, Electromagnetic Electrical Pure Iron Pipes¹

Product Description Product DescriptionDt4a Dt4c Dt4e Pure Iron Pipes, Electrical Pure Iron Pipes, Electromagnetic Pure Iron Pipes DT4A/E/C Electrical Pure Iron (Electromagnetic Pure Iron) The main grades of DT4 pure iron include: DT4, DT4A, DT4E, and DT4C. It has excellent electromagnetic properties, such as low coercive force (Hc), high permeability (μ), high saturation magnetic induction (Bs), stable magnetism, and no magnetic aging. According to the level of magnetic properties, DT4 pure iron is classified as advanced (A), super (E), and ultra (C). For higher magnetic requirements, higher-grade materials (E and C grades) should be ordered. The electromagnetic properties of electrical pure iron, electromagnetic pure iron, and DT4 pure iron are measured under magnetic annealing conditions of the sample. However, the delivery is in the form of hot-rolled, hot-forged, or softening annealed state (cold-rolled and cold-drawn materials). Therefore, after users manufacture parts, annealing is necessary to fully exert the potential magnetism of the material. The magnetic annealing process of DT4 pure iron: If the carbon content of the finished product is ≤ 0.007%, a simplified process of 850°C for 3 hours can be adopted. When the carbon content is > 0.007%, the process stipulated in the national standard (GB) must be followed. Usually, DT4 pure iron for electrical and electromagnetic purposes is mainly used in electromagnetic cores, instruments and meters, electromagnetic components, electromagnetic clutches, electromagnetic locks, magnetic separators, and a series of electromagnetic products. The specifications include cold-drawn straight rods of pure iron (Φ6.5 - Φ18mm), cold-drawn round bars of pure iron (Φ20 - Φ35 mm), round bars of pure iron (Φ20 - Φ350 mm), cold-rolled thin sheets and coils of pure iron (≠0.5 - 5.0mm), medium and thick plates of pure iron (≠6.0 - 180mm), and various machined parts. Welcome customers from all walks of life to consult. ItemDetailsCommon GradesDT3, DT4, DT4A, DT4E, DT4C, YT01, YT0, YT2, etc.Main ComponentsPredominantly iron (Fe) with low impurity contentPerformance CharacteristicsGood electromagnetic properties, low coercive force, high permeability, high saturation magnetic induction, stable magnetism, and no magnetic agingUsesElectromagnetic cores, instruments and meters, electromagnetic components, electromagnetic clutches, electromagnetic locks, magnetic separators, alloy smelting, casting, powder metallurgy, etc.Specifications and FormsPure iron round bars, pure iron wires, cold-drawn pure iron round bars, pure iron medium plates, pure iron thin plates, slit pure iron thin plates, pure iron seamless pipes, pure iron profiles, etc.Processing TechniquesHot rolling, hot forging, softening annealing, cold rolling, cold drawing, etc.Magnetic AnnealingDifferent processes for different carbon contents in the finished product. If the carbon content is ≤ 0.007%, a simplified process of 850°C for 3 hours can be used; if the carbon content is > 0.007%, the process stipulated in the national standard (GB) must be followedDetailed PhotosHigh Iron Content Pure Iron | Ultra-Low Carbon Pure Iron - Unbeatable Quality for Your Industrial Needs!Pure IronArmco IronSoft IronElectrolytic IronHigh Iron Content Pure Iron | Ultra-Low Carbon Pure Iron Electrical pure iron (electromagnetic pure iron), also known as soft iron, has grades such as DT3, DT4, DT4A, DT4E, and DT4C, with low coercive force. The main specifications and types include cold-drawn straight rods of pure iron (Φ6.5 - Φ18mm), cold-drawn round bars of pure iron (Φ20 - Φ35 mm), round bars of pure iron (Φ20 - Φ350 mm), cold-rolled thin sheets and coils of pure iron (≠0.5 - 6.0mm), medium and thick plates of pure iron (≠6.0 - 220mm), and various machined parts. This type of pure iron is suitable for the electronics industry such as magnetizers, instruments and meters, switches, electromagnets, electromagnetic locks, motors, electromagnetic clutches, etc. Raw material pure iron (furnace charge pure iron) has grades such as YT2, YT0, and YT01, with excellent performance and pure material. The main specifications and types include round bars of pure iron (Φ20 - Φ100 mm), square bars of pure iron (30×30×220 - 250×250×6000mm, the length can be cut.), with a C content of less than 0.002, a P content of less than 0.005, and an S content of less than 0.004. We can provide pure iron blocks suitable for your smelting furnace size. For some customers' special requirements, additional services such as cutting and rust removal are also provided. This type of pure iron is suitable for the neodymium-iron-boron industry, stainless steel smelting industry, pure iron casting industry, pure iron alloy industry, etc. 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.