Silande Mf910h: Hotmelt Sealant for Insulating Glass - 6.5 Kg/Box 220 Kg/Drum¹

Product Description DESCRIPTIONSILANDE MF910H is a hot melt sealant formulated for single seal insulating glass. This product has been designed for insulating glass manufacurers running hand applied, semi-automated, and linear extruded operations.FEATURESOne component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for secondary sealing of insulating glass units.It can keep its plastic and sealing properties in a wide temperature range.Excellent adhesiopn properties on glass, aluminium alloy, galvanized steel and stainless steelImmediate high strength developement for superior handing and transportation capabilities.Excellent slump resistance, resulting in reduce after-application tooling.Low after-application tack for easy of handing.Minimum moisture vapour and gas permeation.Excellent temperature stability: -30oC to 80oC.SHELF LIFE AND STORANGE24 months stored in cool, dry and ventilated places.Excellent adhesion to a wide range of substrates including coated, enamelled and reflective glasses, anodised and polyester paint coated aluminium and stainless steel. Excellent temperature stability: - 60°C t 1ao0c. High level of mechanical properties. High elasticity and high modulus. Resistant to ozone. TEST ITEMSTEST RESULTSTESTS1ANDARDBasePolyisobutylene (PIB)-ColorBlack-AppearanceSolid massGB/T 1033.1Density1.1/1.25 fe/cm3]JC/T914Shear Strength0.21 MPa Penetration (1 /1 Omm)25°C 40 130°C 290JC/T 914Volatile ContentMax. 0.02 % FoggingWithout visual fogging-Moisture Vapour Transmission Rate (MVTR)0.26 [gr/m2.24hrs. 2mm]EN1279-4Gas Permeation Rate (Ar)1.30x10-3[gi7m2. hrs]EN1279-4.APPLICATION FIELDOne component, solvent free, non-fogging, permanently plastic butyl sealant, formulated for primary sealing of insulating glass units.It can keep its plastic and sealing properties in a wide temperature range.Excellent adhesion properties on glass, aluminum alloy, galvanized steel and stainless steel.Minimum moisture vapour and gas permeation.Excellent temperature stability: - 30°C to 80°C.PACKAGINGA: 265KG B: 19KG MF881R is a two-component, neutral room temperature curing silicone structural sealant. It has excellent flame retardancy, UV resistance and weather resistance. It can be used for the second sealing of hot mirror insulating glass.It can be used at 10oC~50oC, and it has good adhesion to glass, ceramics, metal, hot mirror film and other materialsNeutral fast curing, no corrosion to the adhered surfaceGood resistance to high and low temperature, keep good performance at -60oC~200oCExcellent flame retardancyNo pollution to the environmentExcellent weather resistance and UV aging resistanceAccording to standards: GB 16776, GB/T 2406, GB/T 2408Packing specification: MF881R heat mirror insulating glass special structural sealant A component and B component are provided in a 12:1 mass ratio.Big drum packaging: A component 200L iron drum                   B component 20L plastic bucketMedium drum packaging: A 20L plastic drum                   310ml plastic tube for component B Hot mirror hollow glass is composed of two layers of glass and a special hot mirror film, and is separated into a double cavity hollow structure by double-layer special spacers.Features:Heat insulation and high efficiency shielding of ultraviolet raysHigh light transmittance to prevent condensationEfficient sound insulation, energy saving and environmental protectionAPPLICABLE STANDARDS EU Specification: EN1279 - part1, 2, 4, 6China Specification: GB29755, JC/T471. IGCC-IGMA Approved.  SHELF LIFE AND STORAGE12 months from the date of production below 30°C. The well-packaged product can be stored for 12 months in a cool, ventilated, and dry place, and used before the "expiry date" of the outer packaging of the productPACKING6.5 kg/box220 kg/drum (φ571.5mm) 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.