High Temperature Resistance Zirconia Ceramic Foam Filter for Steel Casting¹

Product Description Monthly output of filters is 3 million pieces Over 20 years of ceramic foam filters' experience Physical/thermal properties tested and certified with SGSCompany quality system conform ISO9001:2015 Product DescriptionCeramic foam filters have revolutionized the metal casting industry, offering a highly effective and efficient solution for filtering molten metal. These filters are made from a unique ceramic material that offers exceptional porosity and strength, making them ideal for use in a wide range of metal casting applications.The primary function of a ceramic foam filter is to remove impurities and inclusions from molten metal before it is poured into a mold. These impurities, such as oxides, slag, and gas bubbles, can cause defects and porosity in the final casting, affecting its mechanical properties and durability. By filtering out these contaminants, ceramic foam filters ensure that the resulting casting is cleaner and stronger.    Silicon carbide ceramic foam filter (SIC ceramic foam filter)* Color: Dark Grey* PPI: 10ppi, 20ppi, 30ppi, 40ppi, 50ppi* Working Temperature: ≤1500oC* Thermal shock resistance(1100oC):≥2* Compressive strength:>0.9Mpa* Porosity: ≥80%* Sample: Support* Customization: Sizes and shapes* Application:Ductile Cast Iron, Malleable Cast Iron, Gray iron, and other Cast Iron.Alumina ceramic foam filter * Color: White * PPI: 10ppi, 20ppi, 30ppi,   40ppi, 50ppi * Working Temperature:≤1100oC * Thermal shock resistance(1100oC):≥2 * Compressive strength:>0.8Mpa * Porosity: ≥80% * Sample: Support * Customization: Sizes and shapes * Application:Aluminium Aluminium alloys and other Non-ferrous alloys.Zirconia ceramic foam filter * Color: Yellow* PPI:10ppi, 20ppi, 30ppi, 40ppi, 50ppi* Working Temperature:≤1700oC* Thermal shock resistance(1100oC):≥2* Compressive strength:>1.2Mpa* Porosity: ≥80%* Sample: Support* Customization: Sizes and shapes* Application:High melting point metal alloys like Steel, Alloy Steel, and Stainless Steel.Product ParametersDimensions mmFlow rate(kg/s)Total capacityCarbon steelHigh-alloy steelkg40×40×2022.53050×50×22345055×55×224560Φ50×222.5340Φ60×253.54.570Φ70×254.5695Φ75×2556.5110Φ80×2567.5125Φ90×2589.5160Φ100×259.512190Φ120×251114220Φ150×3012.515330Noted :1. Common sizes range: 40x40x20mm up to 150x150x30mm. 2. Round filters are available from D40x20mm up to D150x30mm. Although PPI 10 is the porosity most commonly used for steel casting, finer porosities up to PPI 40 are available on request. 3. Custom-made cut-to-size filters are also possible.4. If the foam filter is not used with our standard core seat design or exceeds the filter capacity, the use temperature may cause its failure.5. Try to avoid a direct metal fluid impact on the filter.When directly hitting the filter, the pouring height should not exceed 350mm.6. Prevent and avoid extrusion and collision of products during handling and transportation.7. The foam ceramic filter is made of stable chemical refractory and is usually non-toxic and harmless.Do not react with the metal liquid during pouring, and do not produce flue gas.There is also no harmful smoke during sand fall and sand regeneration. Product Feature1.High porosity2.Superior dimensional tolerances3.Low loss of thermal shock4.High mechanical strength at normal and high temperature5.Large specific surface6.Good chemical stability7.Excellent filtering functions of screen8.Excellent filtering residua collection and absorption9.Beveled edges and compressible gasketApplication FieldInstalled in pouring cupCommonly used in cast steel models to cover granular matterInstalled horizontally in vertical runnersIt is suitable for small molten steel parts , especially for casting systems where the vertical runner is located in the center of the mold and the horizontal runner is multi-branchedInstalled vertically in horizontal runnerImprove the flow rate of molten metal and enhance the filling capacity. Since the molten metal directly impacts the filter, the impact resistance of the filter should be considered.Installed horizontally in horizontal runnerImprove the flow rate of molten metal and enhance the filling capacity. Since the molten metal directly impacts the filter, the impact resistance of the filter should be considered.Company ProfileTaiyuanSIMIS Company was established in 2004 and has since expanded its business scope from Investment Casting to encompass the entire casting industry, including Sand Casting, Die Casting, and Forging Products. In 2023, the company ventured into Refractories and Ceramic Foam Filters products closely associated with the casting industry.CertificationsFAQ1.Are you a factory? What is the monthly production volume?We are a factory, specializing in the production of ceramic filters. The monthly output of filters is 3 million pieces. 2.How can I get quotation?Please kindly send us the sizes and quantity requied, we will quote our best price in 24 hours. For special         specifications, pl send the drawing. If you don't have the drawing, please kindly courier samples to us.   3. How can you get samples?We can supply free samples if we have them in stock. If we haven't produce in stock, we can produce it according to customer's requirement. Please take note that the courier fee should be payed at destination. 4..What's the lead-time for samples and batch orders?It is 7 working days for supplying samples.  It is 10-15 working days for batch orders. 5.Can I visit you? Sure. If you're sincere buyer and would like to visit our factory, please contact us to make an appointment. 6.How long is your production cycle?The production cycle will be determined according to the quantity of the order and the current production situation, usually the order production cycle is 15 days.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.