Lint Tacky Roller Dust Removal Silicon Sticky Roller for PCB SMT Machine Lamination¹

Product Description   Roller/Washable Silicon RollerConstructions:PDMS(Polydimethylsiloxane)RollerSiliconPipeAluminium and BearingsStandard WidthAll sizes are customized on drawingsRoller ColorGreenHandleAluminum alloyFrameAluminum alloyTackinessNone/Low/Middle/HighProtective filmPETApplicationsApplicable to breadboard, PCB, LCD, SMT, clean room, stainless steel sheet, film for dusting and etc.General Physical PropertiesRoller Diameter/mm22Hardness(shore A)25-30degreeTear Strength(KM/M)19.08Tensile Strength (MPa)5.3Elongation at Break(%)611Impact elasticity(%)43Volume resistance1012-1513(non-esd)Thickness of Protective film/μm40±5Performance TestingRotationFlexible, no abnormal soundCrumbs TestNo drop litter when roll over 60,000 timesHardness Testing25-30Packing1pcs/opp shielding bagFeatures* Its surface is smooth like mirror, can pick up particulates' size below 2um.* It is effectual in adhering to hair, scurf, dust or other impurities.* It is easy to transfer impurities to sticky paper, so that prolong the self-adhesiveness of silicon.* Reusable and washableInstructions for using silicone roller:1. Correct usage: when using silicone roller, please roll backward. (especially clean uneven products, such as PCB board) In this way, the service life of silicone adhesive can be prolonged, and the support can not be easily deformed and the screws can be prevented from loosening.2. Cleaning silicone sticky roller: please clean the silicone sticky roller with clean water or soapy water, wipe it dry or airdry it naturally.3. Do not contact benzene and ester solvents (such as Tianna water, net washing water, phenanthrene water, etc.) during use. Once in contact, wipe it quickly with anhydrous alcohol and dry it with an air gun.4. After every 5000 times of use, if the viscosity drops significantly, clean it with clean water, wrap it with clean packaging film, and place it for 48 hours, the viscosity also rises.5. The service life of our silicone sticky roller is more than 10000 timesPrecautions for silicone roller:1. It is strictly prohibited to use benzene and ester solvents (such as Tianna water, net washing water, phenanthrene water,etc.) to clean the silicone adhesive. Such solvents will cause the silicone adhesive to expand, age, deform, and reduce the viscosity quickly.2. Please do not use silicone rubber wheels to clean the ground, wall and rough board surface: it is easyto scratch the silicone sticky roller.3. Please do not scratch the silicone with a sharp blade.Maintenance and storage of silicone sticky roller:After use: please use the silicone sticky roller to roll back and forth on the sticky paper book several times to keep thesilicone sticky roller clean.Storage: please keep away from benzene solvents, inks and curing agents and put them in clean packaging.When not in use: please avoid high temperature environment and direct sunlight.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.