Fully Automatic BRC Welded Roll Mesh Welding Machine Brand New Condition¹

Product Description  Product Description3.0-6.0mm Brc Welded Wire Mesh MachineThis BRC welded wire mesh machine is mainy used to produce BRC roll mesh or BRC mesh panels,rather popular in the markets.Detailed Photos           Line Wire Straightening Device                                                     Line Wire Threading Mouth                                                     Pulling Mesh Car                                    Electric Hopper                                      Automatic Rolling Mesh Device                                             Wire Pay-offProduct Parameters     Item WZ-1200AWZ-1600AWZ-2400BWZ-2500ANumber of Electrodes24322448Max.Mesh Width1200mm1600mm2400mm2500mmWire Diameter2.5-6.0mm2.5-6.0mm3.0-6.0mm3.0-6.0mmCross Wire Space50-250mm50-250mm100-250mm50-250mmLine Wire Space50-250mm50-250mm100-250mm50-250mmFinished Products WayRoll Mesh/Both Roll Mesh and Plate MeshPulling Mesh WayServo MotorElectric Capacity125KVA*3125KVA*4125KVA*4125KVA*6Welding Speed50-80t/min50-80t/min50-80t/min50-80t/minControl SystemPLC & Touch ScreenSimilar MachineFully Automatic Reinforcing Mesh Welding Machine This Machine is mainly used to produce steel wire diameter 5.0-12.0mm,material round steel wires and ribbed steel wires,mesh size:100*100-300*300mm reinforcing mesh panels.Item WZ-2000AWZ-2500AWZ-3000AWZ-3300ANumber of Electrodes20243032Max.Mesh Width2500mm2500mm3000mm3300mmWire Diameter5.0-12.0mm5.0-12.0mm5.0-12.0mm5.0-12.0mmMesh Length3-12m3-12m3-12m3-12mCross Wire Space100-300mm100-300mm100-300mm100-300mmLine Wire Space100-300mm100-300mm100-300mm100-300mmElectric Capacity200KVA*10200KVA*12200KVA*15200KVA*16Welding Speed40-60t/min40-60t/min40-60t/min40-60t/minControl SystemPLC control and Touch ScreenPopular Fence Mesh Welding Machine1. Our fence mesh welding machine cent-control and welding time are composed of PLC program system . The input front-panel has two forms, touch screen and keyboard that makes the machine more intelligent and reasonable and it could press at one time, times welding .2. Per-cut line wires are fed by hand.Per-cut cross wires auto feeding with the high production rate,which keep the mesh surface is very flat. The hopper adopts the step motor control ,brake motor wheels and the cross wire will fall automatically from the hopper.3. Our transformers adopts big power at 125KVA every one,which can ensure the welding quality in good condition and adopt water cooling system. Our clients are very satisfied with our new development.4. The greatest advantage is that  you can adjust the distance of cross wire at random on the  same one piece wire mesh sheet very easily, and only need to set the any space required on the touch screen.5. Pulling mesh way adapts step motor according to the setting parameters into the touch screen,ensures the precision of pulling mesh.ItemWZ-2000AWZ-2500AWZ-3000ANumber of Electrodes404860Max.Mesh Width2100mm2500mm3000mmWelding Wire Diameter3.0-6.0mm/5.0-8.0mm3.0-6.0mm/5.0-8.0mm3.0-6.0mm/5.0-8.0mmMesh Length500-3000mm500-3000mm500-3000mmCross Wire Space50-250mm50-250mm50-250mmLine Wire Space50-250mm50-250mm50-250mmElectric Capacity125KVA*5125KVA*6125KVA*8Welding Speed50-70t/min50-70t/min50-70t/minControl SystemPLC control and Touch ScreenFully Automatic Steel Wire Mesh Panel Welding Machine1. Our this mesh welding machine,the line wire feeding from coil automatically,which is more convenient and save labor,the total production line will need two workers ok;2. The welding transformers is our new model and installed with water cooling system,which prolong the service life,and this water is not wasted, can be recycled all the time;3. Our welding pressure adopts mechanical spring,easy to adjust,which save the cost and maintenance cost is lower than other pneumatic model;4. The cross wires are fed from pre-cut,which adopts step motor driven from the special hopper one by one;5. Every welding transformer is controlled by single microcomputer control ,cent-control welding one time pressure ,which is more intelligentialized.The controller will connect with the  touch screen , and we can set the welding current and welding time on the touch screen ,which is very convenient,this machine will save energy greatly,in the theory,the production line will need only 12 degree electricity;Item WZ-1000AWZ-1500AWZ-2000AWZ-2500ANumber of Electrodes10152024Max.Mesh Width1000mm1500mm2000mm2500mmWire Diameter2.5-6.0mm2.5-6.0mm3.0-6.0mm3.0-6.0mmCross Wire Space50-250mm50-200mm50-200mm50-250mmLine Wire Space100-250mm100-250mm100-250mm100-250mmFinished Products Way Plate MeshPulling Mesh WayServo MotorElectric Capacity125KVA*2125KVA*2125KVA*3125KVA*4Welding Speed50-80t/min50-80t/min50-80t/min50-80t/minControl SystemPLC and Touch ScreenCertificationsPackaging & ShippingCompany ProfileAnping Wanzhong Wire Mesh Products Company entered the wire mesh industry in 2006, specializing in the manufacturing of various types of Fence Mesh Welding Machines, Reinforced Mesh Welding Machines, Automatic Construction Mesh Welding Machines, Breeding Mesh Welding Machines, Chain Link Fence Machines,Cattle Fence Machine, Nail Making Machines, Wire Drawing Machines, Barbed Wire Machines, Razor Barbed Wire Machines,Wire Straightening and Cutting Machine,etc.Wanzhong Company has its own professional R&D team,customized design and production can be carried out according to the special requirements of customers,and has already won fifteen national patents until January 31,2022. It has successfully passed ISO9001-2008,CE certification and SGS certification,and it is recognized as a national high-tech enterprise by our government,and our company credit rating is "AAA".Our machines have already exported to more than 40 countries, including USA,Russia,Algeria,Malaysia,the United Arab Emirates, Kuwait, Yemen, Oman, India, Uzbekistan, Kazakhstan, Iraq, Mexico, Tunisia, Kenya, Tanzania and Egypt.Wanzhong Company has its own professional and experienced after-sales service team, 365 days 24 hours to provide you with the most professional and intimate installation, guidance and maintenance services.After Sales ServiceSpecial technical engineers supply urgent technical support and consulting,at the same time,we assign one technical engineer to install and debug the machine according to our clients, then our clients will assume visa,round-trip tickets,eating,accommodation costs and ensure they the personal health and property safety, and pay 120 salaries per day.           Guarantee: Two years. Within two years after the date when the goods reach the destination port if the parts (not including easily damaged parts ) are broken for reasons which are not human, the seller will change the same with a new one free of cost. but the buyer will pay for postage.Equipment Program part life-long maintenance.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.