CIPDB › China Industry › Metallurgy, Mineral & Energy › Other Minerals
Tower Internals DN500 DN600mm Ceramic Slot Distributor Disc Slot Liquid Distributor Ceramic for Transfer Equipment1
Other MineralsCeramic DistributorGas Distributor
Pingxiang Bestn Chemical Packing Co., Ltd.
Preview:
Product Description Product DescriptionCeramic liquid distributor has a rough and uneven appearance, with many pore sizes ranging from 6 to 10 millimeters. The product is bowl shaped, with ventilation holes spaced in the middle of the distributor and convection holes spaced around the ventilation holes. An overflow port is set at the upper end of the convection holes, and a flow blocking groove is set on the lower end face of the distributor at the peripheral position of the convection holes. The height of the overflow port shall not exceed one-third of the height of the convection hole. When the liquid flow rate is high, in order to ensure uniform distribution of gas-liquid convection in the convection hole andmaintain a certain height of liquid, an overflow port is set at the upper end of the convection hole to ensure that uniformdistribution of gas-liquid convection can always be maintained in the packed tower. When the liquid distributor is placedunevenly, a flow blocking groove is set on the lower end face of the distributor body around the convection hole to prevent liquid from flowing in the bottom surface of the distributor body.Product ParametersItemUnitIndexPhysical and chemicalpropertiesBulk densityg/cm32.3-2.6Absorptivity%≤0.5Bending strengthMpa≥58.8Compressive strengthMpa≥120Temperature resistanceoC1280Resistance to thermal shocksoC150oCAcid resistance%>99.8Alkali resistance%>88Chemical compositionAl2O3%10-35SiO2%60-85Fe2O3%<2.0K2O+Na2O%<3.9CaO+MgO%<1.5Size: Φ300,Φ400,Φ500,Φ600,Φ700,Φ800,Φ900,Φ1500mm.Application/UsageThe function of the ceramic distributor is to uniformly distribute or redistribute the liquid at the top or a certain height of the packing, in order to improve the effective surface of mass and heat transfer, improve inter phase contact, and thus enhance the efficiency of the tower.Ceramic liquid distributors are widely used in gas-liquid mass transfer equipment such as gas absorption, gas-liquid reactions, and biochemical aeration. Under a certain pressure, the gas diffuses into small bubbles through the gas distributor and enters the liquid for mixing and mass transferCompany Profile
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.