CIPDB › China Industry › Metallurgy, Mineral & Energy › Non-ferrous Metal & Products
Factory Supply Tinplate Steel Coil T2 T3 T4 Manufacturer Electrolytic Tin Free Steel Price th550 Thickness 0.13mm Tin Plate Sheet1
Non-ferrous Metal ProductsT3 Tinplatetin plate steel
Tianjin Highsen Packaging Co., Ltd.
Preview:
Product Description PRODUCTSSpecificationThickness0.14 - 0.50mm Width600 - 1050mmLengthAs per customer requirementSteel TypeMR, SPCCAnnealingBA (Batch Annealed), CA (Continuously Annealed)StandardEN10202, JIS G3303, ASTM A623/ A624/ A625/ A626TemperT1, T2, T2.5, T3, T3.5, T4, T5, DR7, DR8, DR8M, DR9, DR9M, DR10Coating for ETPEqually coated (1.1/1.1, 2.0/2.0/ 2.8/2.8/ 5.6/5.6, 8.4/8.4, 11.2/ 11.2)Differentially coated (2.0/1.1, 2.8/1.1, 5.6/1.1, 5.6/2.8, 8.4/2.8, 8.4/5.6, 11.2/2.8, 11.2/5.6, 11.2/8.4, 15.1/5.6)Coating for TFSMetal Chromium Layer: 50-150mg/m2, Chromium Oxide Layer: 5-35 mg/m2Delivery time20-45 daysSupply Capacity8,000MT per month ShapeCoil, SheetCoil ID420mm or 508mmCoil Weight3-8MT or 6-12MTBundle Weight2MT MaxSurfaceBright, Stone, Fine Stone, Sliver, MattPost treatmentPassivation, Dos OilProcessing serviceCut to sheet, scroll cut, lacquer and print serviceApplicationA. Food Cans (Beverage Cans, Milk Cans, Fruit Cans, Tomato Cans, Edible oil etc. )B. Industrial Cans (Paint Cans, Chemical Cans, Lube containers)C. General Line Packaging (Aerosol Can, Gift Cans, Cookies Cans, Stationery Box etc.)MOQ25MT per sizeDelivery Tolerance+/-10%PackingStandard seaworthy export packing (horizontal or vertical) Products DisplayType of Steel MRIt contains few residual minor constituents and has good corrosion resistance.It is widely used for the applications of containers.LIt contains particularly few residual minor constituents as Cu, Ni, Cr, Mn.It is suitable for the materials of containers requiring improved corrosion resistance.DIt is an aluminum killed steel.It is suitable for the applications, that bear deep drawing or other workings which may produce Luder's lines patterns.Surface finishProduct finishSteel baseProductFlow-meltedSurface roughness RemarkRa (μm)BrightsmoothTinplateYes≤ 0.35Note 1: Double reduced product is only supplied as stone finish.Note 2: Sub-classfied based on the surface finishing of the blackplate.Note 3: The appearance is governed by:a) the surface characteristics of the steel base which principally result from controlled preparation of the work rolls used during the final stages of temper rolling;b) the mass of the coating applied; andc) whether the tin layer is flow-melted or unflow-melted.Fine stonefine stoneTinplateYes0.25 - 0.45StonestoneTinplateYes0.35 - 0.60Silvershot blastTinplateYes≥ 0.90Mattshot blastTinplateNoVariousFine stonefine stoneTFS/ ECCS-0.25 - 0.45StonestoneTFS/ ECCS-0.35 - 0.60 Products ApplicationTypical ApplicationRemarkTemper GradeTypical ApplicationJIS G3303ASTM A623MASTM A624MASTM A625MASTM A626MASTM A650MEN10202SingleReduced(SR)T-1T49TS230Drawn and ironed cans, nozzles, spouts, closures, mounting cup, oil filter.T-2T53TS245Ring and plugs, dome tops, closures, shallow drawn parts. Drawing can, body,end for large can.T-2.5T54TS260Battery shells, small can ends and bodiesT-3T57TS275Top and bottom of cans, can ends and bodies, large diameter closures, crown caps.T-3.5T59TS290General use, pail, 18L, 4LT-4T61TH415Can bodies and ends, crown caps, closures.Body and end for small can.T-5T65TH435Can ends and bodies requiring intensity.Body and end for small can.DoubleReduced(DR)DR-7MT71TH520DRD bodies, dome, Lug cap & 3 piece bodiesDR-8T72TH550DRD bodies, end, Lug cap & 3 piece bodiesDR-8MT73TH580DR-9T75TH620DRD bodies, Lug cap & 3 piece bodiesThinner guage body, end, DRD cans, caps.DR-9MT76-DR-10--DRD bodies, Lug cap & 3 piece bodiesThinner guage body, end, DRD cans, caps.Note: Making cans with DR materials, please pay a special attention to the rolling direction. Our Warehouse Production Equipment Production Details EXHIBITIONCoating Weight1) Tinplate (ETP)ItemFormer CoatingCoating Weight Nominal Coating WeightMinimum averageDesignationCode(g/m2)(g/m2)Equally Coated10#1.1/ 1.11.1/ 1.10.9/ 0.920#2.2/ 2.22.2/ 2.21.8/ 1.825#2.8/ 2.82.8/ 2.82.5/ 2.550#5.6/ 5.65.6/ 5.65.2/ 5.275#8.4/ 8.48.4/ 8.47.8/ 7.8100#11.2/ 11.211.2/ 11.210.1/ 10.1Differentially Coated25#/ 10#2.8/ 1.12.8/ 1.12.5/ 0.950#/ 10#5.6/ 1.15.6/ 1.15.2/ 0.950#/ 25#5.6/ 2.85.6/ 2.85.2/ 2.575#/ 25#8.4/ 2.88.4/ 2.87.8/ 2.575#/ 50#8.4/ 5.68.4/ 5.67.8/ 5.2100#/ 25#11.2/ 2.811.2/ 2.810.1/ 2.5100#/ 50#11.2/ 5.611.2/ 5.610.1/ 5.2100#/ 75#11.2/ 8.411.2/ 8.410.1/ 7.8125#/ 50#15.1/ 5.615.1/ 5.613.9/ 5.2Differential Markinga) Edge Marking : Low Coating Side with interrupted lines.b) Line Marking : Heavy Coating Side with continuous lines.c) Tin coating weight can be flexibly adjusted according to customer's requirement.*K-Tinplate's Resistance to CorrosionPickling Lag ValueIron Solution ValueTin Crystallite SizeAlloy-Tin Couple≤ 10 Sec≤ 20μg/3in2≤ 9#≤ 0.12μA/3in2) TFS (ECCS)ItemAverage Coating Weight (mg/m2)Metal Chromium Layer (Metal Cr)50 - 150Chromium Oxide Layer (Cr - Oxide) 5 - 35Note: Total chromium is the sum of metallic chromium and chromium content of the oxides and hydroxides. Production Flow PassivationItemChromium weight - MinChromium weight - Max(mg/m2) - Each Side(mg/m2) - Each SideCode 3113.59.0Code 3001.03.0Notes: 1) Passivation applys to Tinplate only, TFS no need passivation. 2) Code 311 is the most widely used passivation. 3) Code 300 is a simple chemical dip treatment.OilingItemOil WeightAim Oil Weight(mg/m2) - Each Side(mg/m2) - Each SideSlightly1.0 - 3.52.5Normal3.0 - 6.04.5Medium6.0 - 9.07.5Light Heavy7.0 - 11.08.5Heavy10.0 Min9.5Remarks: Tinplate and TFS are electro statically oiled with DOS (Di-Octyl-Sebacate). Package Specification Loading & ShippingFAQQ 1: What's your company's role in the supply chain?1) For supplying side, we organize production, arrange logistics and bank documents.2) For sourcing side, we help customer to match suitable mills, control quality and risks.Q 2: What's your company's advantages?1) Professional in tinmill products, such as tinplate, tin free steel, lacquered and printed tinplate.2) Responsible for risk control, quality control and cost control.3) Experienced in steel exporting, can arrange logistics and document properly.4) One step service for tinplate & TFS coil, sheet, lacquered and printed service.5) Quality report with details for individual order.6) Reasonable price and on-time delivery.Q 3: How can we trust your company?1) We specialized in tinmill products for years, you can ask professional questions to see we are in tinplate circle or not.2) We always expect customer to start from trial order to test our performace first.3) We accept independent third party inspection.4) We welcome customer to visit our office anytime.Q 4: What kind of payment terms do you accept?1) TT, 30% down payment and balance payment on invoice and packing list before loading.2) TT, 20% down payment, 30% on detailed packing list, balance payment on BL copy within three days.3) TT + LC, 20% down payment and LC opened within five days after down payment.4) LC at sight, or usance LC opened by first class banks.Q 5: When will be the delivery time after order confirmed?1) Cargo ready, usually 20-45 days depends on quantity after we received down payment or LC telex.2) Shipment usually will be 7-10 days after cargo ready (production finished).Q 6: What kind of shipment do you prefer?1) We can do both container and bulk shipment.2) Container shipment is faster but more expensive, bulk shipment is slower but cheaper.3) We will give professional suggestions depends on customer's situation.Please leave your enquiry in the message box at the bottom of the product page and click SEND, online salesman will contact you as soon as possible.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.