High Melting Point 97% Sic Black Silicon Carbide (200 Mesh SiO2 Powder)¹

Product DescriptionProduct OverviewSilicon Carbide Metallurgical grade Introduction Silicon carbide (SiC), as a high-performance material, has a wide range of applications in various fields.Silicon carbide is composed of two elements, silicon (Si) and carbon (C), covalently bonded together, with the chemical formula SiC. This compound material has properties between ceramics and metals, exhibiting a variety of excellent physical and chemical propertiesSilicon carbide (SiC) serves as a deoxidizer for steelmaking, reducing the liquid oxygen content in steel through the synergistic effect of silicon and carbon elements, replacing traditional metal deoxidizers such as ferrosilicon and manganese iron.Silicon carbide appearanceThe appearance of silicon carbide varies depending on its purity, and can appear as crystals ranging from yellow to green, or even blue to black. The surface of crystals sometimes presents a rainbow like luster due to the formation of a protective layer of silicon dioxide on the surface.Black Silicon Carbide (SiC) is a synthetic ceramic material with exceptional hardness (9.5 Mohs), high thermal conductivity, and chemical inertness. Widely used in  metallurgy, abrasives, refractories, and industrial coatings, our SiC products are smelted from high-purity petroleum coke and quartz sand under controlled conditions to ensure consistent quality.SpecificationChemical Data InformationGrain SizeSiC  Content%F.C. %Fe2O3 %Humidity %F12- F220≥ 98≤ 0.3≤ 0.5≤ 0.2F12- F90≥ 98.5≤ 0.2≤ 0.5≤ 0.2F100- F150≥ 98≤ 0.3≤ 0.6≤ 0.2F180- F220≥ 97≤ 0.3≤ 0.65≤ 0.2F230- F400≥ 96≤ 0.4≤ 0.65≤ 0.2F500- F800≥ 95≤ 0.4≤ 0.70≤ 0.2F1000- F1200≥ 93≤ 0.5≤ 0.80≤ 0.2P12- P90≥ 98.5≤ 0.2≤ 0.5≤ 0.2P100- P150≥ 98≤ 0.3≤ 0.5≤ 0.2P180- P220≥ 97≤ 0.3≤ 0.65≤ 0.2P230- P500≥ 96≤ 0.4≤ 0.65≤ 0.2P600- P1500≥ 95≤ 0.4≤ 0.70≤ 0.2P2000- P2500≥ 93≤ 0.5≤ 0.80≤ 0.2Physical DataMohs Hardness 9.5Melting Point2300°CService Temperature1900°CGravity Density 3.2-3.45 g/cm3Bulk Density1.2-1.6 g/cm3ColorBlack Crystal typeHexagonal Crystal FormModulus Strength58-65 × 106 psiCoefficient Thermal Expansion rate3.9-4.5 × 10-6 /°CThermal Conductivity 71-130 W/m· K Particle SizeFraction 0-1mm, 1-3mm, 3-5mm, 5-8mm FineF500, F2500, -100mesh, -200mesh,  -320meshGrains8#, 10#, 12#, 14#, 16#, 20# , 22#, 24#, 30#, 36#, 46#, 54#, 60#, 80#, 100#, 120#, 150#, 180#, 220#Micro Powder (Standard)W63, W50, W40, W28, W20, W14, W10, W7, W5, W 3.5, W 2.5JIS240#, 280#, 320#, 360#, 400#, 500#, 600#, 700#, 800#, 1000#, 1200#, 1500#, 2000#, 2500#, 3000#, 4000#, 6000#FEPAF230, F240, F280, F320, F360, F400, F500, F600, F800, F1000, F1200, F1500ApplicationsIndustry Recommended Usage Particle (1) Silicon carbide for refractoriesIn the process of production and processing of black silicon carbide, a large number of silicon carbide content below 90% is formed and produced, commonly known as low silicon.The main uses of low content black silicon carbide for refractory industry, steel industry deoxidizer, clay, castable, iron trench material.(2) Silicon carbide for deoxidation and casting in steelmakingSilicon carbide is a compound formed by covalent bond of carbon and silicon, which is a non-oxidizing material.Because of its significant instability in high temperature oxidation atmosphere, especially when the temperature exceeds 1627℃, the oxidation reaction is rapid.The use of this characteristic in the converter and electric furnace smelting general carbon steel and part of the low alloy steel process in order to achieve the purpose of reducing the cost of steelmaking, has achieved good results.Among them, the most commonly used quality is concentrated in 80%-95%, and the particle size is 0-10mm, 0-5mm, 1-3mm, 1-5mm (the most used in casting).(3)Silicon carbide grit sandOur company produces silicon carbide particle size sand, the specific product models are: F20, F24, F30, F36, F40, F46, F60, F80, F90, F100, F120, F180, F220, F240, P20, P24, P30, P36, P40, P46, P60, P80, P90, P100, P120, P180, P220, P240.(4)Silicon Carbide Micro PowderThe application range of silicon carbide powder is more and more wide, and the demand is further increasing.The silicon carbide powder produced by our company is mainly used in the manufacture of refractory products, foam ceramic industry, solar silicon panel cutting, crystal cutting and grinding, automobile engine parts manufacturing, special coating industry, plastic products modification, desulfurization, power supply, environmental protection industry, etc .  .Company ProfileXingshi Silicon carbide factoryXingshi Carbon company was established in June 2022 with a registered capital of 600 million yuan, located in Qingshui County, Tianshui City, Gansu Province, covering an area of 300000 square meters. The company has world-class production equipment, advanced production processes, fast and cost-effective logistics network transportation, complete testing methods, and a scientific management system, striving to build a leading integrated industrial base for composite ceramics and refractory materials in China.We are a high-tech enterprise specializing in the research and development, production, and sales of silicon carbide (SiC). Our products include black SiC, green SiC, and SiC powder, which are widely used in refractory materials, abrasives and grinding tools, metallurgical industry, ceramics, and other fields.  Third Party Inspection: SGS before loadingWhy Choose Us- Xingshi Carbon"Details upon request—just ask!"For technical data sheets and pricing, reach out to our sales team!Features & AdvantagesThe advantages of using silicon carbide segment sand as a decarburization and deoxygenation agent are as follows:1. Increase carbon and silicon to reduce the cost of molten iron.2. Deoxidize and reduce slag, improving the service life of furnace lining.3. Deoxygenation and degassing, purifying molten iron.4. Deoxygenation reduces the consumption of spheroidizing agents for ball-milled cast iron.5. Increase the number of graphite balls and improve the spheroidization level.6. Add A-type graphite and reduce undercooled graphite.7. Extend the decay time and eliminate the phenomenon of white cast iron.8. Improve the uniformity of casting section hardness and prolong the service life of cast iron products.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.