CNC Tundish Upper Nozzle¹

Product Description CNC tundish upper nozzleProduct DescriptionThis product is suitable for continuous cast tundish open cast steel. The zirconium insert is made of high-purity zirconia, which is formed by high-pressure molding and sintering at high temperature. The outer is made of corundum and high-quality aluminum vanadium. It is formed by high pressure molding and baked at low temperature. The two are bonded with corundum mud, and the product's corrosion resistance and thermal shock stability have reached the domestic advanced level, which can fully meet the needs of various billet continuous casting. Tundish upper nozzle It is located within the tundish lining and conveys steel to the controlling exchangeable nozzle,which determines the steel flow. The stationary nozzle must be capable of withstanding long sequence times. Our Upper nozzle that incorporates a ultra-high densityLKZN-M or LKZN-H insert. The insert provides excellent erosion resistance and can provide extended casting sequence times. The lower surface of the stationary nozzle is ground to exacting tolerances to ensure maximum surface contact between the two nozzle components. Tundish lower nozzle It is located within an assembly that is fixed to the bottom of the tundish.The design of the exchangeable nozzle can vary according to the system manufacturer. We supplying a range of zirconia inserts and composite nozzle designs for the exchangeable metering of steel. Zirconia inserts can be supplied for on-site assembly into metallic holding blocks where cementing, grinding, size banding and on site drying are required prior to use. It was manufactured by both cast process of fine grained alumina method or presse process. TUNDISH NOZZLE used for the continuous casting of steel. Products used in Tundish can be offered to you as follow:Tundish metering nozzleNon swirling tundish nozzleTundish upper nozzleTundish lower nozzleTundish slide plateQuick-exchange tundish nozzleLadle shroudSubentry nozzle/ submerged entry nozzleMonoblock stopperMNC tundish metering Nozzle changerFeatures:Highest safety in open casting processIncresed yield of production with long sequence castingNozzle change or strand close less than one secondQuick start/stop of individual strandEasy handling and operation results in a safe system operantionCompact climenshionsAdvanced mechanical systemMechanical fixation of upper nozzleSliding drive arrangement-easy cylinder handling for nozzle changeClear view to the nozzle & moldGood access for nozzle tip cleaningSpring well protected in housing against splashes and dirtCNC TUNDISH NOZZLEThe CNC is the most user friendly and safe nozzle change device currently available for billet,bloom and beam casters.Features;Reduced tundish costs (refractory,manpower, energy)Increased casting yieldIncrease caster utilizationImproved operational safetyRefractory components:Upper nozzle plate designed to avoid exposure to steel splashesRefractory components available for open stream casting and alternative blank plate or double stroke.Upper nozzle(Stationary nozzle)It is located within the tundish lining and conveys steel to the controlling exchangeable nozzle,which determines the steel flow. The stationary nozzle must be capable of withstanding long sequence times.Our Upper nozzle that incorporates a ultra-high densityLKZN-M or LKZN-H insert.The insert provides excellent erosion resistance and can provide extended casting sequence times.The lower surface of thestationary nozzle is ground to exacting tolerances to ensure maximum surface contact between the two nozzle components.Lower Nozzle (EXCHANGABLE)It is located within an assembly that is fixed to the bottom of the tundish.The design of the exchangeable nozzle can vary accordingto the system manufacturer.We supplying a range of zirconia inserts and composite nozzle designs for the exchangeable metering of steel. Zirconia inserts can be supplied for on-site assembly into metallic holding blocks where cementing, grinding, size banding and on site drying are required prior to use.It was manufactured by both cast process of fine grained alumina method or presse process.Product Parameters Outer: Al2O3Al2O3  C  Apparent porosityBulk density  Compressive strength   (% minm)(% minm)(% max)(gm./cc minm)(MPa minm)75482.956080472.956094-152.9560Zirconia Insert of Tundish Upper NozzleZrO2+HFO2Apparent porosityBulk densityC.C.SRefractoriness(% minm)(% max)(gm./cc minm)(MPa minm)(oC minm)65233.60 80179070233.70 80179080233.90 80179084234.00 80179093214.50 100179094214.90 1001790Packaging & ShippingInternational standard seaworthy exportable packing.1. Wooden case (Seaworthy standard packing)2. Further packing information based on customer's requirements ApplicationThe tundish metering nozzle is mainly used for continuous casting of tundish billets, blooms, rectangular billets, and small slabs for pouring steel.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.