CIPDB › China Industry › Metallurgy, Mineral & Energy › Refractory Material
Aluminum Oxide Ceramic Al2O3 Tube1
Refractory MaterialWear Resistant Alumina Ceramic TubeCorundum Tube
Zibo Yunfeng Industrial Ceramics Co., Ltd.
Preview:
Product Description Qijing industrial ceramics are widely used in power, coal, metallurgy, chemical industry and other industries. As an abrasive material and corrosive medium. Alumina ceramic thermocouple protection tube .Thermocouple temperature measuring instrument is a commonly used temperature measuring element in industrial production. Among them, the key core parts are temperature measuring heating wire and insulating protective sleeve. Alumina ceramic insulating protective sleeve has good thermal conductivity and high temperature resistance. It is widely used in the production of thermocouples. It plays a key role in protecting the temperature measurement and thermal conductivity wires and increases the service life of thermocouples. The corundum protective sleeve has a sealed round head shape at one end and good compactness. It is generally used in conjunction with an insulating core to form an important temperature measuring element of a thermocoupleprotection tube. Our tubes can work as high temperature tubes.According to temperature difference we uaually provide 95% alumina tubes and 99.7% alumina tubes for this usageMAX working temperature: 95% alumina tube, 1550C;99.7% alumina tubes, 1700C. Two types: two ends open and one end closedStandard sizes:50/40mm x 1000mm60/50mm x 1000mm80/70mm x 1000mm90/80mm x 1000mm100/90mm x 1000mm.>>>Physical Property: Material Alumina ContentCharacteristicUnitAL99.7AL99.5AL99AL95Content 99.7%99.5%99%95%Color Ivory whiteIvory whiteIvory whiteIvory white, Densityg/cm3.943.93.83.75Straightness 2‰2‰2‰2‰HardnessMohs hardness9998.8Water absorption <=0.2<=0.2<=0.2<=0.2Flexural strength(20oC) Mpa375370340304Compressive strength(20oC) Mpa2300230022101910Thermal expansion coefficient10/oC7.67.67.67.6Dielectric strengthAC.kv/mn10101010Dielectric loss<0.0001<0.00010.00060.00040.001Volume resistivity (20oC) (300oC)Ω.cm3>10142*1012>10142*1012>10144*1011>10142*1011Dielectric constant25oC@1HM9.89.79.59.2Thermal conductivityW/m.k35353420Long-term use temperatureoC1700165016001400>>>SIze : OD*ID (mm)Model & lengthOD*ID (mm)Model & lengthOD*ID (mm)Model & length 2*1 Al2O3 99.5% <=1500 mm 10*7Al2O3 95% /Al2O3 99%/Al2O3 99.5%<=2500 mm19.05*14.3 Al2O3 95% /Al2O3 99%/Al2O3 99.5%<=2500 mm 3*211.13*7.9520*15 4*2.512*822.23*15.88 5*312.7*8.923.83*17.48 6.35*3.96 Al2O3 95% /Al2O3 99%/Al2O3 99.5%<=2500 mm14*1025.4*19.05 7.95*4.7815*1026*20 8*5.515*1128*22 9.53*6.3516*1230*23 10*617.48*12.7 Transport and installation precautions:Matters needing attention for transportation and installation of ceramic pipe1. The ceramic composite pipe has high hardness and good toughness, but it should be put gently in the process of transportation and installation to avoid serious collision, especially to avoid direct contact with metal instruments or impact on the ceramic layer on the end surface.2. The qijing bending pipe is installed with directivity. When the bending pipe is installed, the direction indicated by the arrow on the surface of the bending pipe should be consistent with the flow direction of the conveying medium.3. When installing the pipe, the pipe should be aligned with the center line and level should be adjusted to make sure that both ends meet accurately.The displacement of both ends should be controlled within 1.0mm.4. When the flexible pipe joint is used to connect and install the pipe, the inserted lengths of both ends of the flexible pipe joint shall be adjusted symmetrically.Since the thermal expansion coefficient of the composite pipe is about 1/3 of that of steel, the expansion clearance can be reduced by 3-5mm.5. When using flange connection, the flange end shall be flush with the end of the composite pipe.6. Due to the excellent welding performance of the composite pipe, the pipe connection can be conducted by welding. However, when welding, 45o-60o "V" type slope Angle is 2-4mm and gap is 0.8-1.2mm.PACKINGFAQ:Q: Are you trading company or manufacturer ?A: We are factory.Q: How long is your delivery time?A: Generally it is 15 days if the mould sizes are in stock. or it is 25 days if the mould sizes are not in stock, it is according to quantity.Q: Do you provide samples ? is it free or extra ?A: Yes, we could offer the stock sample for free charge but do not pay the cost of freight.Q: What is your terms of payment ?A: For new customers, 100% T/T in advance. For regular customers, 30% T/T in advance ,balance after received the B/L copy
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...