3003 Series Aluminum Manganese Alloy Ingot¹

Product Description Product No: Aluminum Alloy Ingot1, Application:It is widely applicable to new type of advanced material and special alloysin automobile/high-speed railway/aerospace/military industries/power and electronic/building material/food and medicine packaging and so on2,Manufacturing process:Optimizing raw materials → melting → matching ratio → primary purification → added alloying element → alloying → test → metallurgical structure control → secondary purification → functional testing → casting → furnace after testing → pallet packaging → exterior final inspection → entering warehouseMAIN PRODUCTS OF THE CHEMICAL COMPOSITION Product nameProduct nameFunction & ApplicationApplication conditionAluminium and titanium alloyAl-TI AlloyAl-TiRefine the grain size of aluminium and aluminium alloy, and improve the mechanical property of materials720oC put into molten aluminium Aluminium rare earth alloyAl-ReImprove the corrosion resistance and heat resistant strength of the alloyAfter the completion of refining, put into 730oC molten aluminiumAl-B alloyAl-BRemove the impurity element of electrical aluminium, and increase electric conductivityAfter the completion of refining, put into 750oC molten aluminiumAl-Sr alloyAl-SrBe used for Si metamorphism and treatment of permanent mold casting, low-pressure casting or long-term casted eutectic and Improving property of castings and alloysAfter the completion of refining, put into 750oC-760oC molten aluminiumAl-Zr alloyAl-ZrRefine grains and improve high-temperature strength and weldability Al-Si alloyAl-SiBe used for the addition or adjustment of SiBe used for the elemental addition and simultaneously putting into furnace of solid materials; the elemental adjustment is put into 710-730oC aluminium-water, and it is just needed to stir for 10 minutesAl-Mn alloyAl-MnBe used for the addition or adjustment of MnBe used for the elemental addition and simultaneously putting into furnace of solid materials; the elemental adjustment is put into 710-760oC aluminium-water, and it is just needed to stir for 10 minutesAl-Fe alloyAl-FeBe used for the addition or adjustment of FeBe used for the elemental addition and simultaneously putting into furnace of solid materials; the elemental adjustment is put into 720-770oC aluminium-water, and it is just needed to stir for 10 minutesAl-Cu alloyAl-CuBe used for the addition, matching or adjustment of CuBe used for the elemental addition and simultaneously putting into furnace of solid materials; the elemental adjustment is put into 710-730oC aluminium-water, and it is just needed to stir for 10 minutesAl-Cr alloyAl-CrBe used for the elemental addition or composition adjustment of wrought aluminium alloyBe used for the elemental addition and simultaneously putting into furnace of solid materials; the elemental adjustment is put into 700-720oC aluminium-water, and it is just needed to stir for 10 minutesAl-Be alloyAl-BeBe used for the oxidation film filling and micronization in the process of aviation and spaceflight aluminium alloy productionAfter the completion of refining, put into 690oC-710oC molten aluminiumRemarks:The application temperature of the elemental adding alloys should be increased by 20oC correspondingly when the concentration content is increased by 10oC.Refined and metamorphic alloys are needed to add into pure aluminium-water, namely, it is needed to use after the completion of the refining and deslagging process to avoid the effect recession or weaken caused by impurities.METAL FLUXER SERIESName Usage%Temperature/oCUseCoverer CHT-FG0.8-0.1kg/m2<660oCAll other kinds of aluminium and aluminium alloy except high magnesium alloy. Magnesium coverer CHT-MF0.5-1.0kg/m2450oCMainly for the covering of magnesium and magnesium alloy to avoid oxidation damageSodium -free coverer CHT-WNF0.3kg/m2 700-740oCFor the covering of aluminium melt that cannot touch sodium to avoid oxidizing and damaging the aluminium liquid.Fluxer 1 CHT-JL10.3<0.5%640oCUsed for refining of series of processing aluminium alloy and pure aluminium except for high magnesium and popularly.Magnesium Refiner CHT-MJ1-1.5kg/Tm450oCMainly for the degassing and slag removal of magnesium and magnesium alloyDegassing refiner CHT-CJL0.1-0.2%680-750oCDegassing refiner is a relatively traditional lump refiner; it has a double effect of slag removal and degassing. By far, it is widely acknowledged as the most effective solid refiner. High-efficiency and Non-toxic Refiner CHT-GJL0.1-0.2%680oCFor aluminium and aluminium alloy except high magnesium allySodium-free Refiner CHT-WNJ2-5 kg/T al700-730oCThe product mainly for the aluminium alloy, degassing and slag removal of wheel hubs, pistons and sodium of cars.Power spraying refiner CHT-PJL0.1-0.2%700-750oCIt has the product mainlyUniversal Fluxer CHT-WN0.2-0.5%710-750oC Phosphorus-copper Modifier CHT-LT0.4-0.6%  Aluminium-phosphorus Alloy Modifier CHT-LL0.2-0.4%  Copper-phosphorus Alloy Modifier CHT-TL0.4-0.5%750-760oC Phosphorus-silicate complex Modifier CHT-BZ10.8-1.2&  Phosphorus-sulfur complex Modifier CHT-BZ21.2-1.5%  Three-component Modifier CHT-BZ32-3%  Refining Modifier CHT-BZ41.4-1.6%  Strontium Slat long-seffect Modifier CHT-BZ51.0%>720oC  

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.