CIPDB › China Industry › Metallurgy, Mineral & Energy › Solar & Renewable Energy
Jchx Galvanized Steel Strut Structure C U Steel Unistrut Channel for Solar Mounting1
Solar Renewable EnergyU SteelC Steel
Tianjin Jucai Huixin Industry and Trade Co., Ltd.
Preview:
Product Description Product Description MaterialCarbon SteelGradeQ235/355,etcSize41*41mmWall Thickness2.5mmCoatingHot Dipped GalvanizedWeight/Piece11.7-15.4 kgInventory Specification41*41/41*52/41*62CustomizationYesSurface TtreatmentZinc CoatedService Lifeover 25 yearTransport PackageBundled straps, wooden boxes, or wooden palletsSpot Inventory Quantity10000 TonsAnnual Capacity1000000 Tons per yearDelivery Time3-45 DaysSamplesFreePayment MethodTT,alipay,wechat,bank card,etcAccept OEM or notcan accept oem odmProduction Capacity2000 Ton/WeekCountry Of OriginTianjin ChinaCorrosion Resistancevery strong JCHX Factory Price Galvanized Steel Strut Structure C U Steel Unistrut Channel for Solar Mounting is a highly corrosion-resistant and popular photovoltaic bracket variety. It not only has good yield strength and tensile strength, but also has good wear resistance. The thick hot-dip galvanized protective layer on the surface of the bracket strut channel can better adapt to various harsh climates such as drought, humidity, salt spray, rain and snow. Especially suitable for coastal climate. Product ParametersJCHX Factory Price Galvanized Steel Strut Structure C U Steel Unistrut Channel for Solar Mounting have those advantages:1.Highly corrosion-resistantJCHX Factory Price Galvanized Steel Strut Structure C U Steel Unistrut Channel for Solar Mounting has excellent weather resistance, corrosion resistance, fatigue resistance, and is a material with uniform stress. It can resist external forces such as wind, snow, and earthquakes, ensuring the safety of solar photovoltaic modules and adapting to most harsh weather conditions.2. High structural strength and stabilityJCHX Factory Price Galvanized Steel Strut Structure C U Steel Unistrut Channel for Solar Mounting of carbon steel through hot dip galvanized treatment, which has sufficient structural strength and stability, and can well resist the impact of earthquakes and wind and snow on the bearing capacity. CertificationsOur FactoryJucaiHuixin - Global Expert in Intelligent Photovoltaic Bracket Manufacturer Core Strength Supporting a Green FutureWith 4 years of industry expertise, a new benchmark in photovoltaic manufacturing has risen in Daqiuzhuang Town, Tianjin, the industrial heart of North China.√ 10,000 square meter Intelligent Manufacturing Base: A 10,000 square meter physical factory with a registered capital of 50 million, ensuring robust capabilities.√ Advanced Production Matrix: 10 internationally advanced CZU steel automated production lines, producing 200,000 tons of profiles annually.√ National Team Certification: Dual-certified as a AAA+ contract-abiding and creditworthy enterprise, and a AAA model of integrity in business.√ International Passport: A grand slam of global authoritative certifications including ISO triple system, CE, and Rohs.Ace Product Matrix Meeting All Scenario Needs Four GuardiansPhotovoltaic Bracket SystemsHot-dip Galvanized Series: Super corrosion resistance, protecting power stations for over 25 years.Zinc-Aluminum-Magnesium Series: Self-repairing black technology, the first choice for harsh environments.Aviation Aluminum Series: Lightweight and high-strength, perfect for rooftop projects.Stainless Steel Series: Salt spray resistant, expert for offshore projects.Popular WarriorsStar Products? BIPV Building Integrated Photovoltaic Waterproof Bracket? Ground Array: Reinforced system dedicated to large power stations.? Photovoltaic Carport: A tri-integrated solution for power generation, parking, and charging.? Single-axis Tracking System: Intelligently tracks sunlight, increasing power generation by 30%.National Project Preferred Brand Deeply involved in national energy strategic projects:? Ningxia Million Kilowatt-level Photovoltaic Oxygen Production Super Project? CR Power 90,000 kW Wind-Solar-Storage Integrated Demonstration Project? Jinzhai Revolutionary Old District Hundred Megawatt Poverty Alleviation Power Station? Zhangjiakou, Ecological Photovoltaic Project ★ Five-star Service Commitment ★(Service Visualization)1v1 Exclusive Butler: Full escort from design to installation guidance.24-hour Cloud Escort: Uninterrupted global time zone response.0 Yuan First Experience Service: Free design + sample experience.Get Your Exclusive Sun-tracking Solution Now Click to Consult → Professional team responds within 10 minutes.Sample Application → Delivered within 72 hours.Customized Solution → 3D modeling provided within 48 hours. JucaiHuixin - Making Every Ray of Sunshine Valuable!"FAQ 1. What is the factory price range for your Galvanized Steel Strut Channel? The factory price of our Galvanized Steel Strut Channel varies by specifications (e.g., size, thickness, finish) and order quantity. For standard 41x41x2.5mm hot-dip galvanized strut channels, the price typically ranges from 0.50-1.50 per kilogram for bulk orders (1 ton or more). Smaller orders (less than 1 ton) may have slightly higher per-unit costs due to production and logistics adjustments. Contact us directly with your specific requirements for an accurate quote. 2. What material grades are available for the galvanized strut channel? We offer two primary material grades for our galvanized strut channels:Carbon Steel: The most cost-effective option, suitable for general-purpose applications (e.g., rooftop solar mounting, indoor electrical support). It is hot-dip galvanized to resist corrosion.Stainless Steel (304/316): Recommended for harsh environments (e.g., coastal areas, chemical plants) where corrosion resistance is critical. 304 offers good resistance to rust, while 316 provides superior protection against saltwater and chemicals. 3. What surface finishes does the product come with? Our galvanized strut channels are available in three main surface finishes to suit different environments:Hot-Dip Galvanized (HDG): The most popular choice, providing a thick zinc coating for long-term outdoor corrosion resistance (ideal for rooftops, ground-mounted solar systems).Pre-Galvanized (GI): A thinner zinc coating applied before forming, suitable for indoor or dry environments (e.g., warehouses, indoor electrical racks).Powder Coated: A colored epoxy or polyester coating for aesthetic appeal and additional chemical resistance (available in black, silver, or custom colors). 4. What sizes of galvanized strut channels do you offer for solar mounting? We stock a range of standard sizes optimized for solar mounting applications:41x41mm (C-channel): The most widely used size for solar panel racking, providing a balance of strength and weight.41x21mm (Slim C-channel): Ideal for lightweight solar panels or space-constrained installations (e.g., carports, small rooftops).Thickness: 1.5mm-3.0mm (standard for solar mounting is 2.0mm-2.5mm to support 50-300kg/m load).Custom sizes (e.g., 50x50mm, 100x100mm) are available for large-scale projects-contact us to discuss your needs. 5. What is the maximum load capacity of your galvanized strut channels? The load capacity depends on the channel's size, thickness, and span. For example:A 41x41x2.0mm hot-dip galvanized strut channel can support approximately 500-600kg/m (uniform load) over a 1-meter span.A 41x41x2.5mm channel increases this to 700-800kg/m, suitable for heavy solar panels or wind loads.Always refer to our technical datasheets or consult our team for load calculations specific to your project (e.g., span length, wind speed, snow load). 6. Can the strut channels be cut or modified on-site? Yes, our galvanized strut channels can be easily cut or modified on-site using standard tools:Cutting: Use a hacksaw, angle grinder, or metal shear to trim the channel to the desired length.Drilling: Pre-drilled holes (standard spacing: 50mm or 100mm) allow for easy bolt installation. For custom holes, use a drill bit slightly smaller than the bolt diameter to avoid cracking the zinc coating.Welding: Carbon steel channels can be welded, but stainless steel channels require specialized equipment to prevent contamination of the zinc coating.Note: Avoid cutting near the edges of the zinc coating to prevent rust-re-coat cut edges with cold galvanizing spray if necessary. 7. What is the lead time for orders? Lead times vary by order quantity and customization level:Standard Sizes (In-Stock): Orders for pre-made 3m-6m lengths (standard sizes) are shipped within 15-30 days after deposit payment.Custom Sizes/Quantities: For non-standard sizes (e.g., 100x100mm) or large orders (over 10 tons), lead times extend to 30-45 days due to production scheduling.We prioritize bulk orders for solar mounting projects-contact us to confirm lead times for your specific timeline. 8. Do you offer OEM/ODM services for galvanized strut channels? Yes, we specialize in OEM/ODM services for galvanized strut channels. Whether you need custom sizes, finishes, or packaging (e.g., bulk bundles, palletized), our team can accommodate your requirements. We also provide technical support to ensure the channels meet your project's design standards (e.g., load capacity, corrosion resistance). 9. What is the warranty for your galvanized strut channels? We offer a 1-5 year limited warranty against manufacturing defects (e.g., cracks, coating peeling, dimensional inaccuracies). The warranty period depends on the finish:Hot-Dip Galvanized: 3-5 years (protects against rust for outdoor use).Pre-Galvanized: 1-2 years (suitable for indoor use).Powder Coated: 2-3 years (resists scratches and fading).The warranty covers replacement or repair of defective products-contact us with proof of purchase for claims. 10. How do you ensure the quality of your galvanized strut channels? We adhere to strict quality control measures to ensure our products meet international standards:Material Inspection: Raw materials (carbon steel/stainless steel) are tested for tensile strength, yield strength, and chemical composition.Galvanizing Process: Hot-dip galvanizing is performed in accordance with ASTM A123 standards, ensuring a minimum zinc coating thickness of 85 microns (for outdoor applications).Dimensional Checks: Each batch is inspected for size accuracy (width, height, thickness) using precision tools.Load Testing: Random samples are tested for load capacity using universal testing machines to verify compliance with industry standards (e.g., MFMA, ISO).We also provide third-party inspection reports (e.g., SGS, BV) for large orders-contact us to request documentation.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...