CIPDB › China Industry › Metallurgy, Mineral & Energy › Steel & Products
Oil and Gas Pipeline Pipe Factory Supply API 5L ASTM A106 A53 Grade B Sch40 Hot Rolled/Cold Rolled Carbon/Mild Steel Ms Iron Black Welded Seamless Tube/Pipe1
Steel ProductsSeamless PipeSeamless Steel Tube
Shandong Chicago Material Co., Ltd
Preview:
Product Description Oil And Gas Pipeline Seamless Pipe Factory Supply API 5L ASTM A106 A53 Grade B Sch40 Hot Rolled/Cold Rolled Carbon/Mild Steel MS Iron Black Welded Tube/Pipe Product DescriptionCarbon Steel Seamless Pipe/TubeSeamless steel pipe is a tubular section or hollow cylinder, usually but not necessarily of circular cross-section, used mainly to convey substances which can flow - liquids and gases (fluids), slurries, powders and masses of small solids.Hot rolled seamless steel pipe deformation process can be summarized as three stages: extension, perforation and finishing. Hot rolled seamless steel pipes is relative to the cold-rolled, cold rolling is below the recrystallization temperature of the rolling and hot rolled is carried out at above the recrystallization temperature of the rolling. Hot rolled seamless steel pipe can damage the refinement of the crystal grains of the steel, cast microstructure of the steel ingot and eliminate the defects of the microstructure so that the the steel organization compacting, improves the mechanical properties. This improvement is reflected in the rolling direction so that the steel is no longer at a certain extent isotropic; pouring the formation of bubbles, cracks and osteoporosis, under high pressure and temperature can also be welded together.Hot Rolled Steel Pipes (Seamless Tube) in different size, specifications, grades & thickness as per the client's requirements. The range offered by tubes is available as per the international & national standard and can be available from us at affordable prices. These pipes are used in various application industry like shipbuilding, power plants, oil and gas, automotive, sugar mills and distilleries, cement and construction industries etc.1. Seamless steel pipe for structure (GBT8162-2008). Mainly used for general structure and mechanical structure. Its representative material (brand): carbon steel, 20, 45 steel; alloy steel Q345, 20Cr, 40Cr, 20CrMo, 30-35CrMo, 42CrMo, etc.2. Seamless steel pipes for conveying fluids (GBT8163-2008). It is mainly used for conveying fluid pipelines in engineering and large-scale equipment. The representative material (grade) is 20, Q345, etc.3. Seamless steel pipes for low and medium pressure boilers (GB3087-2008) are used to manufacture various structures of low and medium pressure boiler superheated steam pipes, boiling water pipes and superheated steam pipes, large smoke pipes, small smoke pipes and arch bricks for locomotive boilers Hot-rolled and cold-drawn (rolled) seamless steel pipes of high-quality carbon structural steel for pipes. The representative material is 10, 20 steel.Product ParametersStandardAPI, ASTM, BS, DIN, GB, JISOuter Diameter10.3mm-2032mmWall Thickness1.24mm-63.5mmDia ToleranceControl with in the standard, OD:±1%, WT:±10%Materials10#, 20#, 45#, Q235, Q345, Q195, ASTM A53/ A106/ A178/ A333/ A335, SAE1018, SAE1020, SAE1045, ST37, ST37-2, ST35, ST45, ST52, ST35.8, 19Mn5, 16Mn, SS400, Q345B, 27SiMn, 20Cr, 40Cr, 12CrMo, 15CrMo, 30CrMo, 35CrMo, 42CrMoLength1m,3m,4m,5.7m,5.8m,6m,8m,11.8m,12m or according to buyer's requestType of pipe coatingEpoxy powderInspectionISO, BV, SGS, MTCPackingSteel strip packed. Standard Export Seaworthy Package. Suit forall kinds of transport,or as requiredApplicationAccessorize, machinery parts, structure steel pipe, piling pipe, sewage and clear water transportation, Line pipe for petroleum and so onEnd TreatmentPlain End/Bevelled End/Grooved End/Threaded End With Plastic CapsShipment timeWithin 7-10 workdays after receiving deposit or L/CMarketSoutheast Asia, Middle East, Africa, Europe, South American and so on DescriptionsGradesStandardSpecification(OD*WT)mmUsageStructural steel pipe20# 35# 45# Q345B, 16Mn, Q345B-E, 20Mn2, 25Mn, 30Mn2, 40Mn2, 45Mn2, SAE1018, SAE1020, SAE1518, SAE1045.GB/T8162-2008, ASTM A29/A29M-20156-1020*1.5-100For commom structureFluid steel pipe10#, 20#, ASTM A106, A210, A53, 16Mn, Q345A.B.C.D.E, Q295B.C.D.EGB/T8163-20088-630*1.0-40Fluid feedingHigh pressure boiler pipe20G, 15MnG, 20MnG, 15CrMoG, 12Cr1MoVG, St35.8, St45, SA106b, SA106c, SA210a, SA210c, A335P2, P11, P12, P22, P91, P92, A213 T2,T9, T11, T12, T22, T23, T91GB/5310-2008, ASTM A 106-99, DIN 17175-7914-630*2-80Temperature-resistant seamless steel pipe far high-pressure boilerOil casing pipeAPI SPEC 5CT J55, K55, N80, L80, C90, C95, P110API SPEC 5CT, SY/T6194-96, GB/T222-84,10-530*1.5-36Boiler pipes for refinery,heatexchangeing pipes,seamless steel pipes for pipelinePipelineAPI SPEC 5L, X42, X52, X60, X65,X70,X80ASTM A53, ASTM A106, ASTM A333, BS301, BS3602, BS3603, BS3604, PSL1, PSL2, DNV-OS-F101, CSA-Z245API SPEC 5L, ISO 3183, GB/T 971160-630*1.5-40Carrying gas,water or oil in the industries of petroleum and natural gasAlloy steel pipe4140, 42CrMo, 32CrMo, 15CrMo, Cr5Mo, 13CrMo44, 12Cr1MoV P22 T91,P91,P9, T9, Wb36GB5310-95, GB9948-88,ASTM A335/A335M, ASTM A213/213M, DIN17175-79, JISG3467-88, JISG3458-8816-824*2-100The seamless steal pipes features resistance to high presure,high/low temperature and corrosion ano is used in the industries of petroleum, chemical engineering and. Electric pwer as well as boilerHydraulic prop pipe20#, 45#, 27SiMn, 30CrMoSiAGB/T17396-200970-377*9-40Coal mine hydraulic support and pillar cylinder, column, can also be used for other hydraulic cylinder, columnASTM A53 Carbon Steel Pipe & TubeASTM A53 (ASME SA53) carbon steel pipe is a specification that covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8″ to NPS 26. A 53 is intended for pressure and mechanical applications and is also acceptable for ordinary uses in steam, water, gas, and air lines.A53 pipe comes in three types (F, E, S) and two grades (A, B).A53 Type F is manufactured with a furnace butt weld or may have a continuous weld (Grade A only)A53 Type E has an electric resistance weld (Grades A and B)A53 Type S is a seamless pipe and found in Grades A and B)A53 Grade B Seamless is our most polar product under this specification and A53 pipe is commonly dual certified to A106 B Seamless pipe.ASTM A53 seamless steel pipe chemical composition: GradeChemical Composition (%) Max.CMnPSCuNiCrMoVA0.250.950.050.0450.400.400.400.150.08B0.301.200.050.0450.400.400.400.150.08ASTM A53 seamless steel pipe Mechanical Properties:GradeMechanical PropertiesTensile Strength (Mpa)Yield Strength (Mpa)A≥48,000 (≥330)≥30,000 (≥205)B≥60,000 (≥415)≥35,000 (≥240)ASTM A53 steel pipe of size range NPSODW TINCHMMSCH10SCH20SCH30STDSCH40SCH60XSSCH80SCH100SCH120SCH140SCH1601/2″21.32.11 2.412.772.77 3.733.73 4.783/4″26.72.11 2.412.872.87 3.913.91 5.561″33.42.77 2.93.383.38 4.554.55 6.351.1/4″42.22.77 2.973.563.56 4.854.85 6.351.1/2″48.32.77 3.183.683.68 5.085.08 7.142″60.32.77 3.183.913.91 5.545.54 8.742.1/2″733.05 4.785.165.16 7.017.01 9.533″88.93.05 4.785.495.49 7.627.62 11.133.1/2″101.63.05 4.785.745.74 8.088.08 4″114.33.05 4.786.026.02 8.568.56 11.13 13.495″141.33.4 6.556.55 9.539.53 12.7 15.886″168.33.4 7.117.11 10.9710.97 14.27 18.268″219.13.766.357.048.188.1810.3112.712.715.0918.2620.6223.0110″2734.196.357.89.279.2712.712.715.0918.2621.4425.428.5812″323.84.576.358.389.5310.3114.2712.717.4821.4425.428.5833.3214″355.66.357.929.539.5311.1315.0912.719.0523.8327.7931.7535.7116″406.46.357.929.539.5312.716.6612.721.4426.1930.9636.5340.1918″457.26.357.9211.139.5314.2719.0512.723.8339.3634.9339.6745.2420″5086.359.5312.79.5315.0920.6212.726.1932.5438.144.4550.0122″558.86.359.5312.79.53 22.2312.728.5834.9341.2847.6353.9824″609.66.359.5314.279.5317.4824.6112.730.9638.8946.0252.3759.5426″660.47.9212.7 9.53 12.7 28″711.27.9212.715.889.53 12.7 ASTM A106 Seamless carbon steel tubeASTM A106 pipe (also covered in ASME specifications as S/A 106) is the standard specification for seamless carbon steel pipe for high-temperature service. Most common uses are in refineries and plants when gasses or fluids are transported at high temperatures and pressures.ASTM A106 Gr. B seamless steel pipe is a kind of low carbon steel widely used in petroleum, chemical industry and boiler industry. The material has good mechanical properties.Description1. Standards: ASTM A106 (ASME SA106)2. Products mainly used: apply to bending, curling and similar forming process.3. The main products of steel / steel grade: Gr.A, Gr.B, Gr.C.4. Specifications: diameter: 10.3 to 114.3 mm thickness: 0.8 to 12 mm Length: 6 m above, and, in accordance with customer demand, supply and other specifications of steel pipe.5. Chemical composition and mechanical properties6. JIS Number and Corrensponding Foreign StandardsChemical Composition And Mechanical PropertiesGradeChemical CompositionsCMnPSSiCrCuMoNiVA106-A≤0.250.27-0.93≤0.035≤0.035≥0.10≤0.40≤0.40≤0.15≤0.40≤0.08A106-B≤0.300.29-1.06≤0.035≤0.035≥0.10≤0.40≤0.40≤0.15≤0.40≤0.08A106-C≤0.350.29-1.06≤0.035≤0.035≥0.10≤0.40≤0.40≤0.15≤0.40≤0.08GradeMechanical PropertiesTensile Strength(Mpa)Yield Strength(Mpa)Elongation(%)A106-A≥330≥20530A106-B≥415≥24030A106-C≥485≥27530ASTM A106 Grade A, Grade B, Grade C seamless carbon steel pipes as below conditions:Standard: ASTM A106, Nace, Sour service.Grade: A, B, CRange of OD outer diameter: NPS 1/8 inch to NPS 20 inch, 10.13mm to 1219mmRange of WT wall thickness: SCH 10, SCH 20, SCH STD, SCH 40, SCH 80, to SCH160, SCHXX; 1.24mm up to 1 inch, 25.4mmRange of length: 20ft to 40ft, 5.8m to 13m, single random lengths of 16 to 22ft, 4.8 to 6.7m, double random length with average 35ft 10.7mEnds procession: Plain end, beveled, threadedCoating: Black paint, varnished, epoxy coating, polyethylene coating, FBE and 3PE, CRA Clad and Lined.API 5L line pipe (Seamless and welded pipe) of all grades have two product specifications, they are different on chemical composition, manufacturing processes, mechanical strength, heat treatment, test records, traceability etc.API 5L Chemical Composition: StandardSteelGradeChemical CompositeCMnPSSiVNbTiCEpcmAPI 5LL210 or A≤0.22≤0.90≤0.030≤0.030 ≤0.25L245 or B≤0.28≤1.20≤0.030≤0.030 ≤0.25L290 or X42≤0.28≤1.30≤0.030≤0.030 ≤0.25L320 or X46≤0.28≤1.40≤0.030≤0.030 ≤0.25L360 or X52≤0.28≤1.40≤0.030≤0.030 ≤0.25L390 or X56≤0.28≤1.40≤0.030≤0.030 ≤0.25L415 or X60≤0.28≤1.40≤0.030≤0.030 ≤0.25L245R or BR≤0.24≤1.20≤0.025≤0.015≤0.40CC≤0.04≤0.25L290R or X42R≤0.24≤1.20≤0.025≤0.015≤0.40≤0.06≤0.05≤0.04≤0.25L245N or BN≤0.24≤1.20≤0.025≤0.015≤0.40CC≤0.04≤0.25L290N or X42N≤0.24≤1.20≤0.025≤0.015≤0.40≤0.06≤0.05≤0.04≤0.25L320N or X46N≤0.24≤1.40≤0.025≤0.015≤0.40≤0.07≤0.05≤0.04≤0.25L360N or X52N≤0.24≤1.40≤0.025≤0.015≤0.45≤0.10≤0.05≤0.04≤0.25L390N or X56N≤0.24≤1.40≤0.025≤0.015≤0.45≤0.10≤0.05≤0.04≤0.25L415N or X60N≤0.24≤1,40≤0.025≤0.015≤0.45≤0.10≤0.05≤0.04NegotiateAPI 5L Mechanical Properties: StandardSteel GradeYield StrengthTensile StrengthAPI 5LL210 or A210335L245 or B245415L290 or x42290415L320 or X46320435L360 or X52360460L390 or X56390490L415 or X60415520L245R or BR245~450415~760L290R or X42R290~495415~760L245N or BN245~450415~760L290N or X42N290~495415~760L320N or X46N320~525435~760L360N or X52N360~530460~760L390N or X56N390~545490~760L415N or X60N415~565520~760 Detailed Photos Product TestWe will control the quality from part of material steel pipe, each pipe produced will be have it is own identify label, quality will check the chemical component and physical property and then provide material test certificate. Size dimension will be checked and show pictures to customer to guarantee all goods will be meet requirement.Product ApplicationCarbon steel pipe and tube are used in high-pressure conditions. They are highly resistant to shock and vibration, making it ideal to transport fluids.Carbon steel pipes are widely used in a number of industries, such as construction material, buidlings, bridges, transporting water and sewage, oil and gas industries, boiler and condenser tubes, high-pressure applications, and chemical processing.- Construction material / bridges- Transporting water and sewage- Oil and gas industries- Boiler and condenser tubes- High-pressure applications- Chemical processingPackaging & Shipping1) Packaging: 3 layers of packing. Inside is craft paper, Middle is water plastic film and outside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve or as customers' requirements.2) Shipping: We have long-term cooperation with many experienced shipping companies and will find the most suitable mode of transportation for you.3) Trade terms: FOB/CIF/CFR4) Shipping port: Qingdao/Tianjin/Shanghai5) Shipment: A: Length: ≤6m, loaded in 20GP Container. B: Length: ≤12m, loaded in 40GP Container.Remark: Size of 20GP Container (inside :5898*2352*2393mm); Size of 40GP Container (inside:12032*2352*2393mm); Size of 40HQ Container (inside:12032*2352*2698mm).6) Delivery time: Normal size: 7-15days send from warehouse directly. Special size:15-30days custom made for you. CertificationsOur ServiceFAQQ1:Can you send samples?A:Of course, we can provide customers with free samples and express shipping service to all over of the world.Q2:What product information do I need to provide?A:Please kindly provide the grade, width, thickness, surface treatment requirement should you have and quantities you need to purchase.Q3:It's my first time to import steel products, can you help me with it?A:Sure,we have agent to arrange the shipment, we will do it together with you.Q4:What ports of shipment are there?A:Under normal circumstances, we ship from Tianjin port, you can specify other ports according to your needs.Q5:What about product prices information?A:Prices various according to periodic price changes of raw materials.Q6:What is your terms of payment ?A:Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shipment or based on BL copy or LC at sight.Q7:Do you provide custom made Products service?A: Yes,if you have your own design , we can produce according to your specification and drawing.Q8:What are the certifications for your products?A:We have ISO 9001, MTC, third parties' inspections are all available such SGS, BV ect.Q9:How long does your delivery time take?A:In general, our delivery time is within 7-15 days, and may be longer if the quantity is extremely large or special circumstances occur.Q10: How many countries you already exported to?A:We have exported to America, Canada, Brazil, Chile, Colombia, Russia, Ukraine, Thailand, Myanmar, Vietnam, India, Kenya, Ghana,somalia and other African countries.Our export experience is rich, we familiar with different market demands, can help customers avoid a lot of trouble.Q11:Can I go to your factory to visit?A:Of course, we welcome customers from all over the world to visit our factory.Q12:Does the product have quality inspection before loading?A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed and customers can appoint third parties to inspect the products before loading too.Q13:How to pack the products?A: Standard export sea-worthy packaging, the inner layer has a waterproof paper outer layer with iron packaging and is fixed with a fumigation wooden pallet. It can effectively protect products from corrosion and various climate changes during ocean transportation.Q14:What is your working time?A:In general, our online service time is Beijing time: 8:00-22:00, after 22:00, we will reply to your inquiry in the coming working day. Top Quality, Best Price, Sufficient Inventory, Quick Delivery, Strict Quality Test, High Quality Service!Any requirements for our steel pipe,welcome to contact us at any time.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...