180MW Coal Fired Power Plant Power Station¹

Product Description Please click here >>>> Contact us for more factory prices,shipping and discounts. Product DescriptionMain equipment parameterGas turbine manufacturer: GEType: PG9171E (turbine and its auxiliary complete import)Fuel: natural gas/ light oilTechnical performance index with basic load (ISO standard conditions: 15 oC; 1013 mbar; 60% R.H)Intake pressure drop: 75mmH2ODischarge pressure drop: 75mmH2O combined cycle: 300mmH2OGenerator end output power: simple cycle: 123MW (natural gas); 121MW (light oil)Combined cycle: 120MW( natural gas); 118MW(light oil)Heat consumption rate(LHV): simple cycle: 10656kJ/kWhCombined cycle: 6970kJ/kWhHeat consumption: 1.315×109kJ/hSteam consumption (LHV): 32705.7Nm3/hHeat efficiency: (LHV): simple cycle: 33.6%Combined cycle: 51%Turbine inlet initial temperature: 1124oC( natural gas); 1104oC (light oil)Turbine exhaust temperature: 538 oC (natural gas);535 oC (light oil)Generator1. Type: BOAX 9-450 ERH Three phase star connection, ground connection of neutral point through grounding transformer2. 909180.0103. Serial No.:340×9044. date of manufacture:20045. manufacturer:BRUSH BEM Ltd.6. cooling type: air cooling7. Rated output capacity: 168.75MVA8. rated voltage:15kV9. rated current:5437A10. rated power:135MW11. rated power factor:0.812. cooling water temperature:40oC13. rated speed:3000rpm14. frequency:50Hz15. insulation grade:F16. excitation:184V/1392A17. manufacturing standard:IEC60034-318. protection class:IP54Heat recovery boiler:manufactured by Hangzhou Boiler, the boiler is tri- pressure un-fired vertical combined cycle unit, outdoor arrangement. Its type: Q1149/548-185(34)-6.1(0.5)/527(257). HP system: maximum-continuous evaporation capacity 177.7t/h, pressure 6.1MPa, temperature is 527oC;LP system: maximum-continuous evaporation capacity is 31.5t/h, pressure 0.5MPa, temperature 257oC, feed water temperature is 104-108oC, exhaust gas temperature is 120oCTurbine: dual pressure, single stage adjustable extraction condensing steam turbineType: LCZ60-5.7/1.57/0.58 dual- pressure extraction condensing turbineGenerator: manufactured by Nanjing Turbine Group 60MW, air cooling, brushless excitationOperation and maintenance conditionNormal maintenance for equipment during shutdown, turning gear for turbine and gas turbine for more than 12 hours, boiler drying maintenance, putting the quicklime into HP and LP drum to ensure internal dry of boiler steaming-water system, air conditioner shall operate for gas turbine control room ensure the constant temperature and humidity, the damp removal heater inside of gas turbine generator is in a state of electric heat.After dismantled, the unit is stored in Xinhai village which site is ground concrete hardening, details are as follows:1. Gas turbine generator, turbine, generator, gas turbine turbine and base, protection packing cabinets, 6Kv and 400V motor are covered by tarpaulin, deposited in the outdoor, the damp removal heater inside of gas turbine generator is in a state of electric heat2. The TCC control rooms, two transformers, auxiliary equipment, boiler module and so on are all in open air;3. Precision parts, such as turbine proper and rotor is packaged storage with oil and antirust4. Disassembly parts of gas turbine proper stored in a container to store;5. Electrical panel and cabinet paper packing after seal packaged; Company ProfileRunh Power Corporation Limited was founded in 1996 as one of the earliest independent EPC contractor of power plant and later incorporated one of the most famous turbine designer and manufacturer, Qingdao ChuangNeng  Steam Turbine Co.,Ltd (better known as CNT in China). With subordinate design institute founded in 2001, Runh Power was bestowed upon the capability of providing one-step, package technical solution of thermal, hydraulic, solar, biomass power plant. Scope of service includes :A. EPC (Engineering, Purchase & Construction) project of power plant plus financing service.  Power plant project on EPC basis (or "on turnkey basis") is characterized by the overall package solution provided by the contractor. Runh Power's service covers survey all the way till final acceptance.Link : http://runhpower.en.made-in-china.com/product/nMEJYUBcswAe/China-Runh-Power-s-Power-Plant-EPC-Contractor-Plus-Financing-Provider.html  1. Thermal power plant EPC project    Thermal power plants refer to power plants generating power from fossil fuel, such as coal,  heavy oil or natural gas. Thermal power plant, being the most common in the world, has been a speciality of Runh Power since its very foundation.    Link: http://runhpower.en.made-in-china.com/product/SBwxICvUkRYO/China-Thermal-Power-Plant-Project-EPC-Contractor.html   2. Biomass power plant EPC project   Biomass such as bagasse, bark, straw, stalk of plants has become a good resource of fuel for power plants in the last decade. The ash is often collected and processed to fertilizer for additional economic gain. Runh Power is well experienced in building biomass power plants in Ecuador & Pakistan.    Link: http://runhpower.en.made-in-china.com/product/RexQhMvGhZAs/China-Biomass-Power-Plant-EPC-Contractor-Financier-Renewable-Energy.html   3. Animal dung power plant EPC project   Treatment of livestock's dung can be a real headache, especially for ranch owners or dairy farmers. However, with the help of CFB boiler provided by Runh Power, it can be good resource of fuel just as coal or biomass.   Link: http://runhpower.en.made-in-china.com/product/QvwnjdBGEpRS/China-Livestock-Dung-Power-Plant-EPC-Contractor-Renewable-Energy.html   4. Municipal Solid Waste (MSW) power plant EPC project Other than being buried in landfill, garbage can find its way to boiler. Runh Power has profound expertise in aspects such as selection of combustible waste, eco-friendly treatment of ash, etc.Link: http://runhpower.en.made-in-china.com/product/DSwEqIvCkRrN/China-Municipal-Solid-Waste-Power-Plant-Project-EPC-Contractor-Renewable-Energy.htmlB. EPC project of Steam Turbine Island (STI)  Steam turbine island refers to a steam turbine along with all the accessories and auxiliary systems, including turbo-generator set,condensation system and various sub-systems.Link: http://runhpower.en.made-in-china.com/product/hbJmEuBKJdfU/China-Steam-Turbine-Island-Power-Plant-EPC-Contractor.htmlC. Steam turbine   1. Back pressure turbine: Best known for its simple structure, low maintenance cost and relatively high thermal efficiency.Link: http://runhpower.en.made-in-china.com/product/lMJmfuSdJOGn/China-Back-Pressure-Steam-Turbine-Power-Plant.html  2. Condensing steam turbine : Popular for its wide range of power (3 to 60MW) and the convenience of repurposing by adding additional steam extraction exit.Link: http://runhpower.en.made-in-china.com/product/tbEmABSCZwaZ/China-Condensing-Steam-Turbine-Power-Plant-EPC-Contractor.html  3. Condensing & extracting steam turbine (a.k.a cogeneration unit): welcomed for its application in power plants and cogeneration, convenience in switching between the condensing unit and cogeneration unit by simply adjusting the extraction rate.Link:  http://runhpower.en.made-in-china.com/product/GqxJRuXYTZAE/China-Condensing-Extracting-Steam-Turbine-Power-Plant-Contractor.html  4. Condensing & double extracting steam turbine: Mostly used for cogeneration purpose. It's structure allows to to produce steam of two sets of parameters, such as temperature, pressure, flow, to be extracted from two exits for different purposes, which makes it popular in industies such as food-processing or phamarciuticals where steam of different parameters are often needed.Link: http://runhpower.en.made-in-china.com/product/hSdnNIkrCpRH/China-Condensing-Steam-Turbine-with-Double-Extracting-Exits-for-Power-Plant.html  5. Inducting steam turbine: Being able to fully exploit residual heat from steam, a byproduct in cement, food processing, etc, allows it to maximize ecomonic viability by generating power.Link: http://runhpower.en.made-in-china.com/product/JBOQnHeMHrUj/China-Inducting-Steam-Turbine-Power-Plant-EPC-Contractor-Runh-Power.htmlD. Spare parts and quick-wear parts.  1. In case the owner of power plant prefers to do maintenance independent of Runh Power's assistance, Runh Power is also glad to provide a wide range of parts, especially quick-wear parts constantly needed in regular maintenance. Link: http://runhpower.en.made-in-china.com/product/RKOmcohdCrpt/China-Spare-Parts-etc-for-Steam-Turbine-Maintenance-and-Power-Plant.html 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.