Bottom Printing Flexo Folder Gluer Carton Printing Slotting Die Cutting Machine¹

Product Description Bottom Printing Flexo Folder Gluer Carton Printing Slotting Die Cutting MachineProduct DescriptionPaper Feeding Unit1.It's composed of a paper stacking platform, a cardboard bracket, paper feeding wheels, paper transfer pressure rollers, etc. 2.It's equipped with an alarm bell, which continuously sounds the alarm during operation to ensure the safety of the operator. 3.The leading edge paper feeding system is equipped with a vacuum adsorption conveying and feeding device. The suction force can adjust the air volume according to the bending degree of the cardboard to ensure smooth paper feeding. 4.The paper feeding part, printing part, and die-cutting part are all electric and automatically return to zero. 5.Ordinary cartons use an automatic zeroing device, which can be adjusted to the correct position after two trial prints to reduce cardboard waste. 6.The whole vacuum suction leading edge, paper fed by servo motors, it has the characteristics of fast response, higher registration precision, better stability and longer service life. Its characteristic is that it can better protect the original strength of the cardboard and avoid collapse and thinning.Printing Unit1.Adopt PLC color touch screen to operation and monitor production status. 2.Printing unit: returns to the"ZERO" resetting function, return to original printing position function, clean printing plate rotation, printing roller automatically records the relative position of each color before stopping. 3.The center line mark of the printing plate is engraved in the center of the printing roller for the reference of installing the printing plate. 4.Adopt groove mounting design for printing rolls, and the locking devices on both sides make the registration of the version more accurate. 5.Pneumatic brake type brake mechanism. When the unit is separated to adjust the phase or clean, the brake mechanism restricts the gear rotation and maintains the original gear position. 6.Our flexo folder gluer is equipped with vacuum adsorption conveying fan, and full-wheel vacuum adsorption (the rollers adopt wear-resistant ceramic wheels). The transfer platform can float up and down, and the pressure roller gap is controlled by the computer and dial, with an adjustment range of 0-12 mm. Vacuum adsorption type can better protect the original strength of the cardboard and avoid collapse and thinning, and to ensure the smoother cardboard input.Slotting Die Cutting unit1.Adopt PLC color touch screen operation and monitor production status. 2.When the die cutter roller and the rubber roller are not working status without die-cutting process, the cylinder eccentric device is automatically or manually detached, which can reduce the no-load load of the machine and extend the life of the die cutter rubber and die cutting blade. 3.If produce both irregular and regular cartons, we suggest client uses die cutter with slotting knife. 4.Equipped with emergency stop device to ensure safety. 5.Adopting a unique chip-type chip removal device to ensure the machine is clean and tidy. 6.Each slotting blade holder has a traversing mechanism, and the screw rod cooperates with the linear guide rail to make the movement more flexible and accurate. Equipped with anti-collision electronic protection device.Parameter ListModelKAF-0920KAF-1228KAF-1426KAF-1624Max.mechanical speed (pcs/min)300180180160Max.feeding size (mm)900*22001200*30001400*26001600*2600Min.feeding size (mm)680*250720*340720*360720*420Skip feeding size (mm)1100*22001400*30001600*28001800*2600Valid printing area (mm)900*20001200*28001400*26001600*2400Printing plate thickness (mm)7.27.27.27.2Min.slotting space (Upper knife)(mm)130*130*130*130130*130*130*130130*130*130*130130*130*130*130Min.slotting space (Lower knife)(mm)260*70*260*70260*70*260*70260*70*260*70260*70*260*70Max.slotting depth (mm)225300350400*If need higher speed or other flexo folder gluer configuration, please ask our salesteam for more details.Folding Gluing&Counting Stacking Unit1.Adopt PLC color touch screen to operation and monitor production status.2.Three sets of wall panels are used to fix the folding arm,so that the folding arm is stable.3.The printing department and the gluer department can realize differential speed linkage.4.The gluer belt automatically tracks to realize the minimum distance between the cardboard and the cardboard of 1.5-12mm, so as to reduce the speed of the belt, increase the speed of the gluer, and reduce unnecessary belt wear.5.The gluing unit adopts non-stop method or gluing system to avoid glue curing and the gap between rubber wheels is easy to adjust.6.The flexographic printing slotting speed produced by the folding belt and the conveyor belt is almost the same, avoiding out-of-synchronization between the gluing folding unit and the flexo printing slotting unit7.The stacking of cardboard adopts a combination of mechanical methods and sensors.8.Sensor counts the number of cartons for easy setup and accuracy.Parameter ListMax. working speed250pcs/minMax.cardboard size1250*2600mmMax.stacking height350mmMin.stacking height80mmMax.number in a stack30pcsMin.number in a stack10pcsTotal length14mCorrugated typeA,B,C,E,A+B,B+C,B+EMax.glue side size700mmMin size on the other side65mmAutomatic PP Strapping Unit1.The conveying platform has an automatic steering device to ensure that the cartons can be conveyed forward in the correct direction for better strapping. 2.The platform conveying shaft rotation speed can be adjusted to ensure that the cartons can be conveyed smoothly. 3.The main machine of the strapping machine is equipped with an infrared sensing system to achieve automatic packaging. 4.The head of the packing department adopts two sets of imported heads from Taiwan, which maximizes the stability of high-frequency packing and prolongs the service life of the whole machine. It is maintenance-free in a short period of time, and the interchangeability of the head and the universal rate of parts reach 100%. 5.The lubricating part of the machine adopts an automatic lubricating oil filling device, which can independently set the time and amount of lubricating oil filling, and will automatically alarm when the oil level is low. 6.The electrical department adopts four sets of servo devices. The automatic control of electrical appliances is combined with machinery, which can greatly improve the accuracy and logic of mechanical actions, reduce some mechanical parts, and reduce the failure rate due to mechanical wear.Parameter ListMax. strapping Size(L*W*H)1200*1200*350mmMin. strapping Size(L*W*H)270*350*150mmStrapping Speed30 straps/minMin space of 2 straps200mmSuitable PP strapw5mm*t0.6mmAir Perssure0.4-0.6MpaMachine power2.2kwWeight1280Kg*The above info is for reference, please ask our salesteam for a detailed datasheet.Optional Machines           Waste Paper Cleaning Device                                Automatic PE Strapping machine                     Semi-Auto PP strapping MachineOur printing slotting die cutting machine can print in multi-color and can handle a variety of cartons such as: fruit boxes, pizza boxes, shipping cartons, electrical appliance outer boxes, etc.FAQQ: Are you a factory or a trading company?A: We are a direct carton machinery manufacturer that is located in Dongguang county, Cangzhou city. Welcome to visit our factory! We can also have video call if you'd like an online factory tour. Q: How do you ensure your quality?A: 1. Trustworthy and long-term cooperative raw material suppliers;2. Skilled&experienced engineers&workers;3. Mature QC system;4. Specially-assigned merchandiser;5. Advanced production workshop. Q: Do you provide on-site installation and commissioning after purchasing the equipment?A: Yes, we have a professional after-sales installation and commissioning team. After you purchase our flexo folder gluer machine, we will arrange technicians to provide on-site installation and commissioning services, cost is negotiable. Q: Do you provide operation training? How long is the training, and what are the training contents?A: We will provide comprehensive operation training services for every customer who purchases our equipment. The training usually lasts about 7 days. The training contents cover the basic operation process of the carton printing slotting die cutting machine or corrugated paperboard production line and other carton machinery we sell, daily maintenance points, simple fault troubleshooting methods, and safety precautions, etc., ensuring that your operators can proficiently master the equipment operation skills. Q: What is the response time for after-sales service?A: We promise to respond within 1.5 hours after receiving your after-sales service request. In case of emergencies, we will give priority to arranging technicians to communicate with you as soon as possible and solve your problems through video call guidance, remote assistance, or on-site services according to the actual situation of the problem. Q: How many languages does your machine support?A: Our flexo folder gluer supports all the languages. Q: How long it will take to produce machine?A: Delivery time largely depends on the machine type, for some small machine like manual stitching machine, manual strapping machine etc, usually we have stock available.But for the large machines like carton printing die cutting machine, automatic stitching machine etc, it usually takes around 35-50 days to produce. Q: What are the consumable parts of the carton machinery, and is it convenient to replace them?A: Common consumable parts include anvil cover, feeding rollers, cutting knives, glue rollers, belts, and other components. The installation structure of these parts is simple and easy to understand. And we always maintain sufficient inventory of original consumable parts for your convenient purchase and replacement at any time, ensuring that the equipment can continue to operate stably.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.