BOPP Laser Thermal Lamination Film, Thermal Laminating Film, Hot Laminating Film¹

Product Description Product description:BOPP Thermal lamination film is a 2 layer product which consists of basic film and adhesive. It is suitable for dry laminating. The basic layer of film does not melt at laminating temperature. It is produced through the extrusion coating process where the adhesive is applied to the film.When heated, the adhesive melts to a tacky condition where is married to the printed sheet under extreme pressure. When cooled to a solid again. The adhesive provides a high strength chemical bond. Our adhesives give superior bond strengths on a wide vareiety of subject material. Such as paper,board,metal,plastics,etc. ItemThermal Lamination Film For Paper MaterialPET, PVC, BOPP, CPP,Processing typemultiple extrusion, end product in roll or sheetThickness (mm)18mic-27micUsed printing film, release film, metalized film,cpp/pet sealing film,heat transfer film, shrink film, laminating filmMain Size (mm)Width: less than 2000mmLength: variety Length you needColorsTransparent or clear plastic filmPacking DetailIn sheet or roll.PE film on both sides of film, wood pallets will be packed in the container.Features1.High chemical stability,fine anti- fire,super-transparent.2.Highly UV.stabilized,good mechanical features es,high hardness and strength.3.The sheet also has well aging resistance,good self-extinguishing property and reliable insensitivity.4.Moreover the sheet is waterproof an d has very good smooth surface,and is&nbs p;non deformable.Important item: the sheet anti- static,anti-UV,anti-sticky.Why Choose Us:Environmentally friendly:It is environmentally friendly,non-hazardous to health and safe to use as no toxic gases or volatile content is emitted.Safety in laminating process as no solvent based adhesive is used.High function: Compared with other solvent lamination, our film is better in clarity and bonding. Strong ability of absorbing powder, It prevents lamination from being pressed, bubbled and shredded off easily. Matt thermal lamination film is good for spot UV and hot stamping. Easy handling:It is easy to operate once the required temperature is met and no special technique required. Efficient and energy-saving: Production cost is reduced substantially as there is no film wastage, mixture of adhesive solvent, and no UV heating lamp is required. Adaptable to different kinds of machines: This film is recommended to be used in dry laminator. Small adjustments need to be made to the machine if the film is used in wet laminator. Process Parameter:Equipment for laminating film:dry and wet film laminator Temperature:Normal:85~100°C / Special:100~110°C Roller pressure:10~18Mpa Speed:8~50m/min Remarks:Special laminations refer to those with thicker ink, solid color, high moisture content and bigger size paper. Application manual:1. Adjust roller pressure and temperature according todifferent types of paper and ink. 2. When using the film for the first time or changing to other sizes,we recommend a small trial volume before going into fully mass lamination.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.