IPDB › China Industry › Tools & Hardware › Abrasive & Grinding
High Carbon Steel Cut Wire Shot 0.6mm for Shot Blasting1
Abrasive Grinding, Abrasive Grains, Steel Cut Wire Shot, Cut Wire Shot
Tengzhou Huacheng Metal Product Co., Ltd
Preview:
Product Description Product DescriptionDetailed PhotosProduct ParametersNameConditioned steel cut wire shotChemical compositionC0.45-0.75%Mn0.60-1.2%Si0.10-0.30%S≤0.05%P≤0.05%Hardness40-52HRCMetallographic structureDeformed pearliteDensity≥7.40g/cm3CertificationsPackaging & Shipping Company Profile ApplicationSteel Structural PartsFor the steel structure, the rate of corrosion is mainly related to the relative humidity of the air as well as the composition of the pollution in the atmosphere. In order to prevent or reduce metal corrosion and prolong its service life, do the surfacetreatment of steel structures, and then form a protective film on the metal surface by painting and spraying to isolate metals from corrosive media, so that can prevent corrosion of metals.Hull SegmentationThe quality of hull sandblasting abrasive directly affects the quality of coating, sandblasting efficiency, kinetic energy, abrasive consumption and other quality and cost factors. With the new performance standard for protective coatings(PSPC),the quality of segmented sand blasting now has higher requirements. Therefore, the quality of metal abrasive is particularly important in blasting .Port MachineryPort machinery has a high requirement of the corrosion resistance of steel structure because of the heavy use of them.Especially the port machinery is often close to some special circumstances such as humid environment, so the corrosion is very serious.In this case, requires the use of sandblasting and coating corresponding to complete protection of port machinery.ContainerBlast the container after welding can clean up the weld bead meanwhile make the surface has certain roughness,increase corrosion resistance of coating. So that the container can transfer between ships,chassis cars, trains and rolling stock.Wind Power EquipmentWind power products have specific requirements of roughness and cleaning grade for surface treatment.After the surface treatment, the products have to go through long and varied weather change, so it's particularly critical to do the sand blasting for the surface.Shot PeeningShotblasting is mainly used for the strengthening treatment of spring,laminated spring, torsion bar, gear, bearing, camshaft, crankshaft, connecting rod and other key parts.Stone CuttingUsing the metal abrasive and the kinetic energy of water jet, there is no chemical change during the cutting process. It has the advantages of no impact on the physical and chemical properties of the cutting material, no thermal deformation, narrow cutting seam, high precision, smooth and clean cut surface, clean and pollution-free.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.