High Resolution Flexographic Engraving Machine Flexo CTP for Label Printing¹

Product Description High Resolution Flexographic Engraving Machine Flexo CTP For Label PrintingModel: FL-400 Product DescriptionFL-400 is a semi-automatic digital flexo plotter utilizing infrared imaging at a wavelength of 830nm, which combines direct imaging technology with superior automation. The device is small, stable and easy to maintain. Specification ModelFL-400Exposing MothodExternal DrumImaging System16-channelThroughput1.25 m2plates/hourMax.output Size430mm x 330mmMedia TypeHeat corrosive film, Digital water washed letterpress, Digital water washed flexo plate, Digital solvent washed flexo plate, Thermal PS plate** Plate thickness is 0.15mm max and adhesive tape is needed on three sides edgePlate Thickness0.14mm to 1.70mmResolution4000dpiApplicationLabel and trademarkInterfaceUSB 2.0Plate Loading                               Manual load and unloadFocus AdjustAutofocusLaser PowerHigh power semiconductor laser diodeNet WeightAbout 280kgMachine Size(WxLxH)mm830 x 630 x 1056mmPower Supply220v/50hz, 60hz mainframe 0.5kw, vacuum 2.0kwOperation Environmentrecommended:18-30oC, Max.18-26oC, humidity:10-80%Flexo Relief Plate Making Processing:1.Computer to Flexo Plate:Before plate making, the computer system is used to control the image output device to output the image laser engraved on the CTP resin relief plate;2. Plate Exposing,Washing and Drying by the flexo plate processor :The CTP resin relief plate is placed in the middle position, the exposure time is set, and the resin at the exposure position is hardened by UV light, then the upper cover 1 is opened, water is poured into the water tank 4 to 2mm above the brush tip, and the water on the green patch is absorbed with absorbent cotton, and the back of the exposed CTP resin relief plate is attached to the green patch with double-sided tape, so that the plate is facing downward, and the plate is washed in the water tank 4 of the plate washing device.After washing, the water on the plate is absorbed with an absorbent sponge, and then the plate is removed from the green patch. The water used for washing the plate is filtered by the water filter device, and sprayed out by the water sprayer 11 above the water filter device after heating.After washing the plate, it is placed in the drying device for drying, and finally placed in the drawer of the post-exposure device 6 for exposure to make a printing plate. Producing and Packing Installation Worldwide FAQ1. What are your main products?Our main products are the Prepress 4up and 8up Online/Offline Thermal CTP, CTCP, VLF CTP and CTCP, FlexoCTP, Processor, Offset Plates, inks, blankets, postpress packing equipments and so on.There are over 3000sets CTPs installed worldwide. Our partners in USA, Canada, Mexico, Colombia, Turkey, Hungary, South Africa and so on are very pleased with our technician support service and product performance.We also have five offset plates production lines producing the thermal CTP plate(single and double layers), positive CTCP plates(single and double layers) and Chemistry free CTP plate.You can get the prepress equipments and consumables all in one and no worry about the after-sales service from our company.2. Where is your factory?Our CTP machine factory is located in Hangzhou city, which is about 1.5 hour by train from Shanghai. You are warmly welcomed to visit our factory!3. What is your warranty for the CTP?Three years' Laser Head and main spare parts for the CTP, one year for the processor.4. What is the Lead Time?Usually 20-30 days, and we will try our best to meet your demands.5. Can you also supply the Workflow and RIP?Yes, we can provide the Workflow Brain New and RIP Compose V9.6. What about the Installation and after-sales technician support?Our engineer can go to help the installation and provide the necessary training. The buyer should take the round air plane tickets and service charge and the local accommodation cost. Any problems or questions, we will be at your disposal 7x24 hours.

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.