Hot Selling Construction Foamed Concrete Block Machine Production Line¹

Product Description    1. AAC Block Machine Line production line introduction     In accordance with different main materials, we can design the production line, which is capable for annually producing 100,000 to 400,000m3 coal ash or sand autoclaved aerated concrete blocks. Here below is the production process of autoclaved aerated concrete block production line.    2. Slurry Making Machine for aac block machineWith the slurry making machine, you can crush and mix the coal ash into the aste type after you have added water.     3.AAC Block Mchine Line Cutting Machine Simple Introduction     The aac block machine line cutting machine is developed based on the traditional cutting machine. It mainly refers to the WIHA technology. Its reducer and control elements are of domestic or international well-known brands, thus ensuring the stability of the machine.Features:  1). The aac block cutting machine utilizes the cylinder to tension the steel wire.Coupled with the frame swinging, the service life of the steel wire is greatly prolonged, and the product accuracy has been greatly improved as well.    2). With the mobile cutting table, the green brick placing and cross-cutting are accomplished at the same position. When the adobe moves downward to the next position, both vertical and horizontal cutting can be completed.    3). As the new chain-type cutting machine, it features high automation, convenient operation, accurate cutting, and short cutting period. With this machine, the production cycle will be greatly shortened and the labor productivity will be significantly improved.      4. AAC Block Machine Line Hydraulic Mould Crane     This hydraulic mould crane is the main corollary equipment in the aerated concrete production. It allows the bricks together with the mould to be placed on the concrete cutting machine for die sinking or demolding. The bricks will be cut by the concrete cutting machine. Meanwhile, the hydraulic mould crane will recombine and clean the concrete mould, bottom plate. Then, it will brush the stripping oil for re-pouring.       5. Autoclave Trolley for AAC block machineThe autoclave trolley is a delivery tool. It can convey the cut brick together with the side plate to or out of the autoclave. This device is adapted to the high-temperature and high-pressure environment. It resists deformation, and no stuck phenomenon appears.       6.AAC Block Machie Line production line detailed product description  1 Product weight is according to 600kg/m3 to control.2 annual capacity 200,000M3.3 set raw material proportion: cement 6.5%, raw lime 23%, flyash 68%, gypsum 3%, aluminum paste powder 350g/M3.4 water and material rate 0.6315 one mould product 2.88M36 Casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes.7 casting slurry temperature 38-42 degree8 body quiet stop. Time is 1.5-2.5housr, temperature 50-90 degree, after quiet stop body strength is 0.15-0.18Mpa9 Steam curing cycle time, come in and out autoclave about 0.5hour, steam curing cycle time about is 6 hours/1.6Mpa, total 6.5 hours.10. Cement lime fly ash style aerated block raw material proportion   11.AAC Block Machine Line Raw material proportion (sand and fly ash) NameUnitCement Lime SandSand%55-65Cement%10-20Lime%20-30Gypsum%2-3Aluminum powder paste(600kg/m3)1/100008Water & material rate 0.65-0.75Casting systemOC35-38Aluminum mixing timeS30-40   nameunitCement lime fly ashflash%65-70cement%6-15lime%18-25gypsum%3-5Aluminum powder paste(600kg/m3)1/100008Water & material rate 0.60-0.65Casting systemOC36-40Aluminum mixing timeS30-40       workshop view             Customer factory and visit                                                 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.