Precast Concrete Wall Machine Sandwich Panel Machine Lightweight Wall Panel/ Board Machine¹

Product Description Product DescriptionAbout Hongfa Concrete Wall Panels Making Machine:Equipped with advanced facilities, Hongfa Group provides solutions of the best panel plant for EPS panel, gysum board, foam cement panel, and precast concrete panel, etc. The annual output can be customized from 50,000 to 1,000,000 m2. What is the EPS Concrete Lightweight Wall Panel?EPS concrete sandwich wall panel is a new type of building material. It is one of the light weight wall panel material with EPS mortar as core material, and the two surface are the skin board made by calcium silicate board or fiber cement board. It is the new type composite EPS concrete lightweight wall panel. This sandwich concrete EPS lightweight wall panel is composed of high strength water resistant calcium silicate board with good waterproof properties and good thermal insulation EPS bonding mortar as core material. Automatic Vertical Wall Panel Machine HFP512AMain features of our wall panel machine:1.Can produce all kinds of hollow and solid panels2.Convenient in setting up and demoulding3.Low labor intensity4.Less worker5.HIgh qualified rate of productsWhat is the materials of our wall panel?(A) Raw Materials1. Good thermal isolation EPS bonding mortar as core material.2. Calcium silicate boards as the surface material: the 2 pcs surface board for outer skin of sandwich wall panel are composed of high strength water resistant, calcium silicate board with good waterproof properties.3. Properly mixed with fly ash, slag and additives.(B) Product size and type (Flexible)Size: Length 2270/ 2440mm(Max.3000mm) | Width 610mmThickness 75 - 250mm (size and thickness can be adjusted).Type: Hollow / Solid / Corner such as L, T shape. What is the advantage of EPS Wall Panel?(C) EPS Panel AdvantagesSolid, lightweight, thin body, high strength, impact resistance, strong Hanging force, heat insulation, sound insulation, fireprevention, waterproof, easy cutting, can be arbitrary slot, without rendering coat, dry decoration, environmental protectionSaving energy, improving energy efficiency.Reducing wall occupying space, increase the rate of using residential space.Reducing structure load and the comprehensive cost, promote building anti-seismic ability and safety performance. How to use the sandwich wall panels?(D) Panels Application*High, multistory building as non-bearing wall, also can be sound insulation, fire partition wall.*Lightweight sandwich panels application is a new breakthrough of the world's wall materials reform, this wall panel have tested by the relevant institutions and its strength, sound insulation, fire resistant, radioactive, water resistance and otherperformance indexes all reach or over the relevant national standards. Product ParametersTypical Layout of the EPS Wall Panel Production LineHow to make wall panels?Process Flow DiagramDifferent Types of Our Light Weight Wall PanelThe data of Vertical Moulding Machine- Manual Type (HFP512A)FunctionMolding system  Weight  5TOverall Dimension2750*2504*1359 mmFinished Wall Panel Dimension 3000/2440*60/75/90/150/200/250 mmOutput/pieces per mould car60 mm58 pcs75 mm50 pcs90 mm42 pcs100 mm40 pcs120 mm34 pcs150 mm28 pcsFactory of the Wall Panel Production LineLand requirements: 2000 to 4000m2 workshop with 9 meters high roof is required for a reasonable size plant however this can change depending on the capacity of the plant. Lot of storage and open space will be needed to store the raw materials and finish products.Water requirements: To produce 1000m2 panels per day we require 20 ton of water only. No special requirements of water quality, ordinary clean water can be used for production.Electricity requirement: Installed power about 150 kw (depending on the capacity).Requirements of Air and Steam: Air compressor 1 set, and 0.5t capacity boiler.Workers requirement: A staff & workers' strength of about 20 is enough to run a 20 mold car plant. Packaging & ShippingThe Wall Panel Making Machine and Production Line Equipment will be well prepared and proper packaged with Plastic Film Wrapping.All process are accordance with international standard, which ensure the machines and equipment in the container are seaworthy. Company Profile    Guangxi Hongfa Heavy Machinery Co.,Ltd is a diversified manufacturer of Construction Materials Machinery and Production Line.We provide complete chain of construction machinery in one-stop. Founded in 1990, covering area of 420,000m2, with a factory buiding of 180,000m2.     Our main products: Concrete block/brick/paving brick making machine and production line, EPS lightweight wall panel production line machine, AAC production line, Artificial quartz slab/stone machine, Terrazzo tile making machine, Concrete pipe making machine, Concrete batching plant, Block machines pallets, etc.    We've provided services and machines, plants&solutions to clients from more than 120 Countries and regions. Such as the USA,Russia, Thailand, Myanmar, Laos, Cambodia, Philippines, Vietnam, India,Indonesia, Pakistan, Bangladesh, Iran, Iraq, Saudi Arabia, Lebanon, Bahrain, South Africa,Botswana, Namibia, Angola, Nigeria, Zambia, Uganda, Mozambique, etc.ContactDo not hesitate to contact with us! Welcome to visit us to see Lightweight Precast Concrete Wall Panel Making Machine, Sandwich Wall Panel Production Line, Fiber Cement Wall Board Machinery running in our factory!Contact UsInternational Trade Dept. : Sales Manager - Alice Wei Guangxi Hongfa Heavy Machinery Co., Ltd.Factory add: Linyi city, Shandong province & Nanning city, Guangxi Province, China 

OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.