CIPDB › China Industry › Manufacturing & Processing Machinery › Building Material Making Machinery
50tpd Small Rotary Kiln for Ceramisite Sand1
Building Material Making MachineryCement Making MachineSmall Rotary KilnCeramisite Sand Rotary Kiln
Zhengzhou Hengxing Heavy Equipment Co., Ltd.
Preview:
Product Description 50tpd Small Rotary Kiln For Ceramisite Sand 1. Introduction of Rotary KilnA rotary kiln is an apparatus that uses a high-temperature heat source to fire raw materials such as cement raw material, limestone, and magnesia that have been loaded into a rotating kiln. Since combustion is easy to control, it can also be used to incinerate noncombustible objects, such as industrial waste and marine life that has greatly varied physical properties that cannot be controlled at other incinerators.2. Controllable heat of Rotary KilnAccording to the exterior, the rotary kilns can be divided into diameter changes rotary kiln and size rotary kiln, into cement rotary kilns, ceramsite sand rotary kilns, soil rotary kilns and lime rotary kilns based on the purposes, into gas powered rotary kiln, coal-fired rotary kiln and mixed fuel rotary kiln depending on the different effects.3. Features of Rotary Kiln1. Advanced structure,2. Stable operation,3. Easy to operate,4. Reliable quality,5. High efficiency and energy saving,6. Safe and environmentally friendly etc.4. Structure of Rotary KilnThe basic components of a rotary kiln are the refractory lined shell, support tyres and rollers, drive gear and burner system. A typical Rotary Kiln is cylindrical shell, slightly inclined from the horizontal and supported on two or more tyres, which in rotate on rollers. One of the tyre is fixed by a set of thrust rollers to take care of the thrust load during kiln movement. The drum assembly along with tyres is rotated by a girth gear/pinion arrangement. 5. Principle of Rotary KilnA ROTARY KILN is a Direct Fired, Refractory Lined equipment for high temperature applications where it is necessary to change the "state" of the material in a continuous process or in batch type process. Since this process usually requires a long residence time, the length to diameter ratio is often in excess of 10:1 in a continuous kiln. In most cases an oil or gas burner fires directly into the discharge end of the unit. The material is heated in three ways - by radiation from the burner flame, conduction from the refractory lining and convection by contact with the hot gases. They are also used for roasting a wide variety of ores. 6. Parameters of Rotary KilnSpecification(m)Kiln dimensionsMotor power(kw)Total weight(t)NoteDiameter(m)Length(m)Obliquity(%)Capacity(t/d)Rotation speed(r/min)Φ2.5×403.250410000.6-3125278Outside disassemble kilnΦ2.5×503603.53000.3-2100310Alumyte-alumina forge kilnΦ2.5×543483.57000.6-3.48100237Outside disassemble kilnΦ2.5×403.250410000.6-3125278Outside disassemble kilnΦ2.7×423453.55000.5-2.4775210.94------Φ2.8×442.8443.54000.437-2.1855201.58Outside disassemble kilnΦ2.8×442.8443.54000.437-2.1855201.58Outside disassemble kilnΦ3.0×452.7423.53200.10-1.5255198.5------ Φ3.0×482.5543.52040.48-1.4555196.29------ Φ3.0×452.7423.53200.10-1.5255198.5------ Φ3.0×602.55032000.62-1.8655187.37------ Φ3.2×502.5403.51800.44-2.4455149.61Kiln with shaftcyclone preheaterΦ3.3×523.3523.513000.266-2.66125283Kiln with preheater precalcineΦ3.5×543.5543.515000.55-3.4220363Kiln with preheater precalcineΦ3.6×703.6703.518000.25-1.25125419Generating kiln for using of the heatΦ4.0×56456423000.41-4.07315456Kiln with preheater precalcineΦ4.0×604603.525000.396-3.96315510Kiln with preheater precalcineΦ4.2×604.260427500.41-4.07375633Kiln with preheater precalcineΦ4.3×604.3603.532000.396-3.96375583Kiln with preheater precalcineΦ4.5×664.5663.540000.41-4.1560710.4Kiln with preheater precalcineΦ4.7×744.774445000.35-4630849Kiln with preheater precalcineΦ4.8×744.874450000.396-3.96630899Kiln with preheater precalcineΦ5.0×74574460000.35-4710944Kiln with preheater precalcineΦ5.6×875.68748000Max4.238001265Kiln with preheater precalcineΦ6.0×95695410000Max5950×21659Kiln with preheater precalcine Zhengzhou HengXing Heavy Equipment Co.,LtdZhengzhou Hengxing is a joint stock corporation integrating scientific research, manufacture, marketing and exporting with the main target at the large and medium sized series of heavy duty equipments for mining, ore selecting, wall materials, formed coal, metallurgy and ect. The company located at Zhengzhou National High-Tech Development Zone.We are specialized in the research, development, and production of industrial crushing, powder grinding, mineral processing equipments and other related devices. These products include Stone Crushers, Jaw Crushers, Cone Crushers, Hammer Crushers, and Sand making Machines, Sand Washing machines, Rod Mills, Powder making Machines, Ore Dressing Machines, Briquette Machines and complete Cement Output Lines. Our products have been sold to areas of Southeast Asia, East Europe, South America, the Middle East and Africa etc, and more foreign markets will be promoted in future.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...