CIPDB › China Industry › Manufacturing & Processing Machinery › Building Material Making Machinery
Waterproof Paper Surface Gypsum Board Making Machine1
Building Material Making MachineryBoard Making MachineGypsum Board MachineGypsum Board Production Machine
Hengshui Decheng Machinery & Equipment Co., Ltd.
Preview:
Product Description DCI company specially designs and manufactures complete sets of building materials equipments, such as paper surface gypsum board production line, gypsum powder production line (natural gypsum and chemical gypsum), fiber cement board production line, calcium silicate board production line, cement production line, AAC block production line, stone production line, etc. Certainly we also supply single machines, spare parts and wearing parts for these production lines; at the same time, we produce some raw materials for the production lines, such as modified starch, foaming agent, glue, etc. DCI company specially designs and manufactures complete sets of building materials equipments, such as paper surface gypsum board production line, gypsum powder production line (natural gypsum and chemical gypsum), fiber cement board production line, calcium silicate board production line, cement production line, AAC block production line, stone production line, etc. Certainly we also supply single machines, spare parts and wearing parts for these production lines; at the same time, we produce some raw materials for the production lines, such as modified starch, foaming agent, glue, etc. Product scheme and quality standard:Product scheme: paper surface gypsum board, in conformity with National standard GB9775-2008 (Please see Annex 1)Standard:8mm-18mmThickness: 1200mm,Width: 2000-4500mmLength: 2000-4500mmVariety: ordinary paper surface gypsum boardFinished product ratio: 95%Notes: After adjusting equipments and formula, the production line can also produce fire-resistant paper surface gypsum board, waterproof paper surface gypsum boardQuality standard (Based on 9.5mm thick gypsum board, see Annex 1 for details)The weight per unit area9.5 kg / m2Longitudinal breaking load≥360/ NewtonHorizontal breaking load≥140/ NewtonWater content of gypsum board after drying≤3%HardnessEdge hardness and end hard ness should be no less than 70N Raw material consumption (Based on 9.5mm thick gypsum board )Gypsum powder(semi-hydrated gypsum CaSO4·1/2H2O)6.8kg/m2Protective paper0.6-0.64kg/m2Gypsum board adhesive0.040kg/m2Foaming agent0.008kg/m2Glue0.005kg/m2Electricity0.3kwh/m2Water4.5-4.8kg/m2Heat consumption∽3800kcal/m2Natural gas (8500 kcal/ m3)0.45 m3 /m2Note: as for fuel, using one of them; when calculating consumption of other fuels, convert with its caloric value and natural gas consumption.Production method of gypsum board production lineCalcined gypsum powder, water and various additives are automatically and separately measured and conveyed into the mixer by continuous auto-conveying system. After well mixed into slurry and spreaded onto the gypsum board protective paper which is continuously moving forward. During the progressing process, the slurry is gradually dispersed with vibration, and jointed with back protective paper.When going through extruded shaping machine, the slurry is fully wrapped by upper and lower paper, pressing into well-regulated flat board which is continuously brought forward as per a stable and strictly controlled speed. After 4 minutes around, the calcined gypsum in the slurry is hydrated again and crystallized into tiny interpenetrative dihydrate gypsum crystal with higher strength. And then, the wet gypsum board with a certain strength and regular shape is precisely cut into individual boards with set size by an auto-controlled cutting system. The individual boards are orderly arranged, turned over by program control system and brought into the dyer. In the dryer, the absorbed water in the boards is evaporated away. following strict drying system(The crystal water in the gypsum crystal has no loss). After brought out from the dryer, the boards are gradually cooled down in the running process. The front sides of every two boards are folded after turned over again, and the two ends are cut into boards with regular size and nice appearance by end sawing machine. At the same time, the two ends of boards are packed by paper strips with fixed label. And finally the boards are conveyed to automatic stacking machine and stacked into well-ordered finished products before put into storage.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...