CIPDB › China Industry › Manufacturing & Processing Machinery › Building Material Making Machinery
2024 New German Technology AAC Production Line/ Automatic AAC Brick Block Making Machine/ China AAC Block Panel Production Line1
Building Material Making MachineryBoard Making MachineAAC Panel MachineAAC Block Making Machine
Guangxi Hongfa Heavy Machinery Co., Ltd.
Preview:
Product Description Product Description AAC (Autoclaved aerated concrete) block Main raw materials of AAC are siliceous material (sand, fly ash and Silicon tailings) and Calcium materials (lime and cement) mixed with foaming agent (aluminum powder). It is the product of light porous silicate through the following processes: batching, mixing, pouring, hardening, cutting, autoclaving and curing etc. Because of large amount of well-distributed tiny pores after foaming, it is named autoclaved aerated concrete.Main Features1. Light weight, can reduce the building's own weight and cost, and help improve the earthquake resistance of buildings2. Good thermal insulation performance and low thermal conductivity3. It has processability. It has the same processability as wood. It can be sawed, planed, drilled and nailed, which is conducive to construction and can be operated on site.4. Strong pressure resistance5. Resistant to high temperature, and the compressive strength of the aerated concrete is slightly increased when the temperature is below 600 °C. When the temperature is around 600 °C, the compressive strength is close to the compressive strength at normal temperature, so The fire performance of aerated concrete for building materials meets national first-class fire protection standards.AAC block pictures and photos What machine produce aac block? as following:Main Process Flow of AAC Block Production Line:1. Dose and match measured raw materials;2. After distributing, feed raw material into pouring mixer to make slurry.3. Through thoroughly mixing, the slurry is poured to mould; ,4. After pre-curing under a certain temperature and time, the block would reach a certain hardness and prepare for cutting;5. Tilting hoister would turn over 90 degrees of mould;6. Then open the mould and separate it from block. And take the block with side plate to the cutting cart;7. The horizontal cutting machine cuts blocks from both sides.8. Then the vertical cutting;9. After cutting, the block is hanged to curing carts with side plate by semi-finished product hoister;10. Grouping the carts and put them into autoclaves;11. Curing the blocks under certain temperature and pressure;12. Carry the finished product out of autoclave by the winch.13. The finished product hoister take the finished product to finished blocks area;14. The side plate return back through side plate roller;15. Side plate would be organized with open mould for the next circle.Detailed Photos 1. AAC Ball Mill: grinding sand to slurry TypeDiameterLengthProductivityFeeeding sizePower(KW)Φ1200x4500mm1200mm4500mm3-4t/h≤20mm55KWΦ1500x5700mm1200mm5700mm6-8t/h≤20mm130KWΦ1830x7000mm1830mm7000mm8-17t/h≤20mm245KWΦ2200x9000mm2200mm9000mm12-70t/h≤20mm380KW2. AAC Slurry Pouring Mixer: To mix t\he standard sand ,slurry,lime,cement and aluminium paste into balance after measuring Mixer typeMotor powerMixer drum volumeBlade diameterBlade speedDiversion drum type30kwV=3.6m3Φ560mm560r/minDiversion drum type37kwV=4.5m3Φ630mm560r/min 3. Mould: storage sand slurry to curingSize of (mm)Size of body(Peeling-off size)Maximum overall sizeLength(mm)Width(mm)Heigth(mm)Length(mm)Width(mm)Heigth(mm)4200x1200x600420012006004720173510784800x1200x600480012006005320173510786000x1200x600600012006006550175010854. Cutting machinea: Horizatal cutting machineSizeMin spacing of wiresRange of swing(mm)Diameter of cutting wire(mm)Overall sizeLength(mm)Width(mm)Height(mm)4.2x1.2x0.6m10mm7.5Φ0.6-Φ1.05200320035604.8x1.2x0.6m10mm7.5Φ0.6-Φ1.05900320035606.0x1.2x0.6m10mm7.5Φ0.6-Φ1.0720032003560b: Vertical cutting machineSizeMin spacing of wiresDiameter of cutting wires(mm)Overall size(mm)diameter of wires(mm)For side trimming(mm)Length(mm)Width(mm)Height(mm)4.2x1.2x0.6m5mmΦ0.6-Φ0.8Φ0.85500286025004.8x1.2x0.6m5mmΦ0.6-Φ0.8Φ0.85500286025006.0x1.2x0.6m5mmΦ0.6-Φ0.8Φ0.86500286025005. AAC Hoist: hoist block mould and groupingsizeLifting capacity(T)Moving speed(m/min)Lifting stoke(mm)Overal sizeLength(mm)Width(mm)Height(mm)4.2x1.2m10t10-40m/min1350-17007700270028504.8x1.2m10t10-40m/min1350-17008300270028506.0x1.2m15t10-40m/min1350-170010500270028506. AAC AutoclaveAutoclave Size(m)Autoclave Volume(m3)Mould size(m)Mould volume(m3)Mould QTY / AutoclaveΦ2.0x3197.34.2x1.2x0.63.02414Φ2.0x26.583.24.2x1.2x0.63.02412Φ2.68x31174.84.8x1.5x0.64.3218Φ2.68x32180.46.0x1.2x0.64.3215Φ2.85x32204.16.0x1.5x0.65.415 Packaging & Shipping AAC block making machine packaging & shipping Our FactoryAAC Components warehouseOur AAC components warehouse is well organized. Different kinds of components are totally keep in order, so our AAC production line can be produced efficiently.Customer plantWe will arrange engineer to customer place installation AAC machinery, trainning workers.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...