IPDB › China Industry › Instruments & Meters › Analysis Instrument
CO2 Controller with Ndir Sensor for Greenhouse and Indoor Plant2
Analysis Instrument, Gas Meter, Gas Analyzer
Kunshan Ast Optoelectronics Co., Ltd
Preview:
Product Description Product DescriptionThe Wall Mount CO2 Controller AGc30, with built-in Dual Beam NDIR technology and Day/Night auto detect sensor, is specially designed to measures CO2 level for greenhouse and ventilation. The AK C30 also helps to extend your measure spot away from the display with 4.5 meters long cable connected to the remote sensor.Its relay output could control the other connected devices, such as CO2 generator to produce in a greenhouse when the CO2 concentration is below to help increase plant yields by supplying CO2 required for photosynthesis.It is perfect used in agricultural applications like greenhouse/ hydroponics rooms, plant factories with both audible and visual alarms.Basic Info.Model NO.AGc30Buzzer Sound80dB @10cmTrademarkOEM/ODMPower SourceAC 100 ~ 240 VACSensor TypeDual-Beam NDIROriginChina KunShanCO2 Range0~5000ppmHS Code9027100090Display TypeLCDProduction Capacity80000 Pieces/YearPhoto CellAuto detect Day/NightTransport PackageCartonSensor Unit Size153*33*27mm (6.0*1.3*1.1inch)Package Type1 pcs/Color BoxControl Unit Size195*145*44mm195 (7.7*5.7*1.7inch)Weight700g ( 24.7oz) Feature:? Dual Beam NDIR (Non-Dispersive-Infrared) technology is used to improve the long term stability.? CO2 controller; Tracer? Built-in Day/Night detect sensor ? Chart with variable time Zoom Levels? Foolproof "Hold Home" function? Good Zone display indicate ? Remote Sensor Product ParametersLCD Display:Trend Chart Zoom:Left table that show the available Zoom Levels for all parameters CO2, as well as the duration of each division for corresponding Zoom Levels:Auto Detect Day/Night:The built-in Photo-Cell sensor can automatically detect whether it is Day or Night. It can override the CO2 control and shut off the CO2 generator by turning off the output power during the night. Conversely, if the Photo-Cell detects light and the CO2 level is low, the device will start the CO2 generator by turning on output power.Output Control: Output power is on when CO2 concentration is over Set Center+(1/2) Set zone, and off when CO2 concentration is below Set Center-(1/2) Set zone. For example, if the Set Center is 1200ppm, and the Set zone is 400ppm, the output power will shut off when CO2 over 1200+(1/2)*(400)=1400ppm, and power on when CO2 below 1200-(1/2)*(400)=1000ppm.Specifications:Typical test conditions, unless otherwise specified: Ambient Temp =23+/-3°C, RH=50%-70%, Altitude=0~100 meterMeasurementSpecificationOperating Temperature32°F to 122°F (0°C to 50°C)Storage Temperature-4°F to 140°F (-20°C to 60°C)Operating & Storage RH0-95%, non-condensingCO2 Measurement Accuracy at 0~3000ppm±50ppm or ±5% of reading, whichever is greaterAccuracy over 3000ppm±7%Repeatability20ppm at 400ppm (standard dev. of 10 readings in 1 minute)Measurement Range0-5000ppmDisplay Resolution1ppm (0-1000); 5ppm (1000-2000); 10ppm (>2000)Temp Dependence±0.2% of reading per °C or ±2ppm per °C, whichever is greater, referenced to 25°C Pressure Dependence0.13% of reading per mmHg (corrected by user's altitude input)Response Time<2min for 63% of step change or <4.6min for 90% step changeWarm-up Time<30 secPower inputAC 100 ~ 240 VACOperating Temperature32°F to 122°F (0°C to 50°C)Storage Temperature-4°F to 140°F (-20°C to 60°C)Operating & Storage RH0-95%, non-condensingCO2 Measurement Accuracy at 0~3000ppm±50ppm or ±5% of reading, whichever is greaterAccuracy over 3000ppm±7%Repeatability20ppm at 400ppm (standard dev. of 10 readings in 1 minute)Measurement Range0-5000ppmDisplay Resolution1ppm (0-1000); 5ppm (1000-2000); 10ppm (>2000)Temp Dependence±0.2% of reading per °C or ±2ppm per °C, whichever is greater, referenced to 25°C Pressure Dependence0.13% of reading per mmHg (corrected by user's altitude input)Response Time<2min for 63% of step change or <4.6min for 90% step changeApplicationYour plants should be greener, and this is because more chlorophyll is present in the leaves with more photosynthesis occurring. As this is happening, your plants are gaining more energy to grow thicker stems and stronger branches, which of course gives a healthier structure. Photo sensor control saves money and energy by ensuring you'll only be supplying CO2 during the light cycle when it is needed.The Day/Night CO2 Monitor & Controller lets you set high and low target CO2 levels. Using advanced hysteresis logic, when CO2 levels get too low, power is supplied to a CO2 generator or regulator via the built-in 100 - 240 VAC 5A piggyback power cord. When the target level is reached, the power is turned off. In addition, the CO2 Monitor & Controller has a built-in photo sensor that overrides the CO2 control and shuts off the CO2 when it senses darkness.Carbon dioxide (CO2) is a colorless, odorless gas. Though carbon dioxide is not toxic itself, the amount found in the indoor environment is used as an indicator for human comfort. Since carbon dioxide is an unavoidable, predictable, and easily measured product of human occupancy, it is used as a marker for whether pollutants introduced from humans or other sources in the building are likely to become a nuisance or a hazard. CO2 is mostly a threat to health when the concentration is high enough to displace the oxygen, which can lead to suffocation in a confined space.When carbon dioxide levels were low, the students' concentration and learning ability were maintained at high levels, and the subjects' performance on the logical thinking test was also outstanding.When brewing wine, CO2 is an important gas measurement indicator. The CO2 controller can help you keep the CO2 gas at an appropriate level.When producing beverages, a CO2 controller can help factories monitor and control the level of CO2 gas to ensure safe production.About UsKUNSHAN AST Optoelectronics CO., LTD designs, develops and manufactures high quality and affordable electronic device.We are ISO 9001 certified ODM/OEM company, we cooperate with many world-renowned brand companies, and our products are sold to many countries and regions around the world and have received high recognition. These countries and regions include the United States, Germany, the United Kingdom, Thailand, Sweden, Argentina, Spain, Indonesia, Vietnam, Japan, Chinese Taiwan, the Netherlands, Australia, New Zealand, Austria, Canada, etc.We have a strong independent research and development team, capable of independently designing products and possessing numerous product patents. We not only provide systematic solutions for various industries but also offer product design and OEM/ODM services to our customers.Our team is committed to the research and development of infrared measurement.Especially in the field of NDIR gas measurement, our team has 15 years of development experience, and professional engineering development experience allows us to continue to receive high praise from customers.Our engineers design our products while keeping the following goals in mind: to ensure the highest level of quality, accuracy, our design team strives to improve the competitive edge of our products to help you develop a broader market.We continue to invest and improve in research and development, automatic calibration equipment, and automatic testing equipment, so that we can better serve and meet the expectations of our global partners. Mutual benefit and win-win with partners.You're always welcome to reach out to us and pick out the products that catch your eye.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.