IPDB › China Industry › Instruments & Meters › Analysis Instrument
Composite Gas Tester Oxygen Nitrogen Analyzer Hydrogen Sulfide Gas Leak Detection Device1
Analysis Instrument, Gas Analyzer, Gas Leakage Detector, Gas Alarm Monitor
Wuhan Kaidi Zhengda Electric Co., Ltd.
Preview:
Product Description Feature of KDZD400Q 4 in 1 Multi Gas Detector:1. Can detect 1~4 gases at the same time.2. Built-in pump-type measurement, integrated water vapor and dust filter, fast response, support long distance.3. 2.31-inch high-definition color screen, display real-time concentration, alarm, time, temperature, humidity, storage, communication, power, charging status, concentration unit, gas molecular formula, gas name and other information.4. Large-capacity data storage function, support multiple storage methods: standard 100,000 data storage capacity, larger capacity can be customized.Support local viewing and deletion of data, and can also upload data to the computer through the USB interface, use the host computer software to analyze data, store and print. Optional RS485 communication.5. High-temperature gas detection (optional). Higher temperature gas detection can be customized.6. Three display modes can be switched: simultaneous display of four gas concentrations, large font cycle display of single-channel gas concentration, real-time curve.7. Graphical display: Reflect the trend of gas concentration changes over a period of time in the form of a curve.8. Data recovery function. You can choose to restore part or all of the data.9. You can set whether to display the maximum value, minimum value, and average value.10. USB charging interface with charging protection function.11. It uses a 4500mA large-capacity rechargeable polymer battery, which can work continuously for a long time.12. High-precision temperature and humidity measurement (optional). At the same time, the sensor is temperature compensated. The instrument uses a temperature range of -40~70 degrees.13. Supports real-time detection or timed detection. When not detecting, the pump can be turned off to extend the startup time.14. Multiple alarm modes, multi-directional three-dimensional indication of the alarm status when alarming: including sound and light alarm, vibration alarm, and visual alarm. Alarm types include: concentration alarm, undervoltage alarm, and fault alarm.15. The alarm value can be set, and multiple alarm modes are set: low alarm, high alarm, interval alarm, and weighted average alarm.16. Misoperation recognition function: Concentration calibration misoperation is automatically recognized and prevented, which can avoid the defects caused by human factors.17. Zero point automatic tracking: Long-term use is not affected by zero point drift.18. Target point multi-level calibration: Ensure the linearity and accuracy of the measurement, and can meet the national standards and local metrology bureau standards at the same time.19. Log record: record calibration log, maintenance log, fault solution countermeasures, sensor life expiration reminder, next concentration calibration time reminder function.20. Meet the requirements of intrinsically safe circuit design, anti-static, anti-electromagnetic interference, pass the national standard test and CMC metrology instrument production license certification21. The protection level reaches IP65, which is splashproof, dustproof, explosion-proof and shockproof.Product Parameters KDZD400Q 4 in 1 Multi Gas DetectorDetection gascomposite gas (carbon monoxide CO, hydrogen sulfide H2S, oxygen O2, combustible gas Ex, etc.)optional: can detect 4 gas concentrations and temperature and humidityDetection range0-1, 10, 100, 1000, 5000, 50000ppm, 100MG/L, 100%LEL, 20%, 50%, 100%Vol optional, refer to the attached table, other ranges can be customizedResolution0.001ppm (0-10ppm high precision) /0.01ppm (0~10 ppm); 0.01ppm (0~100 ppm); 0.1ppm (0~ 1000 ppm); 1ppm (0~5000 ppm and above);0.01MG/L; 0.1%LEL; 0.01%, 0.001%Vol Refer to the attached table, other resolutions can be customizedDetection principleElectrochemistry, catalytic combustion, infrared, thermal conductivity, semiconductor, PID photoionization, etc.Depends on the range, on-site environment and user needsFrequency response range-120 dB ~ +20 dBSensor lifeElectrochemistry 2-3 years, catalytic combustion 2-3 years, infrared 5-10 years, thermal conductivity 2-5 years, semiconductor 2-3 years, PID 2 yearsDetection methodBuilt-in pump suction, flow rate 500 ml/minDisplay mode2.31 inch 320*240 high-definition color screen display, 5 button operationDetection accuracy≤±3%F.S (higher accuracy can be customized)Linearity≤±2%Repeatability≤±2%Alarm modeSound and light alarm, vibration alarm, visual alarm, sound and light + vibration + visual alarm, alarm off optionalResponse timeT90≤20sRecovery time≤30sWorking powerDC3.7VBattery capacity3.7VDC , 4500mA large capacity rechargeable polymer battery, With overcharge, over discharge, overvoltage, overheating, short circuit protection functionUsage environment temperature-40oC~+70oC; relative humidity ≤0-99%RH (built-in filter can be used in high humidity or high dust environment)Sample gas temperature-40oC~+70oC; Optional high temperature sampling cooling filter handle to detect flue gas concentration of 400 degrees or higher temperatureTemperature measurement (optional)-40oC~+120oC Accuracy 0.5oCHumidity measurement (optional)0-100%RH Accuracy 3%RHData storage Standard100,000 data capacity, larger capacity can be customized to support local viewing, deletion or data export, free host computer communication software, storage function defaults to off, can be set to on, storage time interval settingCommunication interfaceUSB (charging and communication), optional RS485 or RS232 communication interfaceInterface languageEnglishProtection levelIP65, dustproof and splashproofDimensions160*70*28mm (L×W×H)Weight300gStandard accessoriesInstructions, certificate, USB charger (including data cable), back clip, humidity dust filter 1, aluminum alloy instrument boxOptional accessories1.2 m retractable sampling handle (1-10 m hose, standard length 1 m), temperature and humidity measurement functionHigh temperature sampling cooling filter handle, high temperature and high humidity pretreatment system, humidity dust filterApplicationsPetroleum, chemical, pharmaceutical, environmental protection, flue gas analysis, air treatment and other occasions where gas concentration needs to be detected Product Description Company Profile
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.