IPDB › China Industry › Instruments & Meters › Analysis Instrument
Ls127c Integrated UV Light Meter for Measuring The Radiation Intensity of UVC Germicidal Lamps Tester Bluetooth Function1
Analysis Instrument, Light Meter, UV Light Meter, UVC Meter
Shenzhen Taijin Precision Instrument Co., Ltd
Preview:
Product Description LS127C Integrated UV Light Meter for Measuring the Radiation Intensity of UVC Germicidal Lamps Tester Bluetooth FunctionProduct DescriptionLS127C 254nm UVC Ultraviolet Radiation Meter | UV Light Intensity Tester for UVC Measurement Descriptions:LS127C radiation detection meter is professionally used to measure the intensity of UVC germicidal lamp, adopting integrated design, easy to operate. LS127C radiation detection meter can monitor the intensity of germicidal lamp radiation in real time while keeping users away from UV radiation damage thanks to its Bluetooth function and WeChat mini program connection. Equipped with a 1 meter test hook, the uvc radiometer can be placed on the hook base, the hook hangs directly below the vertical of the lamp for UV radiometer measurement. Features:1. Professionally used for 254nm germicidal lamp ultraviolet radiation intensity detection.2. Cell phone APP real-time monitoring, away from UV radiation damage.3. Auto shutdown can be set within 1-255 minutes, test data will be saved automatically when shutdown.4. The uvc tester adopts high-precision UVC filters and professional UV sensors to eliminate the influence of UVA and UVB.5. The uvc tester counts real-time power, maximum, minimum, average, energy values and measurement times.6. Provide a 1 meter test hook, it can be placed on hook base, the hook hangs below the vertical lamp for measurement.7. Equipped with PC software to support data export and measurement report printing.SpecitifactionParameterValueSpectral response230nm-280nm,λp = 254nmPower measuring range0 - 20000μW/cm2Power resolution0.1μW/cm2Energy measuring range0 - 9999999 μJ/cm2Relative indication error±8%(relative to NIM standard)Long wave response error60%Cosine characteristics (directional response) error10%Linearity error±1%Short-term instability±1%( 30min after startup)Fatigue characteristicsAttenuation 2%Error of zero±0.1% of full scaleResponse time0.5 secondsRecording time0 - 99999SUnitμW/cm2 (default),mW/cm2,W/m2Bluetooth transmission distance50 meters (open area)Instrument size188.5mm*75.2mm*30.3mmInstrument weightAbout 232 grams (including batteries)Display240*160 dot matrix LCDBattery2 AA alkaline dry batteries Versatile applicationsThe uv dosimeter is widely used in hospitals, disease control centers, pharmaceutical factories, food and drug administration, environmental monitoringstations, etc.Automatic shutdown can be setAuto shutdown can be set within 1-255 minutes, test data will be saved automatically when shutdown.Intelligent statistical measurement dataThe uv dosimeter counts real-time power, maximum value, minimum value, average value, energy value and measurement times with lower uvradiometer price.Provide a 1 meter test hookProvide a 1 meter test hook, it can be placed on hook base, the hook hangs below the vertical lamp for UV radiometer measurement.Advanced digital probeUsing advanced digital probe technology, the probe cannot be easily interfered with and provides excellent test accuracy with lower uv radiometer price.PC software supportEquipped with PC software to support data export and measurement report printing.Packing listNo.DescriptionQuantityUnit1LS127C UV Light Meter1Set2USB cable1Pcs3USB flash disk1Pcs4UV scale hook1Pcs5Silicone Case1Pcs6User manual1Pcs7Certificate/Warranty card1Pcs8 Plastic box1PcsCompany ProfilePackaging & ShippingFAQ1. The difference between LS126A and LS125 UV light meters (UVALED-X0 and UVALED-X1 probe)?The functions of the LS126A UV light meter and the LS125 UV light meter host + UVALED-X0 or UVALED-X1 probe are basically the same. The probe width of LS126A is only 7.2mm, and the diameter of the test hole is 3mm, which is suitable for UV light source detection in a narrow space; the test hole diameter of the UVALED-X0 probe is 10mm, which is suitable for the detection of UV LED plane light sources; the test hole diameter of UVALED-X1 probe is 1mm, it's suitable for the detection of UV LED point light sources. 2. What is the difference between the LS126C UV light meter and other instruments?1. LS126C is equipped with a 1-meter test hook that meets the sterilization requirements of medical institutions as required by national standards.2. LS126C has Bluetooth function and mobile APP, which can monitor data wirelessly at a certain distance to avoid UV damage when viewing data on site. 3.126C can set the timed shutdown time. The measurement data is automatically saved when the machine is turned off. The next time the machine will display the last test result. Unattended measurements can be achieved.4. LS126C UV light meter comes with a real-time clock that traces the specific measurement time of the measurement results.For example, if you test 20 tubes continuously, you can check the specific test time of each tube. 5. LS126C has power graph display function and statistical function. The statistics function can record the real-time value, maximum value, minimum value, average value, measurement duration and test time during the test. The power graph can be used to analyze the luminous intensity after the lamp is lit.6. LS126C UV light meter is equipped with a USB communication port and dedicated PC software. Multiple sets of test data can be exported to an excel form and test reports can be generated for easy archival records. 3. How many values of the ultraviolet germicidal lamp used in hospitals would be up to standard?The "Technical Disinfection Technical Specifications" stipulates that the instrument is placed at a position of 1 m vertically under a 253.7 nm ultraviolet lamp. The irradiation intensity of the new ordinary 30W straight lamp is greater than 100 μW/cm2.The irradiation intensity of the ultraviolet lamp must be greater than 70μW/cm2. Different wattages of UV lamps, the country has different testing standards, 30W straight tube type is the most commonly used. 4. What is the difference of the test results between the LS126C UV light meter and the UV intensity indicator card? 1.The ultraviolet intensity indicator card is irradiated with the ultraviolet germicidal lamp for 1 minute. The color of the ultraviolet light sensitive color block is compared with the standard color block to determine the irradiation intensity of the light tube. The color contrast varies from person to person, especially in the case where the color of the photosensitive color block is not much different from that of the standard color block. Whether the intensity of the ultraviolet lamp is up to standard can only be qualitative, which is very difficult to quantitatively confirm. 2. LS126C UV light meter directly displays the radiation intensity value of the germicidal lamp tube. The measurement accuracy of the instrument is ensured to meet the national metrology institute test standard. 5. Do you offer OEM and ODM service? Yes. We can supply OEM and make customized design for any specific application. 6. How can we guarantee quality? Always a pre-production sample before mass production; Always final Inspection before shipment; 7. What can you buy from us? Colorimeter,Gloss meter,Coating thickness meter,window tint meter,UV meter, Leeb hardness tester, Ultrasonic thickness gauge. 8. What services can we provide? Accepted Delivery Terms: EXW,DAP;Accepted Payment Currency:USD,CNY; Accepted Payment Type: T/T,Western Union; Language Spoken: English, Chinese, Spanish, Japanese, Portuguese, German, French, Russian, Korean, Italian. 10. Does the instrument have a warranty?Guarantee period is 12 months, after the warranty, we also provide life-long paid or service.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.