IPDB › China Industry › Instruments & Meters › Analysis Instrument
Boqu pH-8022 Power Plants Manufacturer Water pH Probe USB pH Sensor1
Analysis Instrument, pH Meter, Hanna pH Probe, Care of pH Meter
Shanghai Boqu Instrument Co., Ltd.
Preview:
Product Description Power generation boilers use fuels such as coal, oil or natural gas to hear water and therefore produce steam, which is in turn used to drive turbine generators. The economics of power generation rely to a great extent on the efficiency of the fuel to heat conversion process and therefore the power generation industry are amongst the most advanced users of efficiency techniques based on on-line process analysis. STEAM & WATER ANALYSIS SYSTEM are used in power plants and in those industrial processes where it is needed to CONTROL AND MONITOR WATER QUALITY. In power plants it is needed to control the water/steam cycle characteristics in order to avoid damage to the components of the circuit as the steam turbine and the boilers.Within the power station the aim of water and steam control is to minimize contamination of circuit, thereby reducing corrosion as well as cutting down the risk of the formation of harmful impurities. Therefore it is very important to control the quality of water to prevent the deposits on turbine blades by Silica (SiO2), reduce corrosion by dissolved oxygen (DO) or to prevent acid corrosion by Hydrazine (N2H4). Measurement of water conductivity gives an excellent initial indication of falling water quality, analysis of Chlorine (Cl2), Ozone (O3) and Chloride (Cl) used for control of cooling water disinfecting, indication of corrosion and detection of cooling water leaks in the condense stage.Detailed PhotosWhat's the technical specification of Manufacturer water ph probe usb ph sensor?PHG-2081X pH MeterMeasuring range: 0-14pHTemperature range:0-60oCCompressive strength:0.3MPaSlope: ≥96%Zero point potential: E0=7PH±0.3Internal impedance: 150-250 MΩ (25oC)Profile: 3-in-1Electrode (Integrating the temperature compensation and the solution grounding)Installation size: Upper and Lower 3/4NPT Pipe ThreadConnection: Low-noise cable goes out directly.Application: Applicable to various industrial sewages, environmental protection and water treatment.What's the technical specification of Online Conductivity Meter? DDG-2080X Conductivity MeterMeasuring range:0.00uS-2000 ms/cmResolution:0.01Accuracy:±1%F.S.Temp. compensation:Pt 1000/NTC30KTemp. compensation range:-10.0 to +130.0oCTemp. Resolution and accracy:0.1oC,±0.2oCStorage temp.:-20 to +70oCDisplay:Back light, dot matrixEC current output1:Isolated, 4 to 20mA output , max. load 500ΩTemp. current output 2:Isolated, 4 to 20mA output , max. load 500ΩRS485:Mod bus RTU protocolBaud rate:9600/19200/38400Maximum relay contacts capacity:5A/250VAC,5A/30VDCCleaning setting ON: 1 to 1000 seconds, OFF: 0.1 to 1000.0 hoursOne multi function relay:clean/period alarm/error alarm What's the technical specification of Online Dissolved Oxygen Meter?DOG-2082X Dissolved Oxygen MeterMeasuring range:0-100ug/L,0~200ug/L, 0-20mg/LElectrode material:316L stainless steelTemperature resistor:2.252K 22K Ptl00 Ptl000 etcSensor life:>3 yearsCable length:5m (double shielded)Detection lower Limit:0.1ug/L(ppb)(20oC)Measurement upper limit:20mg/l(ppm)Response time:≤3min(90%, 20oC)Polarization time:>8hMinimum flow rate 5cm/s; 515 L/hDrift:<3%/monthMeasurement error <±1 ppbAir current:50-80nA Note: Maximum current 20-25 uAPolarization voltage:0.7VZero Oxygen<5ppb(60min)Calibration intervals>60 daysMeasured water temperature :0~60oCWhat's the technical specification of Online Silicate Analyzer/Phosphate Analyzer/Sodium Meter?GCSG-5089 PROLSGG-5090 PRODWG-5088 PRO1. Measuring range: 0~20ug/L, 0~100ug/L, 0-2000ug/L;0~100mg/L2.Accuracy: ± 1% F.S3. Repeatability: ± 1% F.S4. Stability: Drift ≤ ± 1% F.S / 24hours5. Response time: the initial response is 12 minutes6. Sampling period: about 10 minutes / Channel7. Watery conditions: Flow:> 100 ml / min Temperature: 10 ~ 45 oC Pressure: 10 kPa ~ 100 kPa8.Environmental conditions: Temperature: 5 ~ 45 oC, Humidity: <85% RH9. Reagent consumption: Three kinds reagents, about 3 liters / month for each kind.10.Current output: 4 ~ 20mA arbitrarily set within this range, multi-channel meter, channel independent output11. Alarm output: normally open relay contacts 220V/1A12. Power supply: AC220V ± 10% 50HZ13. Power consumption: ≈ 50W14. Dimensions: 720mm (height) × 460mm (width) × 300mm (depth)15. Hole size: 665mm × 405mm1.Measuring principle: phosphorus molybdenum alum yellow photoelectric colorimetry2. Measuring range: 0 ~ 2000μg / L, 0 ~ 10mg / L,0~50mg /L optional3. Accuracy: ± 1% F.S4. Repeatability: ± 1% F.S5. Stability: drift ≤ ± 1% F.S/24 hour6. Response time: initial response, four minutes, six minutes to reach at least 98%7. Sampling period: 3 minutes / Channel8. Watery conditions: Flow> 2 ml / sec.Temperature: 10 ~ 45 oCPressure: 10kPa ~ 100kPa9. Ambient temperature: 5 ~ 45 oC (higher than 40 oC, reduced accuracy)10. Environment humidity: <85% RH11. Reagent types: one kind12. Reagent consumption: about 3 liters / month13. Output signal: 0 ~ 22mA within range of any set, each channel isolation14. Alarm: buzzer, relay normally open contacts15. Power: 220V ± 10%, 50Hz ± 1% 50W Main features16. Dimensions: 720mm (hight) × 460mm (width) × 300mm (depth)17. Hole size: 665mm × 405mm1.Measuring range : 0 ~ 100ug / L, 0 ~ 23000mg /LResolution : 0.1 μg / L, 0.01mg/L0.00pNa-8.00pNaResolution : 0.01pNa0 ~ 60 oC Resolution : 0.1 oC2.The basic error : ± 2.5%, ± 0.3 oC temperature3.Automatic temperature compensation range : 0 ~ 60 oC, 25 oC basis4.The electronic unit temperature compensation error : ± 2.5%5.The electronic unit repeatability error : ± 2.5% of reading6. Stability: reading ± 2.5% / 24h7.The input current : ≤ 2 x 10-12A Tested water samples : 0 ~ 60 oC, 0.3MPa8.The clock accuracy: ± 1 minute / month9.The output current error : ≤ ± 1% FS10.Data storage Quantity: 1 month ( 1:00 / 5 minutes )11.Alarm normally open contacts : AC 250V, 7A12.Power supply : AC220V ± 10%, 50 ± 1Hz13.Isolated output : 0 ~ 10mA ( load <1.5kΩ), 4 ~ 20mA ( load <750Ω)14.Dimensions: 440 ( W) * 770 (H ) * 234 (D ) mm, hole size: 390 ( W ) * 650 ( H) mmPositioning holes : 280 ( W ) * 730 (H ) mm, pore size : ￠ 12, four-hole distributionAlarming relay: AC220V, 3A, isolated output of alarming signals15.Working conditions: ambient temperature: 0-60oC; relative humidity <85% BOQU Contact Industrial ApplicatonsMainly Application of Best Water Treatment For Power PlantIn today's world, our earth faces many environmental problems, especially in water quality. As a leading manufacturer in water quality analyzers, BOQU Instrument will use all technologies to solve problems related to human and earth survival and always to be the guardians of the earth's water quality. BOQU Instrument's online water quality analyzer is mainly used to test pH, conductivity, TDS, dissolved oxygen, turbidity, residual chlorine, suspended solids,TSS, ammonia, water hardness, silica, phosphate, sodium, BOD, COD,Ammonia nitrogen ,total nitrogen,chloride,lead ,iron,nickel,fluoride,copper,zinc etc. mainly application for Agriculture,Food and Beverages,Water Analysis,Healthcare and Pharmaceutical,Paints and Dyestuff Industry,Cosmetics, Flavors and Fragrances,Electroplating Industry.Company ProfileBOQU Instrument focuses on technological innovation in water quality analyzers and water quality sensors since founded at 2007. now staff is over 200 people and with an annual growth rate of 35%. we have own R & D center,many senior engineers has over 10 years R&D experience..Now BOQU has got more than 50 technical certificates for controller software and over 20 technical patents,therefore we won the National High-tech Enterprise Certificate in 2010.At present, the annual quantity of water quality sensors and meters is over 100,000pcs, it let BOQU instrument become the biggest factory in water quality analyzers in Shanghai China.BOQU ExhibitionThe BOQU Instrument is a young, energetic and professional team. We will continue to focus on R&D and manufacturing of high-end water quality monitoring instruments and sensors.we keep to create benefits for our customers,We work hard for the material and spiritual aspects of all employees,and contribute to the progress and development of humanity. forever to guard the earth's water quality.CertificationsBOQU Instruments is very popular in all global market, because BOQU Water quality anaysis instrument and sensors got most international certicates. As a responsible and high-tech enterprise in China,BOQU Instrument thinks there is still long way to go,so our production is strictly according to ISO9001 from source of raw material to finished instrument. And their is professional staff and test instrument to check each process.now our many instruments have reached or exceeded the world-class level. BOQU instrument also got many certificates such as CE, SGS,FCC and so on.Visit CustomersIn order to provide better service for our customers, we will visit customers in different countries.Only in this way,then we could truly understand customer needs and help customers to choose right water quality analyzers and sensors.FAQFAQ of Manufacturer water ph probe usb ph sensorer1.What is Water quality monitoring Power plant industrial boiler?Water is one of the most important natural resources in industrial production. In power plant production, water is also a medium. In the specific power process, water is needed to transfer heat and power. If the water in the boiler contains excessive impurities, impurities will deposit at the bottom of the boiler, resulting in uneven heating. If the water quality of the boiler can not be treated for a long time, it will also cause certain damage to the boiler, affecting the service life of the boiler. In serious cases, corrosion, scaling and bulging of the boiler also need to occur. The explosion accident was caused by some problems. If the water quality contains a large amount of calcium and magnesium ions, impurities will continue to concentrate and evaporate in the boiler, resulting in scales accumulated at the bottom of the boiler, affecting heat transfer efficiency, resulting in a large number of unnecessary fuel consumption. Therefore, the quality of boiler water has a very important impact on the economy of power enterprise production and greenhouse gas emissions.the water for boiler we classify hard water and soft water in power plant.2.What is Effect and Characteristics of Hard Water into BoilerHard water refers to the hardness of relatively small, hard water contains a large number of sodium ions, magnesium ions and calcium ions. These impurities are continuously concentrated, evaporated and heated in the boiler. Ions in the boiler water tend to be saturated in the process of changing the depth of salts. The solid matter produced is mainly calcium carbonate. When calcium carbonate accumulates for a long time, a large amount of heat will be concentrated at the bottom of the boiler, which may cause the boiler explosion. This requires the power plant staff to strengthen the cleaning and maintenance of the boiler in their daily work, but also to use various means to reduce the hardness of water.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.