IPDB › China Industry › Instruments & Meters › Analysis Instrument
Near Infrared Non-Contact Online Moisture Meter Measurement Instrument1
Analysis Instrument, Moisture Meter, Moisture Measuring Meter, Moisture Measuring Instrument
EBPu Electromechanical Equipment (Zhejiang) Co., Ltd.
Preview:
Product Description Near Infrared Non-contact Online Moisture Meter Measurement Instrument Features:1. Near-infrared non-contact test, Real-time display of moisture content changes on the production line, no need for pre-processing of samples, samples in closed spaces can also be tested by penetrating colorless glass (light transmittance greater than 95%) , which ensure the integrity of the samples and meet the requirements of the test environment.2. The instrument is easy to operate. After being installed at the location where the test is required, samples are taken near the test point to test the moisture content using the laboratory standard method. Only the standard test data and instrument data need to be compared, and the translation amount and sensitivity parameters can be adjusted to complete the calibration and start running.3. Strong anti-interference ability, the probe has the function of automatically compensating for temperature effects, and changes in ambient temperature basically do not affect the measurement accuracy; the instrument performance is not affected by changes in various ambient light, and there is no need to install a light shield on the probe when using it; the sintered filter element dust cover is standard, and the interference of trace dust and water vapor can be eliminated by connecting the air source.4. The probe has a built-in MCU and adopts full digital computing. It has strong optical signal processing capabilities and a higher ability to judge light-absorbing materials such as black. At the same time, the visible light signal measurement is added, which significantly reduces the impact of color changes and has a stronger adaptability to complex test sites.5. Diverse input and output interfaces, free protocol/MODBUS-RTU (read and write, support remote parameter modification and calibration); RS485 (three channels), DC4-20MA (one channel), IO input and output, 2-channel input, input shutdown signal to stop measurement, 2-channel 24v output, alarm lights can be installed.6. Stable and reliable, using waterproof power supply module, aluminum alloy shell, IP67 grade, AC 90-220V 50/60hz global voltage adaptation. The probe power supply is DC24V, low-voltage power supply is safer, more stable, and effectively reduces the failure rate. The light source power supply is DC5V stabilized voltage, the voltage rises slowly when the power is on, and the light source is protected when the machine is turned on and off.Product ParametersParameters:ModelSY-300HWApplicable materialsuniform moisture content, uninterrupted materialsProbe glasshigh-bay quartz glass to avoid stains and water vapor adhesion.Measurement range0-90% (the max. measurement range is when the material absorbs water saturation, for example: paper can reach 50%, steel sintering is about 18%, pure metal powder cannot absorb water and cannot be measured)Measurement accuracy0<water content ≤1%, Q≤±0.1%; 1%<water content ≤15%, Q≤±0.2%; 15%<water content ≤30%; Q≤±0.5%; (the corresponding measurement accuracy can only be achieved when the material composition is the same)Resolution:Resolution: 0.1/0.01/0.001 (optional)Display content ther status)5-digit digital tube, 4 buttons, 8 status lights (direct judgment of probe communication and other status)Spot diameter50mm (varies with distance)Measurement speed0.125 seconds (after stabilization)Detectorpackaged with filter to avoid external light interferenceCalibration and adjustmentQuick calibration, pre-calibration, no need for daily re-calibrationSignal outputRS485, 4-20mA analog signalCommunication protocolFree protocol/MODBUS-RTU (read and write, support remote parameter modification and calibration); RS485 three-wayNumber of channels50Working temperature-10oC-50oCWorking distanceWorking distance 250mm-450mmWorking power supply Waterproof power supply moduleAC 90-220V 50/60hz global voltage adaptation, output DC 24VDust and steam (trace)Standard sintered filter dust cover (air source self-provided)IP levelIP67Equipment weight6kg; host: 4kgMounting bracketCustomized according to working conditions, installation round pipe diameter 25-32mmComany Profile & Certificates
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.