IPDB › China Industry › Instruments & Meters › Analysis Instrument
Sulfur Hexafluoride Multifunctional Analysis Equipment Sf6 Gas Purity Test Set2
Analysis Instrument, Gas Analyzer, Sf6 Gas Test Set, Sf6 Purity Test Set
Huazheng Electric Manufacturing (Baoding) Co., Ltd.
Preview:
Product Description Sulfur Hexafluoride Multifunctional Analysis Equipment SF6 Gas Purity Test Set Technical parameter1)Measurement range: 0 ~ 100% (SF6 percentage)2)Measurement accuracy: ± 0.1 oC (within 90% ~ 100% range)3)Resolution: 0.01%4)Sampling flow: 0.5 ~ 0.8l/min5)Response time: 15s (90%)6)Sampling system: built in pressure stabilizing valve, filter and electronic flowmeter7)Display mode: color touch screen display, all Chinese interface, with backlight8)Output interface: USB2.0 specification9)Power supply: built in rechargeable lithium battery (with charging protection device), which can work continuously for 10 hours10)Size: 320 (mm) × 270(mm) × 140(mm)11)Operating temperature: - 40 oC ~ + 80 oC Operation steps1. Start up and warm up for ten minutes. This process can eliminate the influence of ambient temperature on the test results.2. Connecting SF6 equipmenta) Connect the threaded end of the measuring pipe with the switch connector and tighten it with a wrench;b) Then insert one end of the quick connector on the test pipe into the sampling port on the purity instrument - < gas inlet >;c) Connect the exhaust pipe to the air outlet - < gas outlet >.3. Check the powerWhen using DC power, please check the battery power displayed in the upper right corner. If the power is less than about 20%, please turn off and continue to use after charging.4. Start measurementFirst, open the meter to measure the needle valve on the pipe, then adjust the flow valve on the panel of the purity tester, adjust the flow to about 0.5L/M, and start measuring the purity value of the SF6 gas.5. Store dataAfter the equipment measurement is completed, the data can be saved in the instrument, and press the "data query" key to call out the operation menu.6. Measuring other equipmentAfter one equipment is measured, close the needle valve on the measuring pipeline and the regulating valve on the purity instrument. Remove the adapter from the SF6 Electrical equipment. If it is necessary to continue to measure other equipment, continue to measure the next equipment according to the above steps.7. End of measurementAfter the measurement of all equipment, turn off the power supply of the purity instrument. Company InformationHuaZheng Electric Manufacturing (Baoding) Co.,Ltd is the supplier of the State Grid in China.It means we are the supplier of the Chinese Government.And our products spread throughout the whole China.What's more, our customers come from different countries like America, England, Bulgaria, Brazil, Chile, Malysia, Vietnam and so on.Our main products are Insulation Oil Tester, Cable Fault Locator, Power Quality Analyzer, High Voltage Generator, High Voltage Capacitor, Testing Transformer and so on.Customer VisitExhibitionSimilar Recommendation
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.