IPDB › China Industry › Instruments & Meters › Analysis Instrument
Quality Portable Emission Gas Analyzer Vehicle Exhaust 5 Gas Analyzer1
Analysis Instrument, Gas Analyzer, 4 in 1 Multifunction Gas Detector, Multifunction Gas Detector
Xi'an Lonn M&E Equipment Co., Ltd.
Preview:
Product Description Quality Portable Emission Gas Analyzer Vehicle Exhaust 5 Gas AnalyzerPump-suction portable gas detection and alarm instrument is an intelligent high-performance detection instrument which can continuously monitor a variety of gases (VOC, TVOC, combustible gases and toxic and harmful gases) and has the function of personnel fall alarm. The instrument uses more than 30 kinds of plug-and-play intelligent sensors, including imported PID light ion sensor, electrochemical poison gas sensor, oxygen sensor, catalytic combustion sensor and infrared flammable gas sensor, CO2 sensor, CH4 sensor. It can detect 1-4 kinds of poisonous and harmful gases at the same time. The sensor can be flexibly configured in any combination to meet the analysis and detection needs of different industries.The wireless function of the instrument enables the security personnel to acquire the instrument data and alarm status in real time anywhere. Visual data display, 2.3 inch full-color large screen, faster response speed, strong wear-resistant shell design will improve staff safety protection to a new level.Product ShowStructure and AdvantageParametersProduct modelPump-suction portable gas detection and alarm instrumentSupporting SensorsElectrochemical sensor, infrared sensor, PID Photoion sensor, catalytic combustion sensor arbitrary combination, flexible configuration; built-in temperature and humidity sensor, real-time display of environmental temperature and humidityCombination modeTwo-in-one,Three in one,Four in one option(There must be a combustible gas sensor in the four-in-one system),Sensors with two-in-one or more configurations can be opened or closed independently to avoid gas interference and prolong the service life of sensors.Sampling modeActive pump-suction type, built-in air pump can be opened or closedindependently, and the flow rate of air pump is 500 ml/min.Indication error≤±3% FS(Higher accuracy required according to sensor performance)Repeatability≤±1%Zero drift≤±1%(FS/Y)Response time≤20 S(T90),(Higher requirements depend on sensor performance)Recovery time≤30 S(Higher requirements depend on sensor performance)Size80 mm long * 200 mm high * 58 mm wideShell materialHigh Strength Wear Resistant Polycarbonate Shell + Stainless SteelWeight0.52kgBatteryLarge capacity rechargeable lithium battery 6000 mAh, single gas continuous working time is more than 30 hours, four-in-one gas working time is more than 24 hours, charging time is less than 7 hours, supporting mobile power supply and charging.ChargerUSB High Current 5V 2.1A Fast ChargerAlarm modeSound alarm 95 dB@30 cm, vibration alarm, red LED alarm lamp, personnel fall alarm; short-distance wireless and long-distance GPRS wireless alarm transmission mode(optional)Alarm point settingA1 alarm value and A2 alarm value; TWA alarm value, STEL alarm value and low concentration alarm value can be set separately.Display2.3 inch TFT colour screenBacklightManual, automatic alarmKey7-Key navigation keyDirect readingMeasurement value, data recording status, pump working status, ambient temperature and humidity, maximum, minimum and average valueData recordAutomatic storage of data, customizable storage interval, continuous storage of 300,000 sets of data and time data, the selection of micro TF storage card,can store more than 10 million sets of dataData transmissionSupport USB measurement data download and transmission; support GPRS wireless transmission or short-distance RTU433 wireless transmission (optional)Data printingSupporting Bluetooth Wireless Printing for Micro Portable Data Printer (Optional)CalibrationThe target point calibration function of level 2 to 4 or above can set the calibration value and zero with one key.Ex-markExd II CT4 Gb(Intrinsically safe)Protection levelIP65Operation modeUser mode and administrator mode are optionalWorking temperature-20oC - 50oCWorking humidity0-95% Relative humidity (non-condensation)Company Information1. Xi'an Lonn M&E Equipment Co., Ltd. is a professional supplier of measuring equipment.2. We have professional and qualified factory, our factory is ISO certified and our products are CE, CPA,CMC,CNEX standard.3. We always manufacture according to order, we can also source products for our customers on request.4. We offer unlimited customer support via phone or email as long as you have any problems with our products,please feel free to write to us, we will reply with 48 hours.CertificationsPayment and TransportationExport CountriesFAQQ1. Why choose LONN?LONN's mission: Help our clients achieve success.LONN's prosbective: Intelligentized the industrial measurement.Q2. Does your product can pass CE and ROHS?Yes. Please do not worry.Q3. Can you ship goods with battery by DHL? Yes. We always use DHL ship battery goods.Q4. Is OEM and ODM service avilible?Yes. We supply fiexible experience of OEM&ODM service.Q5. How do you ensure good product quality?We have a complete quality control system, all products have been thoroughly tested after production.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.