IPDB › China Industry › Instruments & Meters › Analysis Instrument
Electromagnetic Vibratory Sieve Shaker Vibrating Sieve Analyzer Screen Separator1
Analysis Instrument, Sample Processor, Electromagnetic Screen Separator, Vibrating Screen Analyzer
Wuxi Serve Real Technology Co., Ltd.
Preview:
Product Description Product DescriptionThe electromagnetic vibrating sieve is suitable for the screening and classification of powder particles in the laboratory. The equipment complies with a number of national standards, is equipped with automatic weighing, calculation and analysis software, and can generate particle size distribution curves. Supports a wide range of screen configurations, up to 6 kg sample load, and features both batch and continuous sieving modes. Its intuitive user interface and efficient performance help increase laboratory productivity. It is widely used in a wide range of fields, including pharmaceutical, chemical, education and scientific research, etc.The particles in the sieve are thrown up and screened again, which will vibrate at a frequency of 3000-6000 times/minute, so that the sieved sample can be uniformly distributed throughout the screen for reciprocating three-dimensional throwing motion. The electromagnetic vibrating sieve has the characteristics of high efficiency, high load and high separation accuracy. The sieve is equipped with software free of charge, which can be connected to the computer and balance, and can automatically weigh and calculate the entire screening experimental process. Automatic analysis and evaluation of the screening results of all levels of sieve layers. And the particle size distribution of each sieve layer can be generated into a particle size distribution curve, which can be referenced with the analysis results of the laser particle size analyzer, and the sieving experimental results can be saved and exported indefinitely. Features1. Conform to the national standard GN/T6003.1-1997, GB/T6003.2-1997 standard, and comply with the provisions of Ph.Eur.2.9.38 of the European Pharmacopoeia2. Each group of standard sieves has an inspection certificate, and the sieve holes are monitored with standard testing instruments3. Equipped with free sieve analysis software, the whole process of sieving can be automatically weighed, calculated, analyzed, and evaluated4. The software can generate the particle size distribution curve of each level of sieve layer5. The test results can be exported or electronically saved6. With electromagnetic drive as the sieving power, the three-dimensional throwing sieving motion mode is realized, so that the sample is more evenly distributed on the surface of the screen, and the pass rate and sieving accuracy of the sample are improved.7. Duplex disc cover design, can quickly replace the standard sieve8. There are two ways of continuous and intermittent sieving to cope with the sieving experiments of different samples9. The visible transparent top cover and visible transparent spacer can observe the positive screening process10.The 8-inch color touch screen is easy to operate, and the screening data is clear at a glance11. The storage, printing and saving of the two paths can be on the host computer or on the computer12. Comparable and reproducible screening results can be carried out in the industry13. It can reduce the labor intensity of laboratory operators and improve work efficiency Product Parameters1. Measuring range dry method: 20 microns to 25 mm,2. It can be equipped with standard screens of different materials with diameter: 203mm or less.3. Sieve tower level: 5cm high standard screen can be equipped with 12 grades, 2.5cm high standard screen can be equipped with 24 grades.4. Screen configuration: can be equipped with many types of screen options, including (diameter/height)5. Maximum sample load: 6 kg6. Sieve tower height: about 560mm7. Instrument size: 520*350*200mm8. Weight: 30kg9. Vibration frequency: 3000 to 6000 times/min10. Power supply: 220V/110V 350W 50Hz/60Hz11. Control mode: touch screen control12. Screening setting: intermittent, continuous, timed.13. Software configuration: It can automatically analyze the sieving allowance at all levels, the cumulative sieving surplus, the grading sieving surplus, the pass rate, the cumulative pass rate, the percentage of the loss rate, and automatically generate the particle size distribution curve.1. Power supply: 220v50HZ2. Weight: 18kg3. Size: 30*54*26cm The door opening height is 80cm4. Vibration speed: 3600 times/min5. Highest sieve level: 6 standard sieves can be superimposed at the same time for simultaneous screening6. Vertical tapping: Yes, intermittent tapping mode can be set7. Particle size range: 5 microns-4.75mm8. Adjustable frequency: 2HZ-300HZ9. Time: 1-99.99 set as needed10. Maximum sieving capacity: 10 grams11. Minimum sieving weight: 0.1 grams12. Standard sieve specification: 75Application1.Sieving and grading of solid powder particles in the laboratory: raw material API, preparation granules, excipients, sand, flour, plant seeds, metal powders, fertilizers, plastic granules, minerals, laundry detergents, building materials, coffee, etc.2.Laboratories and research institutes of colleges and universities.Detailed PhotosCompany ProfileWho we areWe are professional manufacturer & supplier specialized in Civil Engineering & Material testing equipments since 2003. We can supply various kinds of testing equipments that complies to the following standards ASTM/AASHTO, ISO, EN, DIN JIS, as well as other specialized industry standards. Meanwhile we are authorized oversea market distributer of some famous China testing equipments manufacturer. Our customers come from 6 Continents with more than 90 countries & area since company has been established.Our advantages1. Quality assurance--We aim to long term cooperation with every of our customer2. Reasonable price -- we believe only reasonable price can guarantee reliable quality & service3. Wide range products--we not only sale own products but also acting products of mulity famous China manufacturers, time saving, easier process, better quality & price, guaranteed service.4. After-sales service guaranteed--all sold products enjoy 12 months warranty period since products claimed, free spare parts (the transportation cost payment depends on the weight & destination).5. Fast response & professionalism-- 7/24 response either on sales inquiry or after-sales service, Monday to Friday response within 2 hours, weekend response within 6hours.6. Multi payment modes--Wire transfer (T/T), Paypal (credit card), Western Union, L/C.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.