IPDB › China Industry › Instruments & Meters › Analysis Instrument
Infitek Multi-Parameter Water Quality Meter/ Multi-Parameter Analyzer CE FDA Certified1
Analysis Instrument, Liquid Analyzer, Multi-Parameter Analyzer, Multiparameter Meters
Infitek Co., Ltd.
Preview:
Product Description Infitek CE FDA Approved Multi-parameter Water quality Meter/ Multi-parameter AnalyzerFeaturesThe BEP-M500A Benchtop Multi-parameter Analyzer adopts a multi-purpose measurement method, which is suitable for the fields of health disease control, environmental protection, biological agriculture and forestry, water quality analysis, scientific research and institutions of higher learning.General FeaturesColor High contrast LCD touchscreen, 7.0 inches.Intelligent operation system provides features including user management, calibration management, method management, data management and etc.Multi-reading feature allows auto-read, timed-read and continuous-read.Automatic/Manual temperature compensation ensures accurate results.Data Storage1000 sets for each parameter (GLP-compliant).Data analysis feature helps user review, compare and recalculate results.Support for USB and RS-232 communication.Reset feature automatically resumes all settings back to factory default options.IP54 waterproof.pH1-6 points calibration with Standard Recognition.Selectable pH buffer groups, including DIN, NIST, USA, MERK, JIS, GB.Support for pH standard group customization.Automatic electrode diagnosis with pH slope and offset display.Ion1-6 points calibrationSelectable measurement unit, including μg/L, mg/L, g/L, mmol/L, pX, ppm, etc.Multi-measurement modes are supported, including Direct Reading mode, Standard Addition mode, Sample Addition mode and GRAN mode.Over 10 methods are built-in, including F-, Cl-, Br-, I-, NO3-, BF4-, NH4+, K+, Na+, Ca2+, Cu2+, Pb2+, Ag+and etc., user-defined method is supported.Conductivity1-5 points calibration with Standard Recognition.Settable parameters, including cell constant, reference temperature (5/10/15/18/20/25°C), temperature compensation coefficient and TDS factor.Temperature compensation type (none, linear, pure water). SpecificationModelBEP-M500AParameterspH/EC/ISE/Temp. (mV/ORP/pX/Resistivity/TDS/Sal.)pHRange-2.000 to 20.000 pHResolution0.1, 0.01, 0.001pHAccuracy±0.002 pHCalibration PointsUp to 6Standard CustomizationYesCalibration ReminderYesStandard RecognitionNIST, GB, DIN, USA, MERK, JIS buffersSlope LimitYesmV/ORPRange-2000.00 to 2000.00 mVResolution0.1, 0.01 mVAccuracy±0.1 mV or ±0.03% ofreading whichever is greaterEH ORP ModeYesORP Calibration Points1 custom point (relative mV)pXRange-2.000 to 20.000 pXResolution0.1, 0.01, 0.001 pXAccuracy±0.002 pXCalibration PointsUp to 6ISERange1E-9 to 9.999E9Unitsmol/L, mmol/L, g/L, mg/L, μg/L, ppmResolutionUp to 4 significant digitsAccuracy±0.3%Calibration PointsUp to 6ConductivityRange0.000 μS/cm to 2000 mS/cmResolution0.001 μS/cm minimum,various with range selectionAccuracy±0.5% FSReference Temperature5, 10, 15, 18, 20, 25 oCCalibration PointsUp to 5Calibration ReminderYesStandard Recognition10μS/cm, 84μS/cm, 500μS/cm, 1413μS/cm, 12.88mS/cmResistivityRange5.00 Ω·cm~100.00 MΩ·cmResolution0.01 Ω·cm minimumAccuracy±0.5% FSTDSRange0.000~1000pptResolution0.001ppm minimum, changed with rangeAccuracy±0.5%SalinityTypeNaClRange0.0~80.0pptResolution0.1pptAccuracy±1pptTemperatureRange-10 to 135 oC, 14 to 275 oFUnitoC, oFResolution0.1Accuracy±0.1MeasurementReading ModeAuto Read (Fast, Medium, Slow), Timed, ContinuousReading PromptsReading, Stable, LockedTemp. CompensationATC, MTCData managementData Storage1000 GroupsGLP FeaturesYesLog ManagementYesInputspH ElectrodeBNC(Q9)DO with Temp. Probe4-pin aviation connectorConductivity with Temp. Probe5-pin aviation connectorOutputsUSBUSB 2.0 flash memory device, PCRS 232printer, scanner, auto-samplerDisplay optionsBacklightYesAuto Shutdown1~60 min, offIP RatingIP54Date and TimeYesGeneralElectricityAC Adapter, 100-240V AC input, DC24V outputDimensions220×195×68 mmWeight950gPackaging & Shipping Certifications About us FAQQ: How about quality of the goods?A:l All the running products comply with CE standards.l Independent quality inspection team, conducting multiple inspections and random inspections from parts supply to product dispatch.l Well-known third-party testing service available, such as SGS, BV, and TUV, etc. Q: What are your pre- and after-sales services?A:l Timely reply to pre-sales enquiriesl Real-time update of manufacturing and shipment statusl Contracted third-party maintenance company in over 60 countriesAssured availability of parts supply for 10 years at least Q: Is OEM service available.A: Most of the running products are available for OEM customization, including logo, package and function, if attainable, customization. Q: How long is the lead time:A: Generally, the lead time for most stocked products is about 7~15 days, vary by models and production schedule. For those non-stocked products, the manufacturing lead time is around 20 days.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.