IPDB › China Industry › Chemicals › Active Carbon
Mrs Series Activated Carbon Desulfurizer for H2s Sulfur Removal1
Active Carbon, H2s Removal Process, Scavenger
Mingshuo Environment Technology Group Co., Ltd.
Preview:
Product Description Product DescriptionMingshuo MRS Series Activated Carbon DesulfurizerI. Application and performanceThe produced MRS series activated carbon desulfurizer is mainly used for a variety of sulfides removal, especially H2S removal from water gas, coke oven gas, natural gas, chemical raw material gas, flue gas etc.It has a unique high efficiency, high accuracy purification effect, especially for H2S removal. Moreover, there's no environmental pollution, possible to be reused and high purity elemental sulfur can be recovered through regeneration.II. Physical properties and characteristicsMRS series activated carbon desulfurizer is cylindrical solid particles with a dark black appearance. All of them are made of high-quality raw materials plus a certain amount of binders and co-catalysts through a series of finishing processes such as screening, batching, crushing, molding, drying, carbonization, and activation. This product is characteristic of high activity, large porosity, high desulfurization efficiency, good mechanical strength, good water resistance, low bed resistance, easy regeneration, and not easy to powder under high temperature, high pressure, thus widely used in gas phase desulfurization for all kinds of industries.Product ParametersIII. Main technical parametersBased on GB7701.1.97 and GB7702.1-22.97.ModelMRS-2 activated carbonMRS-3 activated carbonSize (mm)Ф 3.0~4.5 L5~15Ф 3.0~4.5 L5~10Sulfur capacity (mg/ g)≥ 900≥ 950Strength (N/ cm)≥ 90≥ 90Water capacity (%)≥ 60≥ 66Pore volume (cm3 / g)0.6 ~ 0.70.65 ~ 0.75Moisture (%)≤ 5≤ 5Bulk density (g/L)550~700550~650IV. Basic desulfurization principles 1. H2S removal from gas The H2S and a small amount of O2 in the gas are catalyzed by the surface of activated carbon, and the following reactions occur at normal temperature and pressure: 2 H2S + O2 = 2 H2O + 2 SThe water generated by the reaction is taken away by the gas stream, and the elemental sulfur formed is adsorbed by activated carbon, so as to achieve the purpose of removing H2S.2. Organic sulfur removal from gasCOS accounts for more than 96% of organic sulfur. At room temperature, COS is hydrolyzed by activated carbon to generate H2S first, and then it can be removed by the principle of H2S removal. The reaction is as follows:COS + H2O = H2S + CO2 2 H2S + O2 = 2 H2O + 2 SAccording to the gas phase desulfurization mechanism of activated carbon, it is proved that the quality of activated carbon is mainly determined by the porosity, the specific surface area and the strength of the surface activity. V. Application process conditions required Airspeed: 300 ~ 2000h -1 (under normal circumstances)Temperature: 20~100 °CSulfide and oxygen content ratio: ≥ 1: 2Relative humidity ≥ 70% (but without liquid water entering the activated carbon bed)Pressure: ≤ 6MpaLinear speed: ≤ 0.1m / s, city gas should be 0.01 ~ 0.05m / s.Company ProfileManagement System Certification: ISO9001:2008, ISO14001:2004, OHSAS18001:2007Company Introduction: Founded in 2004, Shandong Mingshuo New Energy Technology Co., Ltd. is located in Shandong Province, China. With a registered capital of CNY 88 million and an area of over 16 acres, Mingshuo is dedicated to the development, manufacturing, sales and service providing in environmental protection field.We mainly specialize in organic waste treatment, biogas plant, desulfurization system, biogas purification, biogas utilization and organic fertilizer systems. As the production base of medium and large biogas equipments in China, our company is highly recommended by China Biogas Association, China Association of Rural Energy Industry, and China Import and Export Commodity Website. Our company has passed the quality management system ISO 9001:2008, environment management system ISO 14001:2004 and occupational health & safety management system OHSAS 18001:2007 standards, with professional environmental engineering construction qualification, safety production license in construction field, and qualifications of Class D1, D2 pressure vessel. Moreover, we have obtained more than 30 patents and participated in the formulation of the national standards for biogas desulfurization equipment.With the unique design, professional R & D team, and pursuit of better solution, we're able to offer the most suitable and customized professional technical consulting, technical supports and after-sale services for all types of customers according to their different requirements and situations. Our products are widely used in biogas, fertilizer, coking, natural gas, city gas, food, ceramics, and other industries.Contact: Emma LuanPhone: +86 176 6023 9752
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.