IPDB › China Industry › Metallurgy, Mineral & Energy › Alloy
Lork Popular Annealed or Spring Temper Aws 061/N07214/W. Nr 2.4646 Super Alloy Rod for Land-Based Gas Turbines Haynes 214 Alloy Bar1
Super Alloy, Haynes Bar/Rod, Haynes Alloy
LORK GROUP CO., LTD
Preview:
Product Description Product Description IntroductionLORK is a super alloy manufacturer with 20 years of manufacturing experience. Haynes 214 is a Nickel-Chromium-Aluminium-Iron alloy which is principally intended for use at temperatures of 955 °C (1750 °F) and above. It exhibits resistance to oxidation that far exceeds virtually all conventional heat resistant wrought alloys at these temperatures, which is attributable to the forming of an Al2O3-type protective oxide scale, which forms in preference to Chromium Oxide scales at such high temperatures. Best suited for high temperature, low stress environments, Haynes 214 is used in the aerospace, automotive, industrial heating and medical industries, as well as for land-based gas turbines.Haynes 214 is also known as Cabot 214 and Hastelloy 214. Haynes 214 Application? Aerospace? Automotive? Industrial Heating? Medical Waste Disposal? Land-Based Gas Turbines.? Honeycomb seals? Flame hoods? Burners? Mesh belts? Catalytic converters? Chlorine contaminated incinerator systems,? Other static oxidation - limited partsHeat TreatmentHaynes 214 alloy is furnished in the solution heat-treated condition, unless otherwise specified. The alloy is normally solution heat-treated at 2000°F (1095°C) and rapidly cooled or quenched for optimum properties. Heat treating at temperatures below the solution heat-treating temperature will result in grain boundary carbide precipitation and, below 1750°F (955°C), precipitation of gamma prime phase. Such lower temperature age-hardening heat treatments are not suggested.Haynes 214 Chemical CompositionNickel75 BalanceChromium16Aluminum4.5Iron3Cobalt2 max.Manganese0.5 max.Molybdenum0.5 max.Titanium0.5 max.Tungsten0.5 max.Niobium0.15 max.Silicon0.2 max.Zirconium0.1 max.Carbon0.04Boron0.01 max.Yttrium0.01Haynes 214 Mechanical PropertiesTest TemperatureYield Strength, 0.2% OffsetUltimate Tensile StrengthElongationReduction of Area°F°CksiMPaksiMPa%%RTRT121.2836195.01345343720093116.3802190.313123941400204110.3761181.612523945600316107.9744175.412094144800427100.0689170.411754146100053899.3685164.211323843110059397.5672156.310783232120064993.8647141.49752124130070484.8585125.68661820140076067.2463105.06964437150081637.125672.046310670160087134.824054.135412484170092738.2*263*42.4*208*161*89*180098324.016530.421014194 FabricationHaynes 214 alloy, like many high aluminum content nickel-base alloys that are intended to be age-hardened by intermediate temperature heat treatment, will exhibit age-hardening as a result of the formation of a second phase, gamma prime (Ni3Al), if exposed at temperatures in the range of 1100 - 1700°F (595 - 925°C). As a consequence of this, Haynes 214 alloy is susceptible to strain-age cracking when highly stressed, highly-restrained, welded components are slowly heated through the intermediate temperature regime. The keys to avoiding this problem are to minimize weldment restraint through appropriate component design, and/or heat rapidly through the 1100 - 1700°F (595 - 925°C) temperature range during post-fabrication heat treatment (or first-use heat-up).With the exception of the above consideration, Haynes 214 alloy does exhibit good forming and welding characteristics. It may be forged or otherwise hot-worked, providing it is held at 2100°F (1150°C) for a time sufficient to bring the entire piece to temperature. Its room temperature tensile ductility is also high enough to allow the alloy to be formed by cold working. All cold or hot-worked parts should be annealed and rapidly cooled in order to restore the best balance of properties.The alloy can be welded by a variety of techniques, including gas tungsten arc (TIG), gas metal arc (MIG) or shielded metal arc (coated electrode) welding.Available Sizes And SpecificationsHaynes 214 available sizes and specificationsGradeHaynes 214Nickel plateThickness: 0.3mm - 150.0mmWidth: 1000mm - 3000mmNickel strip/ nickel foilThickness: 0.02mm - 16.0mmWidth: 5mm - 3000mmNickel coilThickness: 0.3mm - 16.0mmWidth: 1000mm - 3000mmNickel pipeOutside diameter: 6mm - 1219mmThickness: 0.5mm - 100mmNickel Capillary PipeOutside diameter: 0.5mm - 6.0mmThickness: 0.05mm - 2.0mmNickel barDiameter: Ф4mm - Ф600mmNickel wire rodDiameter:Ф0.01mm - Ф6mmDetectionProcessing Packaging & ShippingCompany ProfileFAQQ1: Do you accept the trial order ?A1: Yes,if we have the exactly size in stock.we can delivery even 1 piece/meter .Q2: Can I have free sample before making orders?A2: Yes,we can supply free sample as requirement,but buyer needs to pay the freight charges ,the freight fee will return to buyer after making order.Q3: How do you control the quality ?A3: MTC and PMI will be sent before shipment,any 3rd party inspection if need .Q4: How about your delivery time ?A4: Generally delivery time is 15 working days .Q5: How can I quickly get the price list ?A5: Directly click "chat now" or send us email with detail specifications,you will get the official price list in 1 hour .
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.