IPDB › China Industry › Metallurgy, Mineral & Energy › Alloy
Cuzn15 / C23000 / Cw502L / H85 Alloy Brass Bar Diameter 4 - 200mm Custom Cutting1
Copper Alloy, Cuzn15 Brass, Brass Bar
Wuxi City Ge Ming Sheng Steel Trading Co., Ltd
Preview:
Product Description PRODUCTS SPECIFICATION CuZn15 / C23000 / CW502L / H85 Alloy Brass Bar Diameter 4 - 200mm Custom Cutting ProductBrass Bar,Brass Rod,Brass Shaft,Brass Stick.StandardASTM,AISI,EN,BS,JIS,GB/T,BSI,AS/NZS,ISO,etc.MaterialH96,H90,H85,H80,H70,H68,H65,H63,H62,H60,C21000,C22000,C23000,C24000,C26000,C26800,C27000,C27200,C28000,C35000,etc.Or as required.Surface-mountmill,polished,bright,oiled,or as required.Density8.5g/cm3Diameters1-200mmHardness1/16 hard,1/8 hard,3/8 hard,1/4 hard,1/2hard,full hard,soft,etc.ShapeSquare,Rectangular,Round .Length500-6000mm,or as required.PackageStandard Sea-worthy package , fixed by belt then loaded into fumigatedwooden box .Container Size20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) MeterPort of shipmentTianjin Xingang port , Qingdao port , Shanghai port , ningbo port ,Guangzhou port ,etc.MATERIAL DESCRIPTION Brass is a term that refers to a wide range of copper-zinc alloys with different properties that include machinability, strength, hardness, wear-resistance, ductility, corrosion-resistance, antimicrobial, electrical and thermal conductivity and color.Brasses are available in a wide range of colors such as yellow, red, silver and gold etc. These colored brasses, which can be easily shaped, are used by designers and architects in order to improve the inside and outside appearances of buildings.UNS C23000 brass alloys are red in color and stronger than C22000 alloys. The following datasheet provides an overview of UNS C23000 red brass alloys.Chemical CompositionThe chemical composition of UNS C23000 red brass alloys is outlined in the following table.ElementContent (%)Cu85Zn15Physical PropertiesThe following table shows the physical properties of UNS 23000 red brass alloys.PropertiesMetricImperialMelting point-liquidus1027°C1880°FMelting point-solidus988°C1810°FDensity (@20°C/68°F)8.75 gm/cm30.316 lb/in3Mechanical PropertiesThe mechanical properties of UNS C23000 red brass alloys are displayed in the following table.PropertiesMetricImperialTensile strength269-724 MPa39-105 ksiYield strength69-434 MPa10-70 ksiElongation55%55%Poisson's ratio0.340.34Elastic modulus117 GPa16969 ksiOther DesignationsEquivalent materials to UNS 23000 red brass alloys are given in the table below:ASME B16.22ASTM B134ASTM B687ASTM B111ASME B16.29ASTM B135ASTM B698ASME SB543ASME SB111ASTM B359MIL T-20168ASTM B587ASME SB359ASTM B36QQ W321ASTM B543ASME SB395ASTM B395SAE J461 ASME SB43ASTM B43SAE J463 Fabrication and Heat TreatmentAnnealingUNS C23000 red brass alloys are annealed between 426 and 732°C (800 and 1350°F).Cold WorkingUNS C23000 brass alloys have excellent cold working capacity.WeldingThe welding processes used for UNS C23000 brass alloys include brazing, gas shielded arc welding, soldering, butt welding and spot welding. Coated metal arc welding and seam welding are not recommended for this brass alloy.ForgingUNS C23000 brass alloy can be forged between 788 and 899°C (1450 and 1650°F).MachinabilityUNS C23000 brass alloys have a machinability rating of 30.Hot WorkingUNS C23000 brass alloys have good hot forming capacity.PRODUCTS APPLICATION ApplicationsUNS C23000 brass alloys are used for jewelry, cold-formed hardware and electrical components, fittings, decorative chains and dezincification-resistant fasteners.PRODUCTS PICTURES
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.