IPDB › China Industry › Metallurgy, Mineral & Energy › Alloy
Premium Pure Aluminium Coil Sheets for Construction Projects1
Aluminium Alloy, Pure Aluminium Coil, Aluminum Coil Sheets
Tianjin ZYTC Alloy Technology Co., Ltd
Preview:
Product Description Product Description1100 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series). With a minimum of 99.0% aluminum, it is the most heavily alloyed of the 1000 series. It is also the mechanically strongest alloy in the series, and is the only 1000-series alloy commonly used in rivets. At the same time, it keeps the benefits of being relatively lightly alloyed (compared to other series), such as high electrical conductivity, thermal conductivity, corrosion resistance, and workability. It can be strengthened by cold working, but not by heat treatment.Applications:Aluminium/Aluminum 1100 alloy is widely used in fin stock, heat exchanger fins, spun hollowware, dials and name plates, decorative parts, giftware, cooking utensils, rivets and reflectors, and in sheet metal work.Chemical Composition AlloySi(%)Fe(%)Al(%)Cu(%)Mn(%)Mg(%)Cr(%)Zn(%)Ti(%)V(%)Ni(%)10500.250.499.50.050.050.05--0.050.03----10600.250.3599.60.050.030.03--0.050.030.05--10700.20.2599.70.040.030.03--0.040.03----10800.250.499.50.250.050.05--0.070.05----11000.95 Si+Fe990.05-0.20.05----0.1------12350.65 Si+Fe99.350.050.050.05--0.10.060.05--2A120.50.5Rem.3.8-4.90.3-0.91.2-1.80.10.250.15----2A140.6~1.20.7Rem.3.9~4.80.4~1.00.4~0.8--0.30.15--0.120140.6~1.20.7Rem.3.9~4.80.4~1.00.4~0.8--0.30.15--0.120240.50.5Rem.3.8-4.90.3-0.91.2-1.80.10.250.15----20170.2~0.80.7Rem.3.5~4.50.4~1.00.4~0.80.10.250.15----21240.50.5Rem.3.8-4.90.3-0.91.2-1.80.10.250.15----22190.20.3Rem.5.8~6.90.2~0.40.020.1~0.250.10.29~0.10.05~0.25--30030.60.7Rem.0.05-0.21.0-1.5----0.1------30040.30.7Rem.0.251.0-1.50.8-1.3--0.25------30050.60.7Rem.0.31.0-1.50.2-0.60.10.250.1----31050.60.8Rem.0.30.5~0.90.5~0.8--0.250.1----5A060.40.4Rem.0.10.5~0.85.8~6.8--0.20.02~0.1----50050.30.7Rem.0.20.20.5-1.10.10.25------50100.40.7Rem.0.10.15~0.40.6~1.40.150.30.15----50500.40.7Rem.0.20.11.1-1.80.10.25------50520.250.4Rem.0.10.12.2-2.80.15-0.350.1------56570.080.1Rem.0.10.030.6~1.00.030.05--0.05--50830.40.4Rem.0.10.40~1.04.0~4.90.05~0.250.250.15----52540.45 Si+FeRem.0.050.013.1~3.90.15~0.350.20.05----51540.250.4Rem.0.10.13.1~3.90.15~0.350.20.2----52520.080.1Rem.0.10.12.2-2.8--0.05------54540.250.4Rem.0.10.5-1.02.4-3.00.05-0.200.250.2----57540.40.4Rem.0.10.52.6-3.60.30.20.15----54560.250.4Rem.0.10.40~1.04.7~5.50.05~0.200.250.2----54570.080.1Rem.0.20.15-0.450.8-1.2--0.05------50860.40.5Rem.0.10.20~0.73.5~4.50.05~0.250.250.15----60030.35~1.00.6Rem.0.10.80.8~1.50.350.20.1----60130.6-1.00.5Rem.0.6-1.10.2-0.80.8-1.20.10.250.1----60610.4-0.80.7Rem.0.15-0.40.150.8-1.20.04-0.350.250.15----60630.20-0.60.35Rem.0.10.10.45-0.90.10.10.1----60820.7~1.30.5Rem.0.10.4~1.00.6~1.20.250.20.1----60050.20.35Rem.0.150.2~0.50.4~0.50.10.250.1----61010.3~0.70.5Rem.0.10.030.35~0.80.030.1------7A040.50.5Rem.1.4~2.00.2~0.61.8~2.80.10~0.255.0~7.00.1----70500.120.15Rem.2.0~2.60.11.9~2.60.045.7~6.70.06----70050.350.4Rem.0.10.2~0.71.0~1.80.06~0.204.0~5.00.01~0.06----70720.7 Si+FeRem.0.10.10.1--0.8-1.3------70750.40.5Rem.1.2-2.00.32.1-2.90.18-0.285.1-6.10.2----Series Introduction ProductsModelTemperThickness(mm)Width(mm)Length(mm)1000 SeriesIndustrial Pure Aluminum(1050,1060 ,1070, 1100)F,O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H111,H1120.1-50020-2650500-160002000 SeriesAluminum-copper alloys(2024(2A12), LY12, LY11, 2A11, 2A14(LD10), 2017, 2A17)F, O,T3,T4,T6,T73,T351, H1121.0-600500-2650500-160003000 SeriesAluminum-manganese alloys(3A21, 3003, 3103, 3004, 3005, 3105)F, O, H12, H14, H16, H18, H19,H22,H24,H26, H28,H112, H1140.1-50020-2650500-160004000 SeriesAl-Si alloys(4A03, 4A11, 4A13, 4A17, 4004, 4032, 4043, 4043A, 4047, 4047A)F, O, H12, H14, H16, H18, H19,H22,H24,H26, H28,H112, H1140.1-50020-2650500-160005000 SeriesAl-Mg alloys(5052, 5083, 5754, 5005, 5086,5182)F, O, H12, H14, H16, H18, H19,H22,H24,H26, H28,H112, H1140.1-60020-2650500-160006000 SeriesAluminum Magnesium Silicon Alloys(6063, 6061, 6060, 6351, 6070, 6181, 6082, 6A02)F,O.T4,T6.T651.H1120.3-60020-2650500-160007000 SeriesAluminum, Zinc, Magnesium and Copper Alloys(7075, 7A04, 7A09, 7A52, 7A05)F,O.T4,T6.T651.H1121.0-600<2650<8000Applications 1.Aerospace2.Food,3.Brewing industry4.Chemical products,5.Housing construction,6.Shipbuilding7.Automobile8.Transportation equipment9.Others Our Sizes & Grades & PhotosOur Detailed ProductsAluminum Sheet1. Thickness: 0.1mm to 3.0mm2. Width: Upto 2000mm3. Lenth: as the requirement4. Standard size: 1000*2000, 4'*8', 5'*10', 1250*2500,1500*30005. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc6. Surface: mill, bright, polished, hairline, brush, sand blast, checkered, embossed, etching, etc7. Temper: F, O, H12, H14, H24, H18, H112, H111, T4, T3, T5, T6, T651, T7651,T7351, etc.8. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report9. Technique: DC/CC10. Anodized: Available Aluminum Plate1. Thickness: 3.0mm to 600mm2. Width: Upto 2800mm3. Lenth: as the requirement4. Standard size: 1000*2000, 4'*8', 5'*10', 1250*2500,1500*30005. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc6. Surface: mill, bright, polished, hairline, brush, sand blast, checkered, embossed, etching, etc7. Temper: F, O, H12, H14, H24, H18, H112, H111, T4, T3, T5, T6, T651, T7651,T7351, etc.8. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report9. Technique: DC/CC10. Anodized: Available 11. Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.Aluminum Checker Sheet1. Thickness: 0.3mm to 6.0mm2. Width: Upto 1500mm3. Lenth: as the requirement4. Standard size: 1000*2000, 4'*8', 5'*10', 1250*2500,1500*30005. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc6. Surface: mirror polished with PVC coating, silver finish7. Temper: F, O, H12, H14, H24, H18, H112, H111, T4, T3, T5, T6, T651, T7651,T7351, etc.8. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report9. Pattern: 1 bar, 2 bars, five bars, lentils, willow leaf, or diamond pattern10. Theoretical Weight: Plus 0.6kg/sqm11. Material: 1050, 1060, 1100, 3003, 3105, 4017, 5052, 5083, 5086, 5754, 6061, 6063 Aluminum Circle1. Thickness: 0.1mm to 3.0mm2. Diameter: Upto 600mm3. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc4. Surface: mill finish, anodized, etc5. Temper: O, H12, H14, H22, H24, etc.6. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report7. Technique: DC/CC(DC For cookware and CC for road sign)8. Anodized: Available 9. Material Grade: 1050, 1060, 1100, 3003, 3004, 3105Aluminum Coil1. Thickness: 0.1mm to 6.0mm2. Width: Upto 2000mm3. Length: as the requirement4. Standard size: 1000*C, 4'*C, 5'*C, 1250*C,1500*C5. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc6. Surface: mill, bright, polished, hairline, brush, sand blast, checkered, embossed, etching, etc7. Temper: F, O, H12, H14, H24, H18, H112, H111, T4, T3, T5, T6, T651, T7651,T7351, etc.8. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report9. Technique: DC/CC10. Anodized: Available 11. Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.Aluminum Strip1. Thickness: 0.1mm to 6.0mm2. Width: Upto 900mm3. Length: as the requirement4. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc5. Surface: mill, bright, polished, hairline, brush, sand blast, checkered, embossed, etching, etc6. Temper: F, O, H12, H14, H24, H18, H112, H111, T4, T3, T5, T6, T651, T7651,T7351, etc.7. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report8. Technique: DC/CC9. Anodized: Available 10. Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.Aluminum Foil1. Thickness: 0.0045mm to 0.2mm2. Width: Upto 20500mm3. Length: Roll4. Standard: ASTM B209, ASTM B928, GB/T 3880, JIS H4000-2006, DIN EN 573-1, etc5. Surface: mill, bright, polished, hairline, brush, sand blast, checkered, embossed, etching, etc6. Temper: F, O, H12, H14, H24, H18, H112, H111, T4, T3, T5, T6, T651, T7651,T7351, etc.7. MTC: EN 10204-3., EN 10204-3.2, ISO9001, 3rd party inspect report8. Technique: DC/CC9. Anodized: Available 10. Processing Service: Bending, Welding, Decoiling, Punching, Cutting, etc.Packaging & ShippingAbout Our CompanyFAQQ1:What kind of ZYTC company?A: ZYTC is a professional manufacturer of metals and alloy productions and has its own warehouse with more than 30,000 tons capacity. We are working hard to open up the international market. At the same time, we will encounter a variety of purchase orders, In order to meet customer requirements and improve services, we will also distribute some kinds of metal products, of course, our strict procurement management and quality management departments can guarantee excellent quality of all products.Q2: What certificate does ZYTC have?A: ZYTC acquired the ISO 14001 environmental management system certificate, 0HSAS18001 occupational health and safety management system certificate, and ISO 9001 quality management system certificate.Q3: What's your purchasing system?A: Our procurement system adopts the 5R principle to ensure the "right quality" from the "right supplier" with the "right quantity" of materials at the "right time" with the "right price" to maintain normal production and sales activities. At the same time, we strive to reduce production and marketing costs to achieve our procurement and supply goals: close relationships with suppliers, ensure and maintain supply, reduce procurement costs, and ensure procurement quality.Q4: Who are your cooperate partners?A: ZYTC has a very good relationship with world-known factories, such as Baosteel, TISCO, ZPSS, JISCO, ATl, SMC, HAYNES, VDM, ArcelorMittal, etc.Q5: What are your company's payment methods? A: 30% T/T deposit, 70% T/T balance payment before shipment. More payment methods depend on your choices. Q6: Can you accept small orders?A: If we have the exact materials in stock, we can deliver even 1 piece. If we don't have the goods in stock, the MOQ is normally 1 ton.Q7: Do you guarantee the safe and reliable delivery of products?A: Yes, we always use high-quality packaging for shipping. We usually pack the products with a soft material such as polyethylene foam and then pack it in wooden cases to ensure the safety of the product in the process of transportation.Q8: Does ZYTC provide processing services?A: Yes, we also provide processing services to the outside world, and providing professional services is one of our goals. Such as bending, water cutting, laser cutting, digging holes, welded, slit coil, and other processing according to the drawings.Q9: How to guarantee the quality? A: Each production procedure will be subject to testing and evaluation. from the very choice of raw materials to the package for shipment. Only the products surviving all the tests are delivered for export.Q10: What if there is a quality problem?A: We also keep a piece of the sample before shipping. After comparing the buyer's test result, and it turns out to be our problem, we will return the money back and pay for your lost or delivery of qualified materials again.Q11: Can you provide samples?A: As a professional company, we know that the quality of products is valued by each customer, especially for international trade, we understand the customer's worries, so we can provide samples to customers, and we can ensure the consistency of the quality of samples and batch product products. The sample is free, but the buyer should pay the freight fee. And the freight fee will be returned in the future order.Q12: How about the delivery time?A: Stock products can be shipped within 3 days. Customized product delivery time is normally 25 working days, but it is also influenced by the specific requirements or the order quantity. Partial shipment is allowed.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.