IPDB › China Industry › Metallurgy, Mineral & Energy › Alloy
Ti-6-2-4-6 Titanium Alpha Beta Alloy Plate Sheet1
Titanium Alloy, Titanium, Titanium Alpha Beta
Hunan Fushun Metal Co., Ltd.
Preview:
Product Description Product Description Pure Titanium And Titanium Alloy Sheet, Strip, Bar, Tube, ExtrusionWe offers a complete range of titanium and titanium alloy mill products in sheet, strip, plate, billet, bar, rod, extrusions and tubulars. We also offer metal processing services including hot-forming (e.g super plastic forming), extrusion,seamless pipe production, water jet and saw cutting, and machining. Sizes: Sheets & PlateGRADESPECIFICATIONS 6AL-4V, 6AL-4VELIAMS-4911, 4907, 4905, MIL-T-90450.012" TO 4.00" x R/W x R/LASTM-F136, DMS-1592, GM3103, 12TM-B265 6AL-2SN-4ZR-2MOAMS-4919, MIL-T-9046, DMS-2275, AMS-T-9046,Sizes: CoilGM-3104, B50TF21 6AL-6V-2SNAMS-4918, MIL-T-9046, DMS-1879, AMS-T-90460.001" TO 0.011 x R/W x R/L5AL-2.55N,AMS-4909, 4910, MIL-T-9046, AMS-T-9046 5-2.5 ELI BAL-1MO-1VAMS-4915, 4916, DMS-1784 CP-GRADES 1,2,3,4AMS-4900, 4902, MIL-T-9046, AMS-T-9046, DMS-1536, ASTM-B265 15V-3CR-3SN-3ALAMS-4914 ROD, BAR & FORGINGSFull Range Of Sizes In All GradesGRADESPECIFICATIONS6AL-4V, 6AL-4VELIAMS-4928, 4930,4965, 4967, MIL-T-9047, AMS-T-9047, ASTM-F-3676AL-2SN-4ZR-2MOAMS-4975, MIL-T-9047, AMS-T-90476AL-6V-2SNAMS-4978, MIL-T-9047, AMS-T-90475AL-2.55NAMS-4926, 4966, MIL-T-9047, AMS-T-9047, B50TF228AL-IMO-IVAMS-4972, 4973, MIL-T-9047, AMS-T-9047CP-GRADES 1,2,3,4,7AMS-4921, MIL-9047, ASTM-B-348, ASTM-F-67 TUBINGFull Range Of Sizes In All GradesGRADESPECIFICATIONSCP-GRADES 2,3,4AMS-4941, 4942, BMS-7-21, DMS-1872, 1874, 18983AL-2.5VAMS-4943, 4944, 4945, DMS-2241, B50TF35, PWA-1260EXTRUSIONSFull Range Of Sizes In All GradesGRADESPECIFICATIONS6AL-4VAMS-4934, 4935, MIL-T-815566AL-6V-2SNAMS-4937, MIL-T-815568AL-IV-IMOAMS-4933 COMMERCIALLY PURE TITANIUM SHEETSGRADEBRITISHFRANCEGERMANSTANDARDAEROSPACEGr. 1BS 2TA 1T-353.7024Gr. 2BS 2TA 2T-403.7034Gr. 3DTD5023T-503.7054Gr. 4BS 2TA 6T-603.7064 ALPHA AND NEAR-ALPHA ALLOYSTi-0.3Mo-0.8Ni(Grade 12)[Ti-12]Highly weldable and fabricable Ti alloy offering improved strength and pressurecode design allowables,hot brine crevice corrosion,and reducing acidresistance compared to Ti Grades 1,2,and 3.Approved for sour service useunder the NACE MR-01-75 StandardIngot/Bloom,BilletWelded Pipe,Plate,StripWelded TubingSeamless Pipe,Wire*Ti-3Al-2.5V (Grade 9)[Ti-3-2.5]Medium strength,non-ageable Ti alloy offering highest strength and designallowables under the pressure vessel code,with good weldability andcold fabricability for mildly reducing to mildly oxidizing mediaIngot/Bloom,BilletWelded Pipe,Plate,StripWelded Tubing,Foil*Seamless Tubing*,Wire'Ti-3Al-2.5V-Pd(Grade 18)[Ti-3-2.5-Pd]Pd-enhanced version of Ti-3Al-2.5V with equivalent physical and mechanicalproperties and fabricability,offering elevated resistance to dilute reducing acidsand crevice corrosion in hot halide (brine)mediaIngot/Bloom,Billet,WeldedPipe,Plate,Strip,Weldedlubing,Seamless PipeTi-3Al-2.5V-Ru(Grade 28)[Ti-3-2.5-Ru]Ru-enhanced version of Ti-3Al-2.5V with equivalent physical and mechanicalproperties and fabricability,offering elevated resistance to dilute reducing acidsand crevice corrosion in hot halide (brine)media.Approved for sour service useunder the NACE MR-01-75 StandardIngot/Bloom,Billet,WeldedPipe,Plate,Strip,WeldedTubing,Seamless PipeWire*Ti-5Al-2.5Sn (Grade 6)[Ti-5-2.5]Weldable,non-ageable,high-strength alloy offering good high temperaturestability,strength,oxidation and creep resistance.Ingot/BloomBar*,Billet,SheetTi-5Al-2.5Sn ELI[Ti-5-2.5 ELI]Extra low interstitial version of Ti-5Al-2.5Sn exhibiting an excellent combinationof toughness and strength at cryogenic temperatures;suited for cryogenicvessels for service as low as -255°CIngot/Bloom,Bar*,BilletTi-8Al-1Mo-1V[Ti-8-1-1]Highly creep-resistant,non-ageable,weldable,high-strength Ti alloy foruse up to 455°C;exhibiting the lowest density and highest modulus of allcommercial Ti alloysIngot/BloomBar*,Billet,SheetTi-6Al-2Sn-4Zr-2Mo-0.1Si[Ti-6-2-4-2-S]Weldable,high strength Ti alloy offering excellent strength,stability,and creepresistance to temperatures as high as 550oCIngot/BloomBar*,Billet,Sheet ALPHA-BETA ALLOYSTi-6Al-4V (Grade 5)[Ti-6-4]Heat treatable,high-strength,most commercially available Ti alloy ("workhorse"alloy for aerospace applications),for use up to 400°C offering an excellentcombination of high strength,toughness,and ductility along with good weldabilityand fabricabilityIngot/BloomBar*,Billet,Plate,Sheet Seamless Pipe,Wire*Seamless Tubing*,Foil*Ti-6Al-4V ELI (Grade 23)[Ti-6-4 ELI]Extra low interstitial version of Ti-6Al-4V offering improved ductility and fracturetoughness in air and saltwater environments,along with excellent toughness,strength,and ductility in cryogenic service as low as -255°C.Typically used in anon-aged condition for maximum toughness.Ingot/Bloom,Bar*,BilletPlate,Sheet,Wire*Seamless Tubing*,Foil*Ti-6Al-4V-0.1Ru (Grade 29)[Ti-6-4-Ru]Extra low interstitial,Ru-containing version of Ti-6Al-4V offering improved fracturetoughness in air,seawater,and brines,along with resistance to localized corrosionin sweet and sour acidic brines as high as 330°C.Approved for sour service useunder the NACE MR-01-75 StandardIngot/Bloom,Bar*,Billet Plate,Sheet,SeamlessPipe,Wire*Ti-6Al-7NbHigh strength Ti alloy with good toughness and ductility,used primarily formedical implants stemming from its excellent biocompatibilityIngot/BloomBar*,Billet,Wire*Ti-6Al-6V-2Sn[Ti-6-6-2]Heat-treatable,high-strength Ti alloy with higher strength and sectionhardenability than Ti-6Al-4V,but with lower toughness and ductility,and limitedweldability.Can be used in mill annealed or in the aged (very highstrength)condition.Ingot/Bloom,Bar*,BilletPlate.SheetTi-6Al-2Sn-4Zr-6Mo[Ti-6-2-4-6]Heat-treatable,deep-hardenable,very high strength Ti alloy with improvedstrength to temperatures as high as 450°C,with limited weldability.Approvedfor sour service under the NACE MR-01-75 Standard.Ingot/Bloom,Bar*,BilletTi-4Al-4Mo-2Sn-0.5Si[Ti-550]Heat-treatable,high strength forging alloy with good strength and creepresistance to temperature as high as 400°C.Ingot/Bloom,Bar*,BilletTi-6Al-2Sn-2Zr-2Mo-2Cr-0.15S[Ti-6-22-22]Heat-treatable,high strength Ti alloy with strength and fracture toughness-to-strength properties superior to those of Ti-6Al-4V,with excellentsuperplastic formability and thermal stability.Ingot/Bloom,Bar*,BilletPlate,Sheet,Wire*Ti-4.5Al-3V-2Mo-2Fe[SP-700]Heat-treatable,high strength Ti alloy with superior strength and exceptionalhot and superplastic formability compared to Ti-6Al-4V,combined with goodductility and fatigue resistanceIngot/Bloom,Bar*,BilletPlate.SheetTi-5Al-4Cr-4Mo-2Sn-2Zr[Ti-17]Heat-treatable,deep section hardenable,very high strength Ti alloy withsuperior strength and creep resistance over Ti-6Al-4V to temperatures ashigh as 400C,and limited weldabilityIngot/Bloom,Bar*,Billet NEAR-BETA AND BETA ALLOYSTi-10V-2Fe-3Al[Ti-10-2-3]Heat-treatable,deep hardenable,very high strength Ti alloy possessingsuperior fatigue and strength/toughness combinations,with exceptionalhot-die forgeability,but limited weldability.Ingot/Bloom,Bar*,Billet Ti-3Al-8V-6Cr-4Zr-4Mo [Ti Beta-C] (Grade 19)A heat-treatable,deep section hardenable,very high strength Ti alloypossessing good toughness/strength properties,low elastic modulus andelevated resistance to stress and localized corrosion in high temperaturesweet and sour brines.Approved for sour service under theNACE MR-01-75 StandardIngot/Bloom,Bar*,Billet,Seamless Pipe,Wire*Ti-3Al8V-6Cr-4Zr-4Mo-0.05Pd[Ti Beta-C/Pd] (Grade 20)A Pd-containing version of the Ti-38644 alloy (Beta-C/Pd)possessingequivalent physical/mechanical properties,but with significantly enhancedresistance to stress and localized corrosion in high temperature brines.Ingot/Bloom,Bar*,Billet,Seamless PipeCOMMERCIALLY PURE (UNALLOYED)TI GRADESTi Grade 1Lower strength,softest,unalloyed Ti grade with highest ductility,cold formability,and impact toughness,with excellent resistance to mildly reducing to highlyoxidizing media with or without chlorides and high weldabilityIngot/Bloom,Bar*,Billet,Plate,Strip,Welded Tubing,Welded Pipe,Wire*Ti Grade 2Moderate strength unalloyed Ti with excellent weldability,cold formability,and fabricability;"workhorse"and "garden variety"Ti grade for industrialservice with excellent resistance to mildly reducing to highly oxidizing mediawith or without chlorides.Approved for sour service use under the NACEMR-01-75 Standard.Ingot/BloomBar,Billet,Plate,Strip,Welded Tubing,Welded Pipe,SeamlessTubing*,Wire*,Foil*Ti Grade 3Slightly stronger version of Gr.2 Ti with similar corrosion resistance with goodweldability and reasonable cold formability/ductilityIngot/BloomBar;Billet,Plate,Strip,Welded Tubing,Welded PipeTi Grade 4Much stronger,high interstitial version of Grades 2 and 3 Ti with reasonableweldability,and reduced ductility and cold-formabilityIngot/BloomBar*,Billet,Plate,Strip COMMERCIALLY PURE GRADES MODIFIED WITH Pd OR RuTi-0.15Pd[Ti-Pd](Grade 7)Most resistant Ti alloy to corrosion in reducing acids and localized attack in hothalide media,with physical/mechanical properties equivalent to Gr.2 Ti,andexcellent weldability/fabricabilityIngot/Bloom,Bar*,BilletPlate,Strip,Welded Tubing,Welded Pipe,Wire*Ti-0.15Pd(Grade 11)Most resistant Ti alloy to corrosion in reducing acids and localized attack in hothalide media,with physical,mechanical,formability properties equivalent toGr.1 Ti(soft grade)and excellent weldabilityIngot/Bloom,Bar*,BilletPlate,Strip,Welded Tubing,Welded Pipe,Wire*Ti-0.05Pd(Grade 16)Lower cost,leaner Pd version of Ti Gr.7 with equivalent physical/mechanicalproperties,and similar corrosion resistanceTubing,Welded PipeIngot/Bloom,Bar*,BilletPlate,Strip,Welded Tubing,Welded Pipe,Wire*Ti-0.05Pd(Grade 17)Lower cost,leaner Pd version of Ti Gr.11 with equivalent physical/mechanicalproperties and fabricability (soft grade)and similar corrosion resistance.Tubing,Welded PipeIngot/Bloom,Bar*,BilletPlate,Strip,Welded Tubing,Welded Pipe,Wire*Ti-0.1Ru[TiRu-26](Grade 26)Lower cost,Ru-containing alternative for Ti Gr.7 with equivalentphysical/mechanical properties and fabricability and similar corrosion resistanceTubing,Welded PipeIngot/Bloom,Bar*,BilletPlate,Strip,Welded Tubing,Welded Pipe,Wire*Ti-0.1Ru[TiRu-27](Grade 27)Lower cost,Ru-containing alternative for Ti Gr.11 with equivalentphysical/mechanical properties (soft grade)and fabricability and similarcorrosion resistance.Ingot/Bloom,Bar*,BilletPlate,Strip,WeldedTubing,Welded PipeTitaniumComposition Requirements, weight percentGradeCONHFeAlVPdNiMo1≤0.08≤0.18≤0.03≤0.015≤0.20-----2≤0.08≤0.25≤0.03≤0.015≤0.30-----3≤0.08≤0.35≤0.05≤0.015≤0.30-----4≤0.08≤0.40≤0.05≤0.015≤0.50-----5≤0.08≤0.20≤0.05≤0.015≤0.405.5~6.753.5~4.5---7≤0.08≤0.25≤0.03≤0.015≤0.30--0.12~0.25--9≤0.08≤0.15≤0.03≤0.015≤0.252.5~3.52.0~3.0---11≤0.08≤0.18≤0.03≤0.015≤0.20--0.12~0.25--12≤0.08≤0.25≤0.03≤0.015≤0.30---0.6~0.90.2~0.416≤0.08≤0.25≤0.03≤0.015≤0.30--0.04~0.08--17≤0.08≤0.18≤0.03≤0.015≤0.20--0.04~0.08--23≤0.08≤0.13≤0.03≤0.0125≤0.255.5-6.53.5~4.5--- TitaniumTensile StrengthYield StrengthElongationBend Test(Radius of Mandrel)Gradeksi [MPa]0.2% offset, ksi [MPa]in 2", %t<1.8 mm1.8 mm≤t<4.75 mm1≤35 [240]20~45 [138~310]241.5T2T2≤50 [345]40~65 [275~450]202T2.5T3≤65 [450]55~80 [380~550]182T2.5T4≤80 [550]70~95 [483~655]152.5T3T5≤130 [895]≤120 [828]104.5T5T7≤50 [345]40~65 [275~450]202T2.5T9≤90 [620]≤70 [483]152.5T3T11≤35 [240]20~45 [138~310]241.5T2T12≤70 [483]≤50 [345]182T2.5T16≤50 [345]40~65 [275~450]202T2.5T17≤ 35[240]20~45 [138~310]241.5T2T23≤120 [828]≤110 [759]104.5T5T Detailed Photos
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.