IPDB › China Industry › Metallurgy, Mineral & Energy › Alloy
Tungsten Nickel Copper Alloy W95nicu in Rod/Bar/Sheet1
Nickel Alloy, Tungsten Nickel Copper Alloy, Tungsten Copper Alloy Sheet
Luoyang Jiangchi Metal Material Co., Ltd.
Preview:
Product Description High Quality Tungsten High Heavy Alloy ASTM B777-07 rods/sheet/tubesTungsten high heavy alloy-Tungsten Nickel Iron Alloy-Tungsten Nickel Copper Alloy- Material: W90-97NiFe(Magnetic) & W90-97NiCu(Nonmagnetic) - Density:16.8-18.8g/cm3 - Rods Size:dia(1.5 -200) x Length<500mm Plate size: 0.1min Thickness*W*LProduction Method 1), Blending of tungsten powder with other metal powders and a bonding agent, cooling and sieving. 2), Pressing the blended powder to the required shape (allowing for shrinkage during the final processing), and shaping the green part component. 3). Pre-sintering the pressed components to remove the bonding agent. Final sintering in the hydrogen fed furnace to fuse the powder particles together. 4). Supplied in bar, square, round and rectangle sizes are available in rough oversize, or turned or ground to exact requirements. Components can also be produced to customer drawings. High density Tungsten based alloy tungsten bearing ball (tungsten supper shot)-Tungsten Nickel Iron Alloy-Tungsten Nickel Copper AlloyTungsten Alloy Density: (17~18.5)Tungsten Alloy component: W(88-98)% with the addition of nickel and copper or nickel and iron, etcTungsten Alloy applications: For making rotors of aircraft wings, shileding materias for radioactive isotope (Cobalt 60), and formaterials of armor piercing bullets and mould, etc.1) Density of tungsten shot: 17g-18.5g/cm32) Available size: Dia: 2.0mm,dia2.25mm,dia2.5mm,dia3.0mm,dia3.5mm,dia4.0mm,dia4.5mm, dia5.0mm,dia5.5mm,dia6.0mm,dia6.5mm and so on,the biggest size is dia15mm.Heavy Tungsten nickel iron/ tungsten nickel copper(WNiFe&WNiCu) alloy Material: W90NiCu, W90Ni7Fe3, W92NiCu, W92.5NiFe, W95NiFe, W97Ni2Fe1, etcClassNominal tungsten (weight percent)Density (g/cc)Hardness ( HRC )(maximum)19016.85 - 17.2532292.517.15- 17.853339517.75- 18.353449718.25- 18.8535Tungsten Copper Tungsten alloy WCu plate/sheet/bar1. WCu tungsten copper alloy specification: 1) WCu (W70Cu, W75Cu, W80Cu, W85Cu, W90Cu, etc) 2) Density:16-18.8g/cm3 3) Size:As your need Plate: (0.04-50)* W X L rod-Dia.1.5 - 200 X 300mm Long 4) Flatness tolerance:<4um 5) Roughness:Ra1.6-Ra0.8 6) Surface: polished, ground.WCu tungsten copper alloy Chemical compositionMaterialWCu%Tungsten ContentHardnessHBg/Density at 20oCW/M.KThermal conductivity at 25oC(10-6/k)Coefficient of thermal expansion at 20oCW90Cu109026017.0180-1906.5W85Cu158524016.4190-2007.0W80Cu208022015.6200-2108.3W75Cu257519514.9220-2309.0W50Cu505012512.2310-34012.5Tungsten sheet/plate/foil/strip Specification:1) Tungsten Sheet/Plate Purity: 99.95%2) Density: >19.1g/cm33) Size: according to the needs of users: T(0.03-40)*W(20-600)*L L<2000mm4) Surface: Black,Alkali Wash and Polished5) Condition: hot roll6) Products Application: Tungsten is suitable for light, electric vacuum device, electric semiconductor device, glass fiber kiln heating element, heat shield, boat and finished products etc.Material:W90-97NiFe(Magnetic)&W90-97NiCu(Nonmagnetic)Density:16.8-18.8g/cm3Property of tungsten alloyAMST 21014 class 190%WNiFe, 90%WNiCuDensity : 17.0Hardness: 32HRC maxElongation: 5-20%AMST 21014 class 292.5%WNiFe, 92.5%WNiCuDensity : 17.2Hardness: 33HRC maxElongation: 5-15%AMST 21014 class 395%WNiFe, W95NiCuDensity : 18.0Hardness: 34HRC maxElongation: 3-10%AMST 21014 class 497.5%WNiFe, W97.5NiCuDensity : 18.85Hardness: 35HRC maxElongation: 1-8% Tungsten Alloys EFI GradeEF17EF175EF18EF185ASTM B 777-071234Weight % Tungsten9092.59597Nominal Density GM/CC17.0017.5018.0018.50Minimum* Ultimate Tensile Strength UTS (KSI)110110105100Minimum* Elongation %5532Modulus of Elasticity (KSI)45,00048,00050,00052,0001. Tungsten copper alloy rod Specification:Material: W50-90Cu10-50Density: 11.85g/cm3-16.75g/cm3Product standard: GB8320-87WCu alloy foil size: Thickness(0.08-0.7mm)*Width<120mm*Length<300mmWCu alloy sheet size: diameter(3-100mm)*L<500mm2. Pure tungsten/molybdenum rod surface finish:Black: surface is as swaged or as drawn, retaining a ciating of processing lubricants and oxides.Cleaned: Surface is chemically cleaned to removed all lubricants and oxides.Ground: Surface is centerless to ground to remove all coating and to achieve precise diameter control.3. Pure tungsten rod dimension:TungstenContentTypeDiameter(mm)Dia.Tolerance(mm)Length(mm)L tolerance(mm)99.95%Sintering rod40-100±3500max±599.95%Froged rod20-80±2800max±599.95%Ground rod2-60±0.1600max±1Tungsten rods available size:Forged rods size: Diameter(2-100mm)*Length<2500mmStrainghtened rods after drawn diameter 0.8-3.2mm4. Chemical compositionContent of TungstenContent of all other elementsContent of each element≥99.95%≤0.05%≤0.01%5. Application & Features Used as electrodes in the field of rare earth metal industry; For producing electric light source parts and electric vacuum components; Used in electric boosting glass kiln electrode; Suitable for producing ion implantation parts; For producing heating elements and refractory parts in high teperature furnaces; Very good interlaminar strength at strong thermal and mechanical loadings6. More information about us:We promise you -- The advantage of us: 1) products quality, with many years of producing experience 2) low price in the market, and factory direct sales. 3) the whole production line from powder to finished products, top and steady quality assured 4) good packing for safe exprot delivery, and fast manufacturing time 5) fast delivery and best after-sale service.
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.