IPDB › China Industry › Metallurgy, Mineral & Energy › Alloy
2017 Aluminum Plate with High Hardness1
Aluminium Alloy, High Strength Aluminum Plate, 2017 High Hardness Al Plate
Shanghai Bozhong Metal Group Co., Ltd.
Preview:
Product Description 2017High strength, high hardness and high temperature resistance Aluminum PlateProduct Description2017High strength, high hardness and high temperature resistance Aluminum PlateThe Al-Cu-based cast aluminum alloy refers to a cast aluminum alloy with copper as the main alloy element. The copper content ranges from 1-11%. Al-Cu alloys containing more than 9% copper have good casting properties and can be used for metal casting. And it has good polishing performance and electroplating performance, but the heat treatment strengthening effect is not large, and the mechanical properties are low. Mainly used for decorative parts.It is suitable for sand casting and investment casting to produce high-strength structural parts with less complicated shapes. Such as beams, pylons, ribs, wheels, supports, etc. in aircraft structures1), Alloy we supply: 1050/1060/1070/1100/3003/3004/3103/3104/5005/5052/5083/5182/5754/6005/6061/6063/8011,etc.Aluminum plate refers to the aluminum material with a thickness of more than 0.2mm to less than 500mm, a width of more than 200mm, and a length of less than 16m, called aluminum sheet or aluminum sheet, less than 0.2mm is aluminum, and less than 200mm is a row or strip (of course With the advancement of large equipment, there are more aluminum plates that can be as wide as 600mm).Aluminum plate refers to a rectangular plate formed by rolling an aluminum ingot. It is divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium-thick aluminum plate, and patterned aluminum plate.Advantages The copper content ranges from 1-11%. Al-Cu alloys containing more than 9% copper have good casting properties and can be used for metal casting. And it has good polishing performance and electroplating performance, but the heat treatment strengthening effect is not large, and the mechanical properties are low. Mainly used for decorative parts.For the above-mentioned alloy, you may be interested in:CC aluminum plate/sheet: Means Continuous Casting coil, it can not be used for deep drawing and anodising,but it can be bend over 90 degrees.DC aluminum plate/sheet: means Direct casting coil, it can be used for deep drawing and anodising.2), Size we supply:Thickness: (0.15-6.0)mm,(8-250)mm,maximum.Width: 1000/1220/1250/1300/1350/1500/2000mm(maximum),and other special width.Length: 2000/2400/2440/2500/3000/4000/5000/6000mm,etc.Thicnk tolerance: +/-0.03mm3),Temper:HO/H14/H24/H16/H18/H19/H32/H111/H111//T6/T651,etc.4)Chemical composition and performanceAluminum Al: balance; silicon Si: 0.25; copper Cu: 0.10; magnesium Mg: 2.2 ~ 2.8; zinc Zn: 0.10; manganese Mn: 0.10; chromium Cr: 0.15 ~ 0.35; iron Fe: 0.40.Tensile strength (σb): 170 ~ 305MPaConditional yield strength σ0.2 (MPa) ≥ 65Elastic modulus (E): 69.3 ~ 70.7GpaThe annealing temperature is: 345 oC.5)Application:1. Lighting and lighting 2. Solar reflector 3. Building appearance 4. Upholstery: ceilings, walls, etc. 5. Furniture, cabinets 6, elevators 7, signs, inscriptionsAluminum plateAluminum plateBrands, luggage 8, interior and exterior decoration of cars 9. Interior decorations: such as photo frames 10, household appliances: refrigerators, microwave ovens, audio equipment, etc. 11. Aerospace and military aspects, such as China's large aircraft manufacturing, Shenzhou spaceship series, satellites . 12. Mechanical parts processing 13. Mold manufacturing 14. Chemical / insulation pipe coating. 15. High quality ship plate6)Care and maintenanceThe specific cleaning steps of the aluminum plate are as follows:1. First rinse the surface of the board with plenty of water;2. Use a soft cloth soaked with detergent diluted in water to gently wipe the surface of the test board;3. Rinse the surface of the board with plenty of fresh water to wash away the dirt;4. Check the surface of the board, and focus on cleaning the places that are not cleaned with detergent;5. Rinse the board surface with clean water until all the detergent is washed away.Note: Do not clean the hot board surface (when the temperature exceeds 40 ° C), because the excessive evaporation of water is harmful to the board surface paint!In particular, please choose the appropriate detergent. A basic principle is: you must choose a neutral detergent! Please do not use strong alkaline detergents such as potassium hydroxide, sodium hydroxide or sodium carbonate, strong acid washing Agents, abrasive detergents and baking detergents.7), Packing:For Sheet Packing:2-2.5mts per pallet, standard international export packing, For Coil Packing:Eye to wall or Eye to Skype packing, 2-3mts per coil or 5-7mts per coil, Coil ID: 505MM/508MMCustomer may require interleaf papers into sheets or require blue protective PE film on sheet&coil surface. 8), Coil/ sheet surface requirement: No scratches, white corrosion, water stain, black stain marks, oil stain or streak marks.6) Ending Application:Construction, decoration, electronic products, wall Cladding, Truck body, Signboard, Insulation, Ceiling, aerospace,aviation, household appliance, lighting, and some other areas,etc.Contact Information: Name:Diana YangWeb:Http://shanghaibozhong.en.made-in-china.com
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.