IPDB › China Industry › Manufacturing & Processing Machinery › Agricultural Machinery
Greenhouse picking trolley scissor picker1
Agricultural Machinery, Harvesting Machine, Greenhouse picking trolley, Scissor picker
Jinan Moral International Co., Ltd.
Preview:
Product Description Greenhouse picking trolley scissor pickerGreenhouse picking trolley is developed on the basis of absorbing the advantages of similar products domestic and overseas, this design is a mobile lifting equipment which has good lifting stability and wide applicability. Mainly suitable for indoor work, due to the small size of the whole machine, it has better flexibility and maneuverability, and has a wide range of use areas, great liquidity.1) Greenhouse picking trolley is under special agencies on the ground combined with actual needs continuous optimization design, the fuselage use chassis of electric and hydraulic shear fork lift platform mechanism, combining the advantages of small volume, low noise, realize stepless speed, simple structure, easy operation, zero emission, the advantages of no pollution, is mainly used for greenhouse facilities in tomato, cucumber, the efficiency of fruit harvesting, crop pruning, artificial pollination and other agricultural operations, work efficiency can be increased more than 10 times. 2) The product relies on electric drive in the greenhouse track stepless speed regulation forward and backward operation, braking, the table can realize automatic control hydraulic lifting, in the greenhouse narrow channel operation, at the same time can realize the remote automatic remote control operation. 3) Track picking trolley is one of the necessary equipment in the cultivation and production of modern greenhouse vegetables long plum section, in order to facilitate the pruning fork after the plant is too high. Fruit collection and other links, the greenhouse picking trolley, can achieve accurate, fast lifting, meet any angle, height of fruit picking, pesticide pruning, pollination and other operations, and the operation is safe and reliable.Stucture: Greenhouse picking trolley consists of six parts: working platform, scissor arm, lifting cylinder, chassis lifting mechanism, hydraulic control system, and bottom frame.Technical SpecificationSpecificationSJYZ0.2-3SJYZ0.2-4Max platform height from groundmm30004000Min platform height from groundmm590632Platform sizemm1910*5001910*500Load capacitykg200200Min ground clearancemm7575Batteryv/Ah2x12/802x12/80Lifting motorv/kw12/0.812/0.8Driving motorv/kw24/0.524/0.5Driving speedkm/h0-40-4Chargerv/a24/20A24/20AOverall lengthmm19361936Overall widthmm770770Overall heightmm16421682Machine weightkg490550Track typeTrack-center distance550Pipe diameter * thickness48*4IntroductionsThe electronic control is imported from the United StatesDrive motor imported from ItalyHydraulic unit seals imported from JapanAdvantage of greenhouse picking trolley1) Ergonomic design, simple and convenient operation, equipped with foot switch, more convenient and flexible movement. 2) Safe and reliable products, complete protective measures, the bottom is equipped with a strong safety guide rail, with brake system, can support to equip supporting columns. 3) Flexible transfer, the bottom of the equipment is equipped with 4 flange wheels to ensure smooth movement along the track, equipped with 4 rubber tires, so that it can drive along the cement road, greenhouse picking trolley longitudinal forward and backward driving to achieve stepless speed regulation. 4) The lifting platform is driven by hydraulic lifting system to achieve smooth and continuous vertical lifting. The system runs flexibly and can automatically and smoothly adjust the height. If the lifting is not used for a long time, the main switch can be closed. 5) The equipment is equipped with two control boards, the control board on the operating table is equipped with emergency stop switch, direction switch and speed switch, also can control the operation platform lifting and moving. 24V output power supply can be connected to the control panel for connecting fans or lighting.Working Principle The oil pump is driven by the motor, and the high-pressure oil enters the P cavity of the valve block, and is output to the A cavity through the check valve 1, and enters the lifting cylinder to raise the working platform slowly. Depending on the load, the working pressure is set by the relief valve 2 to prevent overload or overpressure. When the working platform descends, turn on the solenoid valve 4. Under the gravity of the working platform load, the hydraulic oil of the lifting cylinder flows to the A cavity and enters the valve block. Because the check valve 1 is reversely closed, the hydraulic oil can only pass through the opened solenoid valve 4, through the adjustable flow valve 3, it is discharged into the oil tank from the O cavity, and the working platform is slowly lowered. Because the pressure balance structure is adopted inside the valve, its closing and starting operations are only controlled by the electromagnet, so the stability of the lifting speed will not be affected by the load fluctuation.Operation Instructions1) Operation (power) input: Turn on the main power switch and key switch on the base control box. 2) Platform down/up: Press the green button on the control box, the platform will go up; press the red button on the control box, the platform will go down. There are the same operation buttons on the base. When the equipment is not used for a long time, the emergency stop button switch on the control box must be turned off. 3) Equipment walking: turn on the toggle switch on the upper control box to the walking gear, choose the forward and backward state you want to walk (switch rotation), adjust the speed you want to walk (adjust the speed control switch), and step on the foot switch on the platform slightly. 4) Chassis up/down: Press the up/down button on both sides of the upper control box or the chassis up/down button on the chassis to realize the chassis up/down function. When the up button is pressed, the chassis rises, and then the machine can rotate 360 degrees. After adjusting the working state, press the down button to retract the limb legs and return to the walking state. 5) There is a charging stand on the chassis, and the external power supply is AC220V to charge the battery. 6) The lifting platform is strictly prohibited to be overloaded for lifting work.7) When the lifting platform is raised, it is strictly forbidden for the operator to use other objects at high altitude to perform large force movements in the horizontal direction.Product PicturesMaintenance1) The hydraulic oil should be replaced 12 months after the product is put into use, and it will be replaced irregularly in the future depending on the frequency of use and the degree of contamination of the hydraulic oil. When the hydraulic oil is replaced, the inner wall of the oil tank is thoroughly cleaned, and foreign objects such as metal particles, cotton yarn, and fibers cannot be allowed to enter the oil tank. 2) The pollution of hydraulic oil must be strictly prevented. There should be no water, acid, alkali and other impurities in the oil, and anti-rust oil should not be applied in the oil tank. 3) If the solenoid valve is blocked by foreign objects, the hydraulic system will fail. Remove the solenoid coil, screw out the valve sleeve, pull it out together with the valve core, immerse it in kerosene and turn the valve core gently to clean out the stuck debris, and then gently pull out the valve core to check the foreign matter in the valve sleeve and In case of damage, carefully install the valve core after treatment, so that the valve core can slide smoothly in the valve sleeve. Pay attention to maintaining the original assembly accuracy, and then put them into the valve body together, and then install the corresponding solenoid valve. 4) If the platform is found to fall automatically, check whether the oil pipe joint is leaking oil, and whether there is foreign matter stuck in the lift valve group. 5) Regularly check whether the upper limit switch is out of order and whether the fixing bolts of the walking motor are loose. 6) Non-professionals should not disassemble the parts of the hydraulic system at will. If you are unsure, please do not repair it yourself. The factory can be entrusted to repair. 7) Regularly add lubricating oil to the hinge of the support arm.Safe Operating Procedures1) After the lifting platform is raised, the personnel on the working platform are strictly prohibited from doing any action with large lateral thrust or pulling force. 2) In principle, it is forbidden to adjust the speed of the platform's ascent and descent after installation and debugging. 3) The weight of the carried goods is not allowed to exceed the rated carrying weight. 4) It is strictly forbidden for personnel to enter under the platform during the lifting process. 5) During maintenance, the bottom of the platform must be properly supported and protected before entering the platform for maintenance. 6) It is strictly forbidden to risk overloading operations by means of increasing the pressure of the hydraulic system.7) Do not dismantle or modify parts without authorization.Trouble shooting Trouble phenomenon Trouble reason Trouble shooting Hydraulic motor not working1. The power supply is not connected well2. The normally closed contact of the travel switch is disconnected3. Poor contact at other electrical connectionsChecked them out one by one by electricianOil pump have turning difficulty Excessive load2. The oil pump motor has different shafts3. The oil pump is stuck4. The valve is blocked5. Serious pollution of hydraulic oil1. Load according to rated load limit2. Adjust the coaxiality3. If the motor shaft cannot run by hand, it is confirmed that the oil pump is stuck and the oil pump needs to be replaced.4. After confirmation, disassemble and wash or replace the valve5. Change hydraulic oilThe motor and oil pump are running normally, but the work platform does not lift or the load does not reach the rated weight1. The set pressure of the hydraulic system is too low2. The oil pump suction line leaks, allowing air to enter the hydraulic system3. The oil level in the fuel tank is too low1. Adjust the relief valve of the hydraulic control valve block2. Tighten the joints or replace the sealing ring3. Hydraulic oil must be added to the normal oil levelThe work platform suddenly cannot be loweredSolenoid valve blockRemove and wash the solenoid valve or replace the valve blockCE certificateWhy you choose MORAL LIFT?1. Professional design drawing for the confirmation in case of any misunderstanding.2. All products will be produced strictly according to CE quality management system.3. Every lead rail lift must be tested before delivery,100% qualified. 4. Detailed rust-removing and powder painting process. 5. 5 years warranty for main structure and 1 year warranty for electrical parts. You may like
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.