IPDB › China Industry › Manufacturing & Processing Machinery › Agricultural Machinery
Furfural Production Manufacture Equipment, Design and Fabrication of Direct Fired Heater for Furfural Plant1
Agricultural Machinery, Biomass Briquette Machine, Design and Fabrication of Direct Fired Heater for Furfural Plant, Furfural Plant, Furfural Production
Hangzhou Wellcare Technology Co., Ltd.
Preview:
Product Description From hydrolysis of fiber raw materials, this project is to produce furfural (Furan Formaldehyde).Corn cobs are best materials with high output of furfural. The hydrolysis is easy to control.The main products - furfural, is good organic chemical materials.The by products - furfural residues, can be used as fuel for boiler, used as fertilizer to improve saline and used as materials to produce charcoals. No.Raw material1Corn cob2Cottonseed hull3Forestry waste4Sawdust5Bagasse6Rice huskFurfural Production Process Steps:Step 1:The corn cobs are crushed through crusher machine, and conveyed into reactor through conveyor belt.Step 2:Dilute sulfuric acid with the density of 3% - 10%, are added into reactor. (corn cob : dilute sulfuric acid = 1 : 0.03). And thecorn cobs are adequately mixed with dilute sulfuric acid.Step 3:High pressure steam are input into reactor. The reaction lasts for 5 - 8 hours under the condition of 140 - 230 oC temperature) and 0.3 - 1.0 Mpa (pressure.) The furfural generates with high temperature steam together.Step 4:The furfural steam are condensed through condensers, and conveyed into gas dike tower (column). The waste water is discharged through the bottom of tower; The mixtures (water steam and furfural) are on the top of tower.Step 5:The mixtures will be conveyed into oil water separating tank after condensing.In the upper stratum of tank, the furfural is about 8%, this part of mixtures are conveyed into knockout tower to remove themethyl alcohol. After removing the low boiling by-products, the mixtures are back to gas dike tower.In the lower stratum of tank, the furfural is about 6%, this part of mixtures are conveyed into neutralization tower to remove the acid. After neutralization, the mixtures are conveyed into water separating column. The water in the top of column, will be back to oil water separating tank after condensing. The products in the bottom of column, will be rectification for final products-furfural.Furfural Design Drawings: Furfural Project Equipment Manufacturer Workshop:
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.