IPDB › China Industry › Manufacturing & Processing Machinery › Agricultural Machinery
Stainless Steel Sesame Oil Machine Hazelnut Kernel and Walnut Seed Oil Pressing Equipment, Hydraulic Pepper Seed Oil Press1
Agricultural Machinery, Oil Presser, Hydraulic Pepper Seed Oil Press, Hydraulic Oil Press Machine, Olive Oil Press Machine
Henan Morethan Machinery Equipment Co., Ltd
Preview:
Product Description Product DescriptionFully automatic hydraulic oil pressFull-automatic hydraulic oil press is a small oil press with the simplest operation, the highest oil yield and the least replacement of wearing parts. It can process more than 20 kinds of high-oil crops such as sesame, walnut kernel, tea seed, pine nut (with the best peeling effect) and almond, and has the characteristics of multiple functions. This machine is especially suitable for home use because of its small output (2-8kg/time) and short extraction time (8-12min/time). Compared with the traditional oil press, it is more energy-saving and labor-saving, and occupies a small area. It is an important equipment for modern oil processing.ModelMotorCapacityVoltageSizeWeight6YZ-1801.1kw30kg/h380V 50Hz, three-phase(Customizable)650*650*1150mm520kg6YZ-2301.5kw50kg/h900*800*1450mm780kg6YZ-2601.5kw70kg/h1000*900*1450mm1020kg6YZ-3002kw100kg/h1000*1150*1580mm1550kg6YZ-3202kw120-150kg/h1150*1100*1700mm1800kg6YZ-3403kw120-150kg/h1300*950*1500mm1910kgMain features:1. High production capacity and good quality of refined oil; This machine adopts advanced technologies such as automatic control system and automatic preheating temperature control. The highest pressure of the machine can reach 55 MPa, the oil yield is high and the grease is good. It can produce 35-120 kilograms per hour.2. Simple operation: This machine is small in size, occupies a small area, is easy to learn, understand and operate, has no special requirements for operators, and only needs 1-2 workers to complete production. 3. Small space and low power consumption; During the use of this machine, the power required for operation is lower, which can save a lot of electricity. The height of the machine is at most 1.8 meters and the width is at most 1.3 meters. You can easily put it in your yard or farm and use it immediately. Detailed PhotosMachine operation flow1. Preheat before each oil extraction. The preheating temperature is 50 -70 degrees in summer and autumn, and 70 -90 degrees in winter and spring. The preheating system is automatically controlled without turning off the temperature control switch.2. Hold the handle of the top plate and open it completely: the top plate is 180 degrees from the working position, pad the bottom of the press, and lower the piston in place for later use.3. Run the machine idle for 1-2 times before each oil press. If the hydraulic oil thickens in winter and spring, run it idle for 5-10 minutes to make the oil dilute and easy to operate.4. Drain the fried oil into the oil fume and put it into the press.5. Pad the upper end of the oil press, put the shelf on the upper end of the press and push it into the press. If there is little oil, the oil can be raised when the machine is started, so that the oil can be kept on the upper plane slightly lower than the upper section of the press; Otherwise, it can't meet the top plate, lift the handle of the manual valve and start pressing.6. This hydraulic press must be operated by a special person, and the main machine is not allowed to leave people during the boosting process. When the pressure gauge reaches 55 MPa, the main motor stops working, otherwise the power supply should be turned off immediately, and the pressure gauge should be checked for damage, failure and AC contactor. If there is any damage, it should be replaced immediately, and then it should be turned on for use.7. When the pressure gauge rises to 55 MPa, the electrical control system will stop automatically. When the pressure of the press has dropped to 45 MPa, the electrical control system will start automatically. The pressure of the pressure gauge will rise again, and there is no oil leaking from the oil outlet of the press, indicating that the oil has been squeezed out.8. Turn on the machine, hold the handle of the manual valve and press the valve core of the manual valve, so that the press is lowered to 10mm below the top, lift the handle of the manual valve and open the top plate.9. Turn off the machine, the oil cake rises, and the piston top plate is about 5 mm higher than the upper end face of the press. Turn off the machine, take down the shelf plate and the upper cushion, and take out the oil.10. Press the handle, the piston descends, and prepare for the second press.Raw materials and uses Statistics of oil yield of some materialsOil cropMinitues/timeWeights/time(kg) Handlingcapacity(10 hrs)Yielding rate(%)seasame5-86-9 360-52042-52camellia8-126-9 260-32025-35walnut8-126-9 260-32050-60pinenut8-126-8310-63045-60Note:the above data listed in table is for reference only for different skills of operator,and make sure the crops are dry,full,clean.Factory showHenan Morethan Machinery Co., Ltd. is a professional manufacturer of grain and oil machinery and equipment. The company's leading product, 6YL,6YZ,6YYseries screw oil press, has more than 20 varieties, with high market share, customers all over the world, and more importantly, 70% of the customers are introduced by old customers. More than 300 foreign small and medium-sized oil plants have been provided with oil presses and design schemes. Packaging & Shipping CertificationsFAQQ: Are you a factory or trading company ?A: We are factory with 20 year's manufacturing experiences, and we also have our own trading company . our main products including :screw oil press, seeds roaster, oil filter, oil refinery machine and spare parts etc.Q: How can we verify that you are a factory ?A: You can add our contact information and we will show our factory to you online.Q: If i don't know how to operate this machine ? How can i do ?A: Our machine has been tested ok and make 2-4hours wear-in and then can work.Q:What are cold press and hot press?A: Cold press is pressing dry and raw seeds. usually need to press 2 tims to get maximum oil.Hot press is pressing roasted seeds. usually only 1 time to get maximum oil. peanuts roast to 125~130 degree with 1~2% moisture. (we produce seeds roaster heated by economical fuel.)Q:What serivice do you provide?A: (1) 1year free warranty, whole lifetime maintenance. (2) Supplying wearing parts all year around. (3) Supplying technical solutions at any time. (4) Helping design and plan the oil plants construction. (5) Providing installation video. (6) Developing agents with good policies around world.Q: How can i become a distributor of Henan Morethan?A: Contact us immediately for further details by sending us an inquiry.We will appreciated if these following 2 tips contained in your inquiry.Tips1.The raw material is:_______Tips2.The capacity of the machine you need is:______Thank you and looking forward to your inquiry,we will response immediately.Make order right now! And why?One of our clients called us for buying wearing parts and he told us that his machine bought from us in 2001s. Its really! So, don't worry about the quality. Its beter than your think!
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.