IPDB › China Industry › Manufacturing & Processing Machinery › Rubber Machinery
Liquid Nitrogen Deburring Machine for Precision Plastic Injection Molding Parts1
Rubber Machinery, Automatic Deflashing Machine, Deflashing Machine for Precision Plastic Parts
NANJING PEGE TECHNO MACHINE CO., LTD.
Preview:
Product Description SPECIFICATIONS TECHNICAL INFORMATIONMODEPG-60TPG-80TPG-100T/120TPG-150TMACHINE PHOTO SIZE(L*W*H)1000*1000*1950MM1100*1200*2000MM1200*1250*2200MM1300*1350*2250MMWEIGHT700KG850KG1000KG1500KGPOWERAc380v 50HzAc380v 50HzAc380v 50HzAc380v 50HzELECTRICTY6Kw*3Ph7Kw*3Ph8Kw*3Ph9Kw*3PhTEMPERATURE-130 - +50oC-130 - +50oC-130 - +50oC-130 - +50oCPRESSURE0.5-0.7Mpa0.5-0.7Mpa0.5-0.7Mpa0.5-0.7MpaBARRAEL CAPACITY60L80L100L or 120L150LEFFECTIVE CAPACITY20L30L`40L`50L`WHEEL SPEED3000rpm - 7200rpm3000rpm - 7000rpm3000rpm - 7000rpm3000rpm - 7000rpmCOOLING MEDIALiquid NitrogenLiquid NitrogenLiquid NitrogenLiquid NitrogenOPETATION MODETouch ScreenTouch ScreenTouch ScreenTouch ScreenFRAMESUS304 WITH SOME RED PAINT ON CERTAIN AREAWHEEL DIAMETERAL φ250mmAL φ300mmAL φ350mmAL φ350mmBLASTING SPEED105.7m/s123.3m/s143.3m/s143.3m/sPRODUCT DESCRIPTIONPROCESSING PRINCIPLEWith the decrease of the temperature, rubber/plastic parts enter into hardened, brittle, and crystallized process, its flexibility is gradually lost. It is easily broken by external force when it is under brittle temperature. Flash of the molded products is generally much thinner than finished product itself, it become brittle earlier than product in the low temperature. Cryogenic deflashing machine applies this principle, works in the time range when flash is brittle while products still keeps its flexibility, hit the flashes by high speed projected special plastic media, clear out the brittle burr. The flashes can be easily removed, and the product not be damaged.FUNCTIONSOur machine is widely used in removing the flashed of small rubber and plastic parts like O-rings, gaskets and other molded parts.With the cryogenic processing technology, the flashes are firstly freeze and then shot down the high-speed projection media (Polycarbonate blast). The surface quality of molded rubber and plastic rubber parts can be improved greatly.APPLICATIONS A. O rings, irregular rubber parts with different material and sizes. B. Micro electronic product parts C. Precision elastomeric parts D. Precision injection moulding plastic parts E. R & D part runs F. Die casting products, like zinc aluminum, magnesium alloyFEATURESHigh efficiency: The machine can replace about 60-80 worker to removing the flashes.High precision: It can remove small and hardened flashes which cannot be removed by handworkers and improve precision of the products.Low cost: It also has a feature of lower cost comparing with processing the parts by handworkers.OUR WORKSHOPPACKINGSHIPPING
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.