IPDB › China Industry › Manufacturing & Processing Machinery › Pharmaceutical Equipment & Machinery
Small Standard Jet Mill for Laboratory Use1
Pharmaceutical Equipment Machinery, Air Jet Mill, Medical Jet Mill
QingDao Norville Machinery Equipment Co., Ltd.
Preview:
Product Description Product DescriptionDetailed Photos Product Parameters Model number Finished particle size D97,umProductive capacity kg/h Feed size mmCompressed air consumption m3/min Air compressor power kwGMP013-1500.5-2<10.5~17.5GMO023-1502~20<51.5~215GMO033-15015~40<5322GMO063-15030~100<5637GMP103-15050~200<51075GMP203-150100~400<520132GMP403-150200~800<540250Construction principleWorking principleSimply put, the air mill is to take the high-speed air flow as the carrier, the air flow carrying the material is relative to or with a certain Angle to collide, resulting in the mutual collision of the material body, shear, so that the material is broken. At the same time, the material also collides with the wall to produce crushing effect. Structure (schematic diagram below)GMP series air mill, mainly divided into low pressure area feed under discharge type and high pressure area feed above discharge type two. The former is suitable for ultrafine crushing of ultra-light powder, and the latter is suitable for ultrafine crushing of general materials.Air flow crusher is mainly composed of hopper, feeder, feeder nozzle, air chamber, crushing chamber, lining, adjusting nut, discharge pipe, etc. The material is evenly and quantitatively added to the hopper through the feeding device, and the high pressure air from the feed jet nozzle sends the material into the Lafal nozzle to accelerate the direct grinding chamber again. At the same time, the air in the high-pressure air bag is sprayed into the grinding chamber by a number of nozzles around the grinding chamber (the number of different types of nozzles is different) according to the design Angle of the nozzle into the grinding chamber, because at this time the material in the grinding chamber has been rotating in the grinding chamber, the high-pressure air immediately becomes high-speed logistics, multiple nozzles cause multiple streams of logistics to collide with each other along the tangent line (air grinder base ring), the material is cut, friction and crushed. If the mass exceeds the collection fineness, due to the action of centrifugal force, it is thrown to the inner wall of the grinding chamber and then sprayed by high-speed air flow to continue to crush. When the material is crushed to the set fineness, the quality has reached a certain light, suspended in the center of the grinding chamber, and the product is collected by the low-speed air flow into the receiving system. The setting of fineness mainly depends on the distance introduced by the winding of the discharge system, and the further the distance is, the finer the material is, and the thicker it is on the contrary. Therefore, when the machine type is the upper discharge type, the discharge pipe is reduced to thin and increased to thick; The opposite is true when the machine type is under discharge type. However, no matter what kind of machine, when the gap of the regulating tube is too small, the material received will become coarse when the air flow is rapid. Therefore, users should adjust freely according to the specific gravity and fineness requirements of their products to find the best collection position for the fineness of their products.The main function of the integrated cyclone pulse trap is to remove the solid particles carried in the conveying medium gas as far as possible, to achieve gas-solid separation, and to collect materials. The gas containing particles enters the cyclone separation zone after passing through the clearance of the main impeller of the grinder. When the gas containing particles enters the cyclone separation tube along the axial direction, the air is strongly rotated by the diversion of the guiding tangential direction. The air enters the cyclone body along the cylinder in a spiral shape, and the dense dust particles are thrown to the wall under the action of centrifugal force. Flow down the cylinder wall to the cyclone discharge port and out of the manual butterfly valve at the bottom of the equipment. The rotating air flow shrinks in the cylinder and flows to the center, forming a secondary eddy flow upwards and flowing out through the airway into the pulse catcher. The pulse catcher is mainly composed of body, filter bag, ash cleaning system and electric control system. After the cyclone collector, the fine dust enters the collector with the air flow, and is purified through the filter bag screen and discharged through the outlet of the upper box. The accumulation of dust on the outer surface of the filter bag gradually increases the dust removal resistance. At this time, the controller sends a signal according to the set resistance range, the electromagnetic pulse valve is opened, the high pressure gas in the air bag is quickly ejected into the filter bag, so that the filter bag is instantly expanded, and the dust accumulation of the filter bag is thrown into the ash hopper with the air flow back blowing. The setting of fineness mainly depends on the distance introduced by the winding of the discharge system, and the further the distance is, the finer the material is, and the thicker it is on the contrary. Therefore, when the machine type is the upper discharge type, the discharge pipe is reduced to thin and increased to thick; The opposite is true when the machine type is under discharge type. However, no matter what kind of machine, when the gap of the regulating tube is too small, the material received will become coarse when the air flow is rapid. Therefore, users should adjust freely according to the specific gravity and fineness requirements of their products to find the best collection position for the fineness of their products.1, the grinding chamber structure is made of two whole steel plate CNC machining, without any weld and rotating parts, without any dead corners, easy to disassemble and clean;2, the sealing system processed by the world's top CNC machine tool (American HARDINGE) to ensure that the design performance is reflected;3, grinding completely rely on high pressure air flow driven between the particles collision friction grinding, no medium grinding, high purity, the introduction of impurities is very low, equipment almost no wear, high service life;4, low temperature crushing, without any additional cooling measures, the crushing process not only does not produce heat, but will reduce the temperature, and maintain a temperature state of about 15 ° C, so it is very suitable for the crushing of heat sensitive, low melting point, sugar and volatile materials.5, the use of PLC+HMI intelligent control system, with data recording, query, storage and export functions, can achieve the setting of important parameters, detection, positioning, feedback, alarm, etc., to ensure that the system according to the set parameters long-term stable operation, any failure will make automatic adjustment in time to ensure that the product crushed qualified, to ensure excellent quality;6, according to customer requirements to set the scope of authority, man-machine interface, can achieve one-click operation;7, equipment inside and outside surface fine treatment, reduce material attachment, easy to replace materials and cleaning;8. Narrow product particle size distribution, accurate vertex cutting, adjustable particle size distribution;9, the main parts of the equipment adopts clamp type block connection, easy disassembly and assembly, suitable for a variety of materials;10, the whole grinding system is fully closed production, no dust spillover;11, comply with GMP, C-GMP, FDA certification requirements;12, partly adapt to CIP, SIP online cleaning and online sterilization requirements;13, from material selection to external production, until assembly acceptance, each link has strict quality control, and can provide verification documents. The domestic air mill that really meets the aseptic level requirements should be fully studied in every link of the design concept, and has a qualitative improvement in the compliance with GMP requirements, and can provide a full set of verification documents that meet GMP.Company Profile Qingdao Norwell Machinery Equipment Co., Ltd. is a technical enterprise integrating research and development, design, production, domestic and foreign sales and after-sales service. The company specializes in the production and sales of air mill, mechanical mill, ultrafine mill, hammer mill, needle mill, jaw crusher, vacuum conveying system, mechanical conveying system, dust-free feeding system, mixing machine and other powder deep processing equipment. The company has introduced and mastered the international advanced powder processing and production technology, so that the domestic ultrafine grinding technology has achieved a qualitative leap, in the leading position in the country, the classification accuracy can reach D100 < 5 microns, D97 < 2 microns, and the technology is at the international synchronous level.The company has the industry's top authoritative experts to join, and cooperate with a number of domestic colleges and universities and research institutes, "do not seek full use, but seek to use, inclusive, win-win cooperation" talent management concept makes my company become the powder equipment industry to gather talent highland. The company has a domestic advanced experimental platform, engaged in powder physical property testing, basic theoretical research, large-scale engineering experiments and academic exchanges, and has a strong machining capability and perfect quality management system, making the company a technology-oriented enterprise integrating production, learning and research.Our corporate purpose is to commit to the development of future material technology and advanced particle handling technology. Our business philosophy is not only to provide customers with domestic first-class powder equipment, but more importantly, to provide customers with tailored overall solutions - ultra-refined, functional, intelligent, low carbon, energy saving, environmental protection... This is the mission and responsibility given to us by The Times and customers.The values that the company believes in are to create value for customers and contribute love to society. Common values are a solid foundation for maintaining the stable development of the team, building a good relationship of trust with customers, and gaining social recognition.At present, the mill produced by our company has been widely used in medicine, food, fine chemical, mineral and other industries, equipment in line with GMP, C-GMP and FDA certification standards. Our AdvantagesOur company has a professional experimental team, design team, production team, according to customer requirements for different materials to test the machine, according to the actual situation to match the best model, for the corresponding material experiment issued an experiment report, according to customer requirements to design the most perfect selection scheme. Under the premise of meeting the production requirements, to achieve the most effective energy saving and environmental protection, to create more profits for each customer, save more costs.Our company will strictly test the equipment before leaving the factory, and debug the equipment in the factory to ensure that the equipment is perfect, easy to install after arriving at the customer site, and put into production at the fastest speed.Material analysisGrain size distribution diagramParticle size ratio data After Sales Service1. Provide relevant materials and drawings required by Party A.2, provide small-scale process experiment, in order to select the best process and equipment.3. Assist Party A in equipment selection.4. Design equipment installation methods according to room drawings provided by Party A.5. After the equipment is shipped to the customer's factory, we send engineers to guide the installation by videoThe customer technical personnel master the process principle and the adjustment technology of production parametersCustomer operators can independently operate, maintain and monitor productionCustomer maintenance personnel understand the structure and working principle of the main equipment6. Provide relevant information required.7, the warranty period of 1 year (except for wearing parts), if there is any non-human damage, we free repair or replacement parts. If you have any technical problems, we will give you an immediate reply after receiving the notice from the customer.8. During the warranty period, in case of failure due to the defect of the equipment itself, we promise to replace the defective equipment or parts free of charge within 30 days after receiving the notice from the demander.9, the following circumstances during the warranty period will not enjoy free warranty service, the need for related maintenance costs(1)Damage caused by the user's failure to use, maintain and maintain the product according to the requirements of the user manual;(2) Software and hardware damage or failure caused by improper operation;(3) Without the permission of our company, disassemble machine parts or adjust the working parameters of the system at will, resulting in personnel injury or abnormal work of the machine;(4) Damage or failure of the machine caused by the use of parts other than our company;(5)Damage caused by force majeure;10. Out-of-warranty service: When the equipment exceeds the warranty period and needs to be repaired, we only charge the cost of service and the cost of replacement parts.11, spare parts (including imported parts) to ensure timely preferential supply.12, regular free return visit.13. Provide effective technical support and consultation for a long time; The buyer will be kept informed of technical improvements.Packaging & Shipping
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.