IPDB › China Industry › Industrial Equipment & Components › Gas Generation Equipment & Parts
Desiccant Gas Dryers, Natural Gas Dryer Machine, Compressed Gas Dryer1
Gas Generation Equipment Parts, Natural Gas Dryer Machine, Compressed Gas Dryer, Compressed Gas Dryer, Natural Gas Dryer Machine
Hangzhou Wellcare Technology Co., Ltd.
Preview:
Product Description Product Description Natural gas dryerMedium: natural gasService conditions and basic parameters1. Inlet air temperature: ≤ 80 oC2. Inlet pressure: 0.6-9.9 Mpa3. Pressure loss: ≤ 0.02 Mpa4. Pressure point: 2-10 oC5. Ambient temperature: ≤ 38 oC6. Operating environment: indoor, well ventilated, free of dust and oil7. Installation foundation: no foundation8. Refrigerant: R22 or environment-friendly refrigerant9. Power supply voltage: AC 220 V 50 Hz / AC 380 V 50Hz 10. Cooling mode: air cooling or water coolingThe dehydration unit of feed gas is wet natural gas purification, and the unit capacity is 2.5~50x104 . The elasticity of operation is 150-100% and the annual production time is 8000 hours. The device adopts about 99.74% (wt) triethylene glycol (TEG dehydrating agent, removing the most saturated water in wet natural gas purification, purification by TEG absorber after dehydration dry gas (in the factory water dew point pressure condition < - 5 c) as a commodity to outside gas pipeline. After water absorption, TEG is regenerated by the method of atmospheric pressure fire tube heating and regeneration. After heat exchange, the heat-depleted liquid is cooled and returned to the TEG absorption tower after pressurization for recycling. The gas-forming components produced by the regeneration of the rich liquid are mainly water vapor and contain a small amount of hydrocarbons and gases. In order to eliminate potential safety hazards and avoid direct emissions of environmental pollution, the recycled waste gas from the sulfur recovery device is discharged into the atmosphere after burning in the exhaust gas burning furnace. Features: 1. TEG dehydration process is simple, mature technology, compared with other dehydration method can obtain a larger dew point drop. Good thermal stability. It is easy to regenerate and has the advantages of small loss, low investment and operation cost. 2. A lean/rich liquid heat exchanger is installed before the lean liquid circulating pump, which not only improves the operating conditions of the circulating pump, but also increases the temperature of TEG rich liquid into the triethylene glycol regenerator, effectively recovering part of the heat and reducing the consumption of fuel gas for regeneration. 3. Set a filter on the rich liquid channel to remove the mechanical impurities and degradation products carried in the solution system, keep the solution clean and prevent the solution from foaming, which can reduce the loss of the solvent and is conducive to the long-term stable operation of the device.The direct fire tube heating method adopted in TEG regeneration is mature, reliable and easy to operate. Product Parameters Inlet gas condition 1Flow290.1X104 Nm3/d2Inlet Pressure4.86-6.15 MPa3Inlet Temperature-48.98oC Outlet gas condition 4Flow284.4X104 Nm3/d5Outlet pressure4.7-5.99 MPa6Outlet temperature-50.29oC7H2S≤20g/m38CO2≤3%9Water dew point<-5oCDetailed Photos
Purchasing Agent
Note: Send your message to supplier or manufacturer.
Welcome to our Professional and comprehensive procurement services...
Message:
OK ! We suggest you detail your product requirements and company information here.
Enter between 20 to 4,000 characters.
Your inquiry content must be between 20 to 4000 characters.